Yarisworld Archive

Custom Exhaust...could use some input

22 posts · 8,330 views

SLIK4Original postClearwater, Kansas · Jul 22, 2010#1
I cant find too much on the flowmaster 60 series of mufflers around here...yes i have searched. after debating for a long time on whether i should go axle back from garm or custom cat back, i've decided to go custom. my initial plan is to go 2.25 pipe stock res and run the flowmaster 60 muffler. has anybody heard these mufflers on a yaris in real life? i'm wanting a good deep aggressive sound without being loud and doesn't drone while cruzin. if you think there is any out there better than the flowmaster let me know :)

Replies 21

fmicleSan Jose, CA, USA · Jul 22, 2010#2
I have the Tanabe Medallion which is advertised as "discrete" and "under 93 db" and is hecka loud 🙂 Compared with the stock exhaust anyways. I sound-proofed the floor in the rear which improved the noise level in the cabin a bit, but it's still hecka loud 🙂
marcustoronto, canada · Jul 22, 2010#3
2.25 is too big for this car if you dont have other major upgrades.. 1.75-2.0 diameter is better..but thats just me..
hatchbackkid82. · Jul 23, 2010#4
i think the nitto mid pipe is 2 inches, like marcus said i wouldn't go any bigger than that
SLIK4Thread starterClearwater, Kansas · Jul 23, 2010#5
thanks guys :) i can do 2in no problem. now does any know about the flowmaster 60 series and how it will sound?
cali yarisCanoga Park, CA · Jul 23, 2010#6
2" is good, you'll retain some back pressure and maximize your hp gains.

I used that muffler before, nice rich deep tones. I use Vibrant now, but the Flowmaster is very good.
shinleeaustin tx · Jul 23, 2010#7
i'll try to post up some video clips foryou, but I ran the 60 for over a year, and loved every part of it. It sounds perfect (as do all flowmasters) at full throttle, but being a 60, it was not just subtle, it sounded almost exactly stock at idle. I'm a big fan of that, cuz i hate sitting at a light listening to my muffler, ya know? I think it's the best sounding thing out there personally, but that's your call.
SLIK4Thread starterClearwater, Kansas · Jul 23, 2010#9
thanks alot for the sound clips Shinlee

alright so i'm def goin with 2in piping and more han likely the 60 series thanks to Shin. next ? is should i keep the stock res or go with a glasspack in its place? what exactly would the glasspack do to the sound? and how long of a glasspack should be used?
shinleeaustin tx · Jul 23, 2010#10
well, if you want the drivability (i.e. less noise when you're cruising at highway speeds) the stock res is fine. Hell, irregardless, the stock res is fine if you're running a 2'' pipe. I personally looked at it myself before my exhaust was put in, and it is a straight flow through 2'' center resonator. (That's why I chose 2'', no point going bigger than the smallest point on the system, ya know?) So a glasspack or stock res should net exactly the same power, just differnt noises :)
SLIK4Thread starterClearwater, Kansas · Jul 23, 2010#11
what kind of noise difference would the glasspack make? louder or quieter? deeper maybe?
shinleeaustin tx · Jul 24, 2010#12
my personal experience is it makes it louder, but you wouldn't get much deeper just due to the motor i'd imagine.
SLIK4Thread starterClearwater, Kansas · Jul 24, 2010#13
thanks for all your help shinlee, i appreciate it. you too garm :) last question is i'm not 100% sure on the order of things on the stock exhaust. is there just one resonator after the cat or two? if there are two then which one would i want to replace with the glasspack?
tk-421Dagobah · Jul 24, 2010#14
Originally Posted by shinlee ↑
i'll try to post up some video clips foryou, but I ran the 60 for over a year, and loved every part of it. It sounds perfect (as do all flowmasters) at full throttle, but being a 60, it was not just subtle, it sounded almost exactly stock at idle. I'm a big fan of that, cuz i hate sitting at a light listening to my muffler, ya know? I think it's the best sounding thing out there personally, but that's your call.
This is exactly what I'm looking for. Thanks for the good review, shinlee! 🙌

Originally Posted by shinlee ↑
I personally looked at it myself before my exhaust was put in, and it is a straight flow through 2'' center resonator.
Which resonator did you go with? The smallest diameter one on the Flowmaster site is 3" and offset on both sides:
http://www.flowmastermufflers.com/sh...oducts_id=2299
shinleeaustin tx · Jul 25, 2010#15
the stock resonator on the yaris is fed by a 2'' inlet/outlet resonator. The piping ahead of the res is 2'', but behind it it drops to like 1 3/4'' or something, that's why I went 2'' on from my res back to the 60 which was a 2'' inlet/outlet as well :)
shinleeaustin tx · Jul 25, 2010#16
Picture not included in this copy
60 series

Picture not included in this copy
straight pipe


make sure when you're having your 60 installed, try to find a better mount point than my muffler guy did, I had to go back and fix it up later. A little more time in planning makes for a better placement, cuz it's a tight fit in there, especially when lowered on df210's
TamagoOff Grid · Jul 25, 2010#17
Originally Posted by cali yaris ↑
2" is good, you'll retain some back pressure and maximize your hp gains.

I used that muffler before, nice rich deep tones. I use Vibrant now, but the Flowmaster is very good.
exhaust velocity is more important than "backpressure"
SLIK4Thread starterClearwater, Kansas · Jul 25, 2010#18
thanks for the pics! i was hoping i could use the center inlet offset outlet 2in style and fit it in like this one...Custom Axleback - Pics and vid. you think it would fit?
shinleeaustin tx · Jul 26, 2010#19
5" Thick x 10" Wide x 13" is the dimension of the 60 series

and the dimension of the one in the link you posted is 12" X 7 3/4" X 3 1/4"

I read that as being thinner, narrower, but longer
SLIK4Thread starterClearwater, Kansas · Jul 26, 2010#20
after listening several times and thinking it over i now think i might just copy largeorangefont's setup. i'm loving it more and more
yarr_isWest LA · Jul 26, 2010#21
Originally Posted by fmicle ↑
I have the Tanabe Medallion which is advertised as "discrete" and "under 93 db" and is hecka loud 🙂 Compared with the stock exhaust anyways. I sound-proofed the floor in the rear which improved the noise level in the cabin a bit, but it's still hecka loud 🙂
Did you change the piping...?

The medalion touring is quiet... but not quieter than stock. 93db doesn't mean quiet.. and of course when you change exhaust it'll be louder than stock. I've had MT on other cars and different exhaust on other cars.. and trust me Tanabe is pretty quiet.

They test these by revving up the car at certain rpm and measure the DB level.

Oh and you do know that the Medalion Touring is an axle back right...? Unless you have a different mid pipe that would be why it'll be loud.
fwynnCorona, CA · Jul 30, 2010#22
Originally Posted by Tamago ↑
exhaust velocity is more important than "backpressure"

+1 this is very important.