Yarisworld Archive

Custom Axleback - Pics and vid.

34 posts · 18,611 views

largeorangefontOriginal postSo Cal, OC · Oct 19, 2008#1
Here are the pics of my custom axleback. We simply cut off the OEM muffler and welded this on in its place. We were able to retain all the factory mandrel bent tubing.

I used a 2 inch Imco Turbo series muffler part# T-934. It is a center inlet / offset outlet. The Muffler core is 12" X 7 3/4" X 3 1/4". The total muffler length is 16", and the tip is 2" tubing with a slash cut.

This is quieter than a Magnaflow, with no droning. The change is barely audible in the car with the windows up. It gives a deeper tone, and better sound but not enough to attract any attention from the law. I have since painted the muffler and tip black, so it looks stock to anyone that isn't familiar with the stock "pumpkin" muffler.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy


Here is the video.
Picture not included in this copy

Replies 33

kounj · Oct 20, 2008#2
looking good glad your happy with the muffler.🎉
PETERPOOPOahu · Oct 20, 2008#3
nice idling tone
ddongbaphay · Oct 20, 2008#4
DAYUM!!!!!! That car went low when you sat in it.

On a side note, my friend drove my car away from me the other day. It really does sound like the Yaris commercials.
kimonaHuntington Bch, CA · Oct 20, 2008#5
For those who might like to copy your custom muffler, what is the part # for the muffler?

Also, what is the length of the tail pipe (from can to tip)?

BTW, it looks so much better with the can painted black!
largeorangefontThread starterSo Cal, OC · Oct 20, 2008#6
Originally Posted by kimona ↑
For those who might like to copy your custom muffler, what is the part # for the muffler?

Also, what is the length of the tail pipe (from can to tip)?

BTW, it looks so much better with the can painted black!
Dimensions and part# added.
curikIndonesia · Oct 20, 2008#7
great sound! I totally love it.
LetsrockLakemore, Ohio · Oct 22, 2008#8
Nice killer sound. Great job.
baked_limabeansLouisiana · Oct 22, 2008#9
i might copy you.
AznGoukiCalgary · Oct 22, 2008#10
Whoa, lookin sharp man
largeorangefontThread starterSo Cal, OC · Oct 22, 2008#11
Originally Posted by baked_limabeans ↑
i might copy you.
Do it!
eiiLong Beach, CA · Oct 22, 2008#12
Deep. Nice. You should've followed that mini van and raced it.
kounj · Oct 22, 2008#13
Originally Posted by largeorangefont ↑
Do it!
+1
ChinoCharlesOH · Oct 22, 2008#14
Nice sound without the fart can. Superb!
largeorangefontThread starterSo Cal, OC · Oct 22, 2008#15
Originally Posted by eii ↑
Deep. Nice. You should've followed that mini van and raced it.
Probably would have lost.. 🙁
ChinoCharlesOH · Oct 22, 2008#16
LOL
tk-421Dagobah · Nov 7, 2008#17
Very nice, low key exhaust. I really liked the paint job. 😎
Did you notice any loss at low RPM's?
largeorangefontThread starterSo Cal, OC · Nov 7, 2008#18
Originally Posted by tk-421 ↑
Very nice, low key exhaust. I really liked the paint job. 😎
Did you notice any loss at low RPM's?
Thanks! There was no low end loss at all.
metalsharkMesa, AZ · Nov 9, 2008#19
Both yours and the Dynomax 1777 actually fit better up into the stock heat shield better than the USDM pumkin muffler. After 15,000 miles my Dynomax is getting a little louder.
largeorangefontThread starterSo Cal, OC · Nov 11, 2008#20
Originally Posted by metalshark ↑
Both yours and the Dynomax 1777 actually fit better up into the stock heat shield better than the USDM pumkin muffler. After 15,000 miles my Dynomax is getting a little louder.

Yea, my muffler sits right up in the channel near the framerail. Everything back there is covered in heatshield, like the car was made for this size muffler.
33lamBrisbane · Nov 11, 2008#21
great sound! Love it!!
TheSilkySmoothNew Hampshire · Nov 11, 2008#22
very nice vvrroom. I want a boy to put a turbo can on MY 3 dr. Yaris for me. + I like the gray wheels. I want to have a nice muff too like everybody🙂
-sonja
DerKaiZeRsPerth WA · Nov 12, 2008#23
nice..... 👍
Thej3sta2Orlando, FL · Nov 12, 2008#24
lieky
GnomeBodyUS-V.A. · Sep 23, 2009#25
Do you know how many CFM this muffler flows? I cant seem to find any info on it.
posaunemeisterKansas City, MO · Oct 3, 2009#26
Here's a pic of my axleback: 2 1/4" Dynomax Super Turbo Muffler (I was too impatient to wait for a 2" DSTM, so I purchased one from a local Advance Auto Parts store for $50. It's not the lighter, single-wall $20+ dollar version. I hacked off the muffler with a reciprocating saw (w/ a metal blade) and drove it to the muffler shop where the tech welded on a pipe configuration that would allow such a large muffler to fit under my car. And then I took it off and painted the entire axleback with a high heat, high gloss black paint. I love the end result.

1 attachment not included in this copy

ozmddDFW, TX · Oct 3, 2009#27
Several Yarii around Dallas have removed the pumpkin muffler and simply run a straight pipe from the axle-back coupling to the exhaust tip. Sounds really good, and doesn't seem to affect performance negatively. Obviously, its a weight reduction, and it appears that the pumpkin is mainly a noise-reducer, so not sure if it would have any emissions effect (I doubt it.)
A dyno run needs to be done to determine if it helps/hurts performance, but that would be very simple to do a with/without pair of runs.
In Texas, the car would probably pass inspection if it passes the tailpipe sniff test, unless the tech decides to look for the muffler and knows that its missing. Even then, it would probably pass, but that's the only problem I can see, legal-wise.
Anyone have more experience with this?
lilredrocketDFW, Texas · Oct 3, 2009#28
Actually in Texas if a vehical is newer than 1996 when they started using OBD2 in cars they don't use a sniffer. Also if you remove your muffler in Texas you should fail an inspection if the inspector looks at your exhaust
ozmddDFW, TX · Oct 3, 2009#29
Lil red, it must be different out in FW. Here in Dallas Co., we have the tailpipe sniffers no mater what the year. We're one of the EPA smog counties, so it a little more stringent. We have the lame California-type low-emissions gas too. Cleaner, but less HP (teeny-weeny bit, albeit.)

Also, LRR, you would still have a muffler and 2 cats in the midpipe section, so I'll bet a really clean weld job would get by a lot of inspectors. If they ask, just say "the muffler is right there in the middle! " :)

Your idea of either keeping a stock muffler set-up in the garage for inspections or clamping/welding a hollowed-out muffler body around the straight pipe is the best idea.
lilredrocketDFW, Texas · Oct 3, 2009#30
I'm not saying you are wrong but I am a certified state inspector and I have done inspections in both Denton and Tarrent counties and never used a tailpipe sniffer for inspections unless the vehical was older than 1996 or the OBD2 link was not reading.
fmicleSan Jose, CA, USA · Apr 28, 2010#31
Originally Posted by ozmdd ↑
Lil red, it must be different out in FW. Here in Dallas Co., we have the tailpipe sniffers no mater what the year. We're one of the EPA smog counties, so it a little more stringent. We have the lame California-type low-emissions gas too. Cleaner, but less HP (teeny-weeny bit, albeit.)
So if I move to Austin my supercharged Yaris would still be illegal? 😛
lilredrocketDFW, Texas · Apr 28, 2010#32
Shouldn't be... I'm not 100% sure they have emissions testing there. It's not a state wide deal it is more county-city level. But there is a safty inspection across the state. There are 2 members that are boosted in TX not sure if either one has had to get an inspection yet
darkMINIC-Springs · Dec 12, 2010#33
Originally Posted by posaunemeister ↑
Here's a pic of my axleback: 2 1/4" Dynomax Super Turbo Muffler (I was too impatient to wait for a 2" DSTM, so I purchased one from a local Advance Auto Parts store for $50. It's not the lighter, single-wall $20+ dollar version. I hacked off the muffler with a reciprocating saw (w/ a metal blade) and drove it to the muffler shop where the tech welded on a pipe configuration that would allow such a large muffler to fit under my car. And then I took it off and painted the entire axleback with a high heat, high gloss black paint. I love the end result.
I used the little $25 Dynomax muffler and installed a Harley baffle to tone it down nicely. The baffle also adds a little back-pressure that may be lost in the high-flow muffler. Not sure if it matters much in that respect.
tk-421Dagobah · Dec 4, 2012#34
Just installed this very muffler along with some 2" resonator-back piping, and I have to say that I love the sound and performance so far. 👍