Yarisworld Archive

Need a "Mild" Drop

84 posts · 49,969 views · page 2 of 2

Replies continued

WeeYariGeorgetown, Ontario, Canada · May 28, 2010#51
Such a different car now.

That license plate has been with you for a lot of years now hasn't it. Don't see too many anymore with that number/lettering format.
toy_torontoThread starterTarrana, Canada · May 29, 2010#52
You noticed 😉 I've had those plates ever since I got them on my 91" Accord EXR, then they went on my '95 Accord EX then now on my Yaris 🙂

As far as the looks, I didn't expect the subtle changes I made could make such a huge difference. For example, IMO it is much cleaner once I removed the dealer installed side mouldings and hood deflector, and after I debadged the car. It also appears wider ever since I dropped it by only an inch.

All the mods I've done so far had made a positive impact including the recent tint on the windows. I even installed an armrest today and man, do I feel more relaxed while driving.

Picture not included in this copy


Next are some fogs and a rear sway bar then I can say I'm done!

.
CtrlAltDefeatIndianapolis IN · May 29, 2010#53
Originally Posted by toy_toronto ↑
Next are some fogs and a rear sway bar then I can say I'm done!
i doubt it! 🙄 😁
BilliamUSA · May 29, 2010#54
Your car looks great!! Get some yellow fogs. The lenses would look good against the color of your car!

BTW, you'll be better off buying the bezels from your local dealer regardless of what foglamp you go with. There just aren't any "kits" that have the right bezels for us. I came across one ebay kit, but then read that the fitment for the bezel was terrible.

I ended up buying the bezels from my local dealer and a yellow ebay foglamp kit. Doesn't really matter which year or body style you get, as the actual lamps are the same. In fact, my kit is for an "07 sedan".

Here are the part numbers for the OE bezels.

Left side = #81482-52260
Right side = #81481-52330

Perfect fit.

Picture not included in this copy
toy_torontoThread starterTarrana, Canada · May 29, 2010#55
Originally Posted by CtrlAltDefeat ↑
i doubt it! 🙄 😁
Damn that's exactly what my wife said!

Originally Posted by Billiam ↑
Your car looks great!! Get some yellow fogs. The lenses would look good against the color of your car!

BTW, you'll be better off buying the bezels from your local dealer regardless of what foglamp you go with. There just aren't any "kits" that have the right bezels for us. I came across one ebay kit, but then read that the fitment for the bezel was terrible.
[/IMG]
Thanks for the tip and the part numbers. I think the yellows on your absolutely red looks hot 👍

I think initially I'll stick with the "smoked" theme since I got the windows tinted. However, I think once the wiring (harness, relays, etc.) are installed the lamps seem easy enough to swap so there really is no reason to NOT have 2 sets of them, lol.

(*thanks for the nice pic, managed to photoshop the fogs onto mine for 'visuals')

Picture not included in this copy

Picture not included in this copy
BilliamUSA · May 29, 2010#56
Originally Posted by toy_toronto ↑
....However, I think once the wiring (harness, relays, etc.) are installed the lamps seem easy enough to swap so there really is no reason to NOT have 2 sets of them...
Oh yes...once the wiring is in place, you can plug-and-play what ever lamp you want. I just wish someone made a decent bezel for the '09+ Hatch...but nothing yet. The dealer is our best option.

Tons of options on ebay. Here's an example of a smoked lamp. ---> http://cgi.ebay.com/ebaymotors/2006-...Q5fAccessories

Lots more here. ---> http://shop.ebay.com/?_from=R40&_trk...All-Categories
StragglerXOxnard · May 29, 2010#57
ur car look awesome!..i need to grow a pair too and just get those trd red springs. just got my trd swaybar yesterday, installed in 30 mins with no challenge and i'm ready for another upgrade hopefully next weekend. i'm doing all mine with trds coz i like d red accent around d car. update us with d ride quality and if u encounter any rubbings.
toy_torontoThread starterTarrana, Canada · May 29, 2010#58
Originally Posted by Billiam ↑
Oh yes...once the wiring is in place, you can plug-and-play what ever lamp you want. I just wish someone made a decent bezel for the '09+ Hatch...but nothing yet. The dealer is our best option.

Tons of options on ebay. Here's an example of a smoked lamp. ---> http://cgi.ebay.com/ebaymotors/2006-...Q5fAccessories

Lots more here. ---> http://shop.ebay.com/?_from=R40&_trk...All-Categories
Thanks for the links. Now I've got my eye on a pair of those white halo projector fog lights -- wow.

Originally Posted by StragglerX ↑
ur car look awesome!..i need to grow a pair too and just get those trd red springs. just got my trd swaybar yesterday, installed in 30 mins with no challenge and i'm ready for another upgrade hopefully next weekend. i'm doing all mine with trds coz i like d red accent around d car. update us with d ride quality and if u encounter any rubbings.
😆. Thanks, you really should go for it. It wasn't hard at all as long as you have the right tools.

I was going to go with TRDs but I was really looking for the least amount of drop. It turned out the drop is actually almost 1.5" (measured fender to center of wheels, 15" before and now down to ~13.5").

I'm quite happy with it lowered, stance and the ride feel. I doubt I'll have rubbing issues since there's still quite a bit of clearance left between my fender and wheels plus my rims are ET +40. In fact I went with my 3 coworkers for lunch last week (ave. weight is 170lbs/person) and still had room between the fenders/tires.

Anyway, today turned out to be another beautiful afternoon in the city. And while browsing through the forums I came accross this meteorite metallic yarii. So I thought I got some free time... why not give it a shot? So I took a trip down to my local HD to pickup weatherstripping and spent about 2 hours on the car this afternoon. Initially I thought it would look cheap but on the contrary it does NOT look 'ghetto' at all.

Here's what I got and I think I will be keeping it for a little while :)

Picture not included in this copy

Click here for higher res image.

Picture not included in this copy


.
thebarberGrand Rapids, MI · May 29, 2010#59
never been a fan of the home depot lip, but you're pulling it off in the pic
toy_torontoThread starterTarrana, Canada · May 29, 2010#60
Can't wait to see your new HID headlights on.

More pics of the HD lip after a car wash. .$14.99 + roll of double-sided tapes 😉

Picture not included in this copy

Picture not included in this copy

Click here for hi-res shot.


Picture not included in this copy

Click here for hi-res shot.


.
GrimlockGTHalifax, Nova Scotia · May 30, 2010#61
Originally Posted by toy_toronto ↑
As far as the looks, I didn't expect the subtle changes I made could make such a huge difference. For example, IMO it is much cleaner once I removed the dealer installed side mouldings and hood deflector, and after I debadged the car. It also appears wider ever since I dropped it by only an inch.

Next are some fogs and a rear sway bar then I can say I'm done!
I like the hood deflector. I think the Yaris looks more, dare I say, sporty with it. I also noticed that mine now looks wider too since I dropped it and added 17" wheels.

I got my fog lights from MI and bought the factory bezels from Toyota. They cost almost as much as the fog light kit. 🤷
BilliamUSA · May 30, 2010#62
Originally Posted by GrimlockGT ↑
....factory bezels from Toyota. They cost almost as much as the fog light kit. 🤷
Really? How much did you pay? I think I paid $16 per pop. $32 for a perfect fit is worth it to me though. The pic I saw of the one aftermarket '09+ HB bezel that's available looked awful...with gaps along the top.

$32 for bezels + $39 for fogs = $71 total....not bad IMO.
GrimlockGTHalifax, Nova Scotia · May 30, 2010#63
Originally Posted by Billiam ↑
Really? How much did you pay? I think I paid $16 per pop. $32 for a perfect fit is worth it to me though. The pic I saw of the one aftermarket '09+ HB bezel that's available looked awful...with gaps along the top.

$32 for bezels + $39 for fogs = $71 total....not bad IMO.
I'm embarrassed to say, but each bezel cost me $41 CDN.

If you think that is bad, I was hoping to get the TRD 18" wheels and the dealer quoted me $562 per wheel. 😲 I was expecting around $300 per wheel which would have been bad enough.
toy_torontoThread starterTarrana, Canada · May 31, 2010#64
Originally Posted by Billiam ↑
Really? How much did you pay? I think I paid $16 per pop. $32 for a perfect fit is worth it to me though. The pic I saw of the one aftermarket '09+ HB bezel that's available looked awful...with gaps along the top.

$32 for bezels + $39 for fogs = $71 total....not bad IMO.
Hmm.. why the difference in pricing and how did you get them so cheap?

Normally dealerships charge an arm and a leg.. I would've expected to pay like GrimlockGT for a pair of those shrouds. 🤷

.
thebarberGrand Rapids, MI · May 31, 2010#65
Originally Posted by toy_toronto ↑
Hmm.. why the difference in pricing and how did you get them so cheap?

Normally dealerships charge an arm and a leg.. I would've expected to pay like GrimlockGT for a pair of those shrouds. 🤷

.
US vs Canada pricing

and/or billy has some connections *nudge*nudge*wink*wink*
BilliamUSA · May 31, 2010#66
Originally Posted by thebarber ↑
US vs Canada pricing

and/or billy has some connections *nudge*nudge*wink*wink*
Could be a little of both. 😎
toy_torontoThread starterTarrana, Canada · Jun 2, 2010#67
Billiam, c'mon you must hook me up! 😁
BilliamUSA · Jun 2, 2010#68
Originally Posted by toy_toronto ↑
Billiam, c'mon you must hook me up! 😁
I'm afraid I could easily wear out my welcome concerning my "good deals". But having a good relationship with your local parts department's manager does help. 😉
toy_torontoThread starterTarrana, Canada · Jun 3, 2010#69
Lol, totally understand -- don't ever spoil a good thing going! :)
toy_torontoThread starterTarrana, Canada · Jun 3, 2010#70
I have a running list of things I'm looking to buy, I wonder if anyone here is thinking of unloading theirs before I contact vendors to place my order?

Here are some of the items I'm looking for:


.
CtrlAltDefeatIndianapolis IN · Jun 3, 2010#71
Originally Posted by toy_toronto ↑
I have a running list of things I'm looking to buy, I wonder if anyone here is thinking of unloading theirs before I contact vendors to place my order?

Here are some of the items I'm looking for:


.
I think mi has pretty much the best prices youll find for new... good luck finding those used :)
thebarberGrand Rapids, MI · Jun 3, 2010#72
Originally Posted by toy_toronto ↑
I have a running list of things I'm looking to buy, I wonder if anyone here is thinking of unloading theirs before I contact vendors to place my order?
i had the shifter extension

w/o the nst short shifter, you'll hate it....hard to get into 2nd and 4th

i also hated the nst short shift kit as it never felt like it was getting into gear

oem ftw

for the hood seal, just go back to home depot and get some foam and double sided tape
toy_torontoThread starterTarrana, Canada · Jun 4, 2010#73
Actually i have an A/T (wife didn't want manual). I wanted an additional 2" shifter height extension for ergonomics because of the armrest I recently installed (shift knob now is too low to rest hand on and wanted to raise it up a bit).

Perhaps I need a taller shift knob instead lol.

I'll check out HD again for some rubber/foam weatherstripping, thanks for the tip.



.
toy_torontoThread starterTarrana, Canada · Jun 4, 2010#74
Originally Posted by CtrlAltDefeat ↑
I think mi has pretty much the best prices youll find for new... good luck finding those used :)
I was hoping 😁
white_riceOntario, Canada · Jun 4, 2010#75
I really like that HP lip that you've done and considering it myself now. On holidays this coming week so might be making a trip to my local Home Depot. :)
toy_torontoThread starterTarrana, Canada · Jun 4, 2010#76
When you do, this is the stuff you want. It's ultra soft and flexible as heck, like a memory foam almost.

It should withstand any climate, they're heavy duty and meant to go under your garage door bottom, lol.

Picture not included in this copy

Part Number: Garage Door Bottom




.
white_riceOntario, Canada · Jun 6, 2010#77
Originally Posted by toy_toronto ↑
When you do, this is the stuff you want. It's ultra soft and flexible as heck, like a memory foam almost.

It should withstand any climate, they're heavy duty and meant to go under your garage door bottom, lol.

Picture not included in this copy

Part Number: Garage Door Bottom




.
Thank you very much. Your post was VERY helpful with the SKU and all mentioned. I went this afternoon and picked up the exact item you mentioned. Is there any write-up somewhere on YW on a easy install procedure, as I really like how yours turned out and would like mine to look the same.
toy_torontoThread starterTarrana, Canada · Jun 6, 2010#78
A member posted a pic on this thread who also owns a meteorite and gave me the idea, so off I go and I searched this site and everywhere for this infamous "home depot" front lip 😆. They are out there on audis, G35s, subarus, hondas, toyotas etc. I even found a Civic thread dedicated with 30+ pages on this, some looked pretty cool/decent and are tastefully done, but others the others not so much lol.

You might notice other peoples HD lip look sort of flared out a bit more compared to mine which is less 'aggressive'. Just make sure to do it when it's nice and warm outside for better adhesion to the bumper and surfaces are clean. Here's a good tutorial you can try but I did not do the zip ties.

Good luck :)


.
white_riceOntario, Canada · Jun 8, 2010#79
Well I did the custom lip install last night. I removed the front bumper to make it easier. I also had to do a couple of other things anyways since I bought Toyota OEM foglight shrouds since the ones from MI had not so perfect fitment. I also put on a couple deer whistlers in behind since I've come way too close, living out on the boonies. Back to the main topic, mine didn't turn out HALF as well as yours. I couldn't figure out which direction to put it in so ended up cutting the stripping down the centre and well I'm just not happy with it whatsoever. I'll leave it there for now but if it falls off I won't be overly disappointed. LOL
toy_torontoThread starterTarrana, Canada · Jun 8, 2010#80
Hey there, sorry to hear the HD lip install did not turn out well 😕

I must’ve lucked out since I managed to get it on the 1st attempt. By the way, what part of ontario are you located at?

Originally Posted by white_rice ↑
I couldn't figure out which direction to put it in so ended up cutting the stripping down the centre and well I'm just not happy with it whatsoever.
Here's a quick diagram of the lip and which direction I mounted it on mine:

Picture not included in this copy

Picture not included in this copy



.
WeeYariGeorgetown, Ontario, Canada · Jun 8, 2010#81
You've done a nice job with that HD lip there toy.

Now can I get you to satisfy my morbid sense of curiousity? Take some of your leftover door seal, and see if it can be affixed to the underside of the rocker panels.
toy_torontoThread starterTarrana, Canada · Jun 8, 2010#82
Thanks weeyari.

Unfortunately since I only had a couple of small pieces left from the job they have long been discarded… However though, I think you might be onto something here. Hmmm. 😉


.
white_riceOntario, Canada · Jun 8, 2010#83
Thanks Toy. Your diagrams are extremely helpful with all the detail and specs BTW. In fact, I see now where I messed up. I cut off the discarded the section that you would have stuck to the bumper. That very small thin lip on the bottom of the other piece is what I attached to the bumper. By cutting my seal in half you can clearly see where my cuts were made and it's not such a pretty picture. I will roll with it for now and may tackle it again down the road properly.

I'm in located in Scotland, south-west of Brantford.
toy_torontoThread starterTarrana, Canada · Jun 8, 2010#84
Ah now it makes sense what you ended up doing. At least you'll know what to do next time.

I thought perhaps you lived not too far from me I would've loved to help you out. Turns out we're at least 2 hours apart 🙁

I live in Ajax (east of GTA).


.