Yarisworld Archive

front splitter/lip Tape?

11 posts · 8,741 views

teejayOriginal postsocal · Dec 14, 2008#1
I bought one of these universal splitter/lip do you think double sided tape would be fine? its a small piece of rubber...

Picture not included in this copy

Replies 10

cali yarisCanoga Park, CA · Dec 14, 2008#2
it's fine -- until if falls off. But really, is there some reason for not using a few screws underneath?

Looks good, by the way!
Kaotic LazagnaCentral Valley, CA · Dec 14, 2008#3
I'd use screws. One meet with a speedbump, and there it goes.
tuckevalastinDelaware/Connecticut · Dec 14, 2008#4
screw it
PHXDEMONPhoenix, AZ · Dec 14, 2008#5
Screw it on. Double sided tape holds pretty well but I can garuntee that won't last more than about a month.
teejayThread startersocal · Dec 15, 2008#7
ohh thats not my car it was just an example ill get mines up in a bit... it was about $30 on ebay
DuckinOutSoCal · Dec 15, 2008#8
you spent $30+shipping on that universal front lip???
not to be rude or anything but you know you can buy that at home depot for $14.99, the bf wanted to try it out on the yaris but i don't think it would look good, but after you post some pics then i might reconsider

if you need a quick diy ... got it from the bf's old forum

Picture not included in this copy
Once the double sided tape is installed, begin installing the trim. Align the crease of the trim with the edge of the double sided tape. You can achieve a pretty nice line if you are careful
Picture not included in this copy

Instead of using screws to give the lip extra hold, I used black zip ties. I drilled holes along the bottom of the trim through the bumper and ran the zip ties through. They snug up great and seem to cover more area than screws.
Picture not included in this copy
zuberioMississauga, ON · Dec 15, 2008#9
holy crap that's a lot of zip ties.
jinxorSydney, Australia · Dec 15, 2008#10
nice work.... the zip ties will hold better than the screws...
Kaotic LazagnaCentral Valley, CA · Dec 15, 2008#11
hahaha, I planned on making a rear lip extension out of that "Home-Depot special" after seeing my friend do it on his 240.