Yarisworld Archive

Beefing Up my Yaris

84 posts · 21,701 views · page 2 of 2

Replies continued

cali yarisCanoga Park, CA · May 21, 2010#51
my i/c is pretty small and we are getting beautifully cold intake temps under high boost.
advocatelocation · May 23, 2010#52
I'm not getting why the xA kit with a modified downpipe is such a horrifying idea

If you think you can source a kit cheaper from independent sources that's understandable...

If you're trying to avoid management like the devil, then I understand as well.

But if you accept the fact that you need a tune, HKS is a proven company...
RacerFreakXXXThread starterSomers NY · May 24, 2010#53
HKS is good, but bot worth the extra $$$$... that HKS kit is mostly turbo, I'll take a Garrett turbo for half the cost. My next mods are diff, clutch, and flywheel on the car... then turbo. By that time Micro Image's kit will be ready, that or I've emailed Zage about buying a turbo kit w/o the turbo. If they say they will, I may buy the kit. Seeing as all I would need to do is buy, besides a Garett turbo, is a stock oil pan, tap it, then get an EMS, and a tune. I'd rather go with Micro Image's kit, figure less than 1k for manifold and down pipe, less than 1k for turbo and that gives me about 1-2k for the rest.
RacerFreakXXXThread starterSomers NY · May 24, 2010#54
I'm really considering buying the zage turbo kit w/o the turbo:

"Normally we don't recommend doing so because every part of our turbo kit is designed to fit each other, so if you do not buy the turbo in the kit then you will have to do modification yourself, if you are installing them on 1NZ-FE engine.

However, if you dont' mind doing the modification yourself our Yaris turbo kit would be USD$1000. "

Picture not included in this copy


should I do it?
RacerFreakXXXThread starterSomers NY · May 24, 2010#55
yea I was thinking about not getting the pan too, it'll knock off $100. I only want to use a GT25. It's a daily driver and having 120whp would be amazing at this point, I can't imagine 140-150whp. I trust Garrett more though, so that will be my route if I get the Zage.
TatshRichmond, BC · May 24, 2010#56
How much is the zage kit with everything?
ParmasML · May 25, 2010#57
Originally Posted by cdydjded ↑
Also dont even bother using their pan. If you want to save some $$ tell them to keep the oil pan. It does not work.
I noticed that many "kits" of the yaris include a different oil pan which looks about the same size (no increase in oil capacity) although I am not sure its the same material as stock

Just curious about it ... 🙄
RacerFreakXXXThread starterSomers NY · May 25, 2010#58
The kit costs about $1,800 shipped... but i'd rather spend $900 on a turbo $900 on a kit w/o turbo and pan and buy the res and still be under $3k. The only oil pan that looks decent is the Greddy and it's probably not worth the money.
advocatelocation · May 27, 2010#59
Originally Posted by cdydjded ↑
The Zage kit pan is cast aluminum with cooling fins. It does not hold any more oil than the factory stamped steel pan. The pan fits but the oil drain position is completely wrong. It located towards the front of the car & does not drain correctly.
thank god for product research
TamagoOff Grid · May 28, 2010#60
Originally Posted by cdydjded ↑
The Zage kit pan is cast aluminum with cooling fins. It does not hold any more oil than the factory stamped steel pan. The pan fits but the oil drain position is completely wrong. It located towards the front of the car & does not drain correctly.
why not jack the rear of the car up?

logic > product research
Focus_Sh1ftNew Jersey · May 30, 2010#61
Originally Posted by RacerFreakXXX ↑
I'm really considering buying the zage turbo kit w/o the turbo
This seems like a pretty decent option... Although fuel management still needs to be addressed unfortunately.

Has anyone on YW purchased the entire kit yet and got it working? And if so, was there any fitment issues with piping/etc? (besides the crummy oil pan that is)

BTW, if you go zage with a GT2554 and it works well, I'm totally going to copy you 👍
RacerFreakXXXThread starterSomers NY · May 30, 2010#62
I've read through a lot of material and actually found that that does work... however I would just weld a bung onto the stock oil pan and then for EMS, you are basically on your own. Greddy seems to be the best, from what I can see for EMS. Your other options are a stand alone EMS. With that you would have to completely remap and fine tune everything. I don't know If I'm even considering turbo with the FT-86 around the corner. It seems to have too much press to be put back any longer and by the time it comes out I will be turbo. Turbo or putting the money towards a 2nd car, the second car option seems to really make more sense. As much as I would like more power, it's a big decision, even If I am only looking at 3k with a tune.
YodaFL · May 30, 2010#63
Originally Posted by Focus_Sh1ft ↑
This seems like a pretty decent option... Although fuel management still needs to be addressed unfortunately.

Has anyone on YW purchased the entire kit yet and got it working? And if so, was there any fitment issues with piping/etc? (besides the crummy oil pan that is)

BTW, if you go zage with a GT2554 and it works well, I'm totally going to copy you 👍
I have the kit in my closet for about a month now just dont have the time to put it all on. Wife had a baby and i am working double shifts. Trying to locate a camera to take some pics of it for peterpoop
Focus_Sh1ftNew Jersey · May 31, 2010#64
Originally Posted by RacerFreakXXX ↑
Turbo or putting the money towards a 2nd car, the second car option seems to really make more sense.
If you're in need of a second car then I couldn't agree more with dropping the turbo idea and grabbing an FT-86 instead 👍

Originally Posted by Yoda ↑
I have the kit in my closet for about a month now just dont have the time to put it all on. Wife had a baby and i am working double shifts. Trying to locate a camera to take some pics of it for peterpoop
Not to go off topic but: I could have sworn you were building your own kit? Either way, I'm really eager to see you get this kit on ... 🤤

What piggyback are you using?
RacerFreakXXXThread starterSomers NY · Jun 2, 2010#65
found a decent deal on a turbo manifold for our car for only $250:

http://www.dezod.com/pd-1nzfe-turbo-manifold.cfm

Picture not included in this copy

Still considering Zage Kit because of the down pipe and piping.
cali yarisCanoga Park, CA · Jun 2, 2010#66
That's a dollar more than I charge, and I include shipping. 😉
RacerFreakXXXThread starterSomers NY · Jun 3, 2010#67
Price drop? last time I looked it was about $440 for your manifold.
Kongo-OttoGermany · Jun 3, 2010#68
Originally Posted by RacerFreakXXX ↑
found a decent deal on a turbo manifold for our car for only $250:

http://www.dezod.com/pd-1nzfe-turbo-manifold.cfm
I´ve never seen such a poorly engineered manifold before. I mean serious ... exhaust gas from 1 and 4 collides, 2 and 3 are blowing against a "wall". The guy who made this thing only took care of the space he needs to mount the turbo and nothing more.
cali yarisCanoga Park, CA · Jun 3, 2010#69
You've never seen a log manifold before?

the one shown is pretty much the same as I have, the system seems to be just fine with it. My tC also uses this design.

an equal-length design would be great, but I'm blowing 24 psi at this design and it works.
Kongo-OttoGermany · Jun 3, 2010#70
I don't doubt it works but i think it is far from optimal when it comes to exhaust gas flow. So in my opinion space is the only reason for this kind of manifold. Maybe i am wrong.
RacerFreakXXXThread starterSomers NY · Jun 3, 2010#71
o0o, I just noticed the price drop (I have limited internet at work, lol)... are planning to make your kit with piping Garm?
TamagoOff Grid · Jun 3, 2010#72
Originally Posted by RacerFreakXXX ↑
o0o, I just noticed the price drop (I have limited internet at work, lol)... are planning to make your kit with piping Garm?
for what? a front mount? a top mount?
RacerFreakXXXThread starterSomers NY · Jun 3, 2010#73
front mount, pshhh... I don't want no top mount
TamagoOff Grid · Jun 3, 2010#74
Originally Posted by RacerFreakXXX ↑
front mount, pshhh... i don't want to top mount
you've never ceased to prove my point about you
RacerFreakXXXThread starterSomers NY · Jun 3, 2010#75
ehhh... whatever, I'll do what I want

... I edited my horrible spelling, lol
TamagoOff Grid · Jun 3, 2010#76
enjoy your pointless turbo lag
PETERPOOPOahu · Jun 3, 2010#77
lol
rob323Joyner, Brisbane · Jun 3, 2010#78
bah! just run antilag if you want real throttle response 😉.
RacerFreakXXXThread starterSomers NY · Jun 4, 2010#79
Originally Posted by Tamago ↑
enjoy your pointless turbo lag
You really think there will be enough turbo lag on a GT2554R turbo front mount to make a difference? These turbo's are at max boost at 2.5-3k and spool up to 7-8k, which I assume you know. Plenty of people run these turbo's and I never read/hear about turbo lag being an issue. Also, if you didn't know: turbo lag is the time it takes for the turbo to overcome its rotational inertia or basically spool up. .IMO 2.5-3k isn't bad and if I'm doing under 3k I'm probably not trying to go fast 👍
cali yarisCanoga Park, CA · Jun 4, 2010#80
^ I didn't have any lag at all with the GT25. very nimble and quick, and I have a front mount.
rob323Joyner, Brisbane · Jun 4, 2010#81
Originally Posted by RacerFreakXXX ↑
Also, if you didn't know: turbo lag is the time it takes for the turbo to overcome its rotational inertia or basically spool up. .IMO 2.5-3k isn't bad and if I'm doing under 3k I'm probably not trying to go fast 👍
That's only a small part of it, the other part of the "lag" which Tamago is referring to is the time it takes to re-pressurise the intake system from when you lift off and the bov releases any pressure in the system. this is the "lag" that is most noticable. The smaller the turbo, the longer it takes to re-pressurise everything. That is why they invented antilag, it keeps the turbo spooling while off the throttle and keeps the intake pressurised.
RacerFreakXXXThread starterSomers NY · Jun 4, 2010#82
Originally Posted by cali yaris ↑
^ I didn't have any lag at all with the GT25. very nimble and quick, and I have a front mount.
Lol... This is exactly what I mean. If I was running huge piping and exhaust I could see turbo lag being a problem. Also I'm not trying to build a race car, just a daily driver with a bit more pep. Yes, if I could afford a RSX-S I would buy one, but I can't. Turbo Yaris is actually a perfect dd car for me and I'd rather have a toyota :D
RacerFreakXXXThread starterSomers NY · Jun 5, 2010#83
Originally Posted by cdydjded ↑
Racer: do yourself a favor an ignore ANYTHING Tamango has to say.....
haha, I learned that a long time ago.
PETERPOOPOahu · Jun 5, 2010#84
Ditto. hehe