IsLNdbOiOriginal postLas Vegas, NV · Apr 13, 2010#1One of the things I don't like about the Tanabe Medalion Touring (or any aftermarket exhaust) is the additional noise it introduces inside the car.
I just saw this on the MicroImage store:
http://shop.microimageonline.com/Tan...ust-T310SB.htm Will this help lower the noise from the exhaust inside the car?
I emailed Tanabe a couple of weeks ago and asked them this:
Is there a silencer or baffle that works with the Medalion Touring that was installed on my Yaris during the R&D session?
I really want to cut down on the interior noise that's been added since installing the Medalion Touring.
this is what they said:
We don't have anything as far as that goes for the Medalion Touring. If you really must cut down on the noise some more, you could take your car to an exhaust shop and ask if they can install another resonator somewhere in the middle of the piping.
Replies 25
sternzMilford, PA · Apr 13, 2010#2I'm looking to quiet my car down too after the install my Medalion Touring exhaust, It's kind of loud in the cabin.
Notice the same Silencer at MicroImage and did a little search and came across these
aftermarket silencers and don't know which one to get if it will help at all with the noise.
fmicleSan Jose, CA, USA · Apr 14, 2010#3I kinda got used to it... I just have to turn the CD player louder now 😉 Post your findings here though, although I don't think I'm willing to spend more than $20 to cut down the noise a bit.
Also, just a thought, but if cabin noise is the problem, we should be looking into insulating the cabin better, at least in the back, that should help and would probably be cheaper, albeit more work...
largeorangefontSo Cal, OC · Apr 14, 2010#4Yes an addtional resonator will quiet the exhaust down a bit.
I run a turbo style muffler, quieter and much cheaper than the Tanabe. There is just a very slight tone change in the cabin.
Thread here:
Custom Axleback - Pics and vid. Picture not included in this copy Originally Posted by
largeorangefont ↑ Yes an addtional resonator will quiet the exhaust down a bit.
I run a turbo style muffler, quieter and much cheaper than the Tanabe. There is just a very slight tone change in the cabin.
Thread here:
Custom Axleback - Pics and vid. Picture not included in this copy
I have something similar.definitely the best choice and you save $$.
cali yarisCanoga Park, CA · Apr 14, 2010#6Sorry guys, found out today it doesn't fit the Medalion Touring, only the Concept G.
IsLNdbOiThread starterLas Vegas, NV · Apr 14, 2010#7^
Awww too bad.
Anyway, I didn't buy the Medalion Touring. Tanabe gave it to me for free for participating in their R&D session.
So the only way to silence the Medalion Touring / reduce noise inside the car from it is to add a resonator?
Will this make the Medalion Touring stick out more from the back of the car / extend its length?
Where would I get this resonator and how much would it cost to get it installed?
cali yarisCanoga Park, CA · Apr 14, 2010#8 you could take your car to an exhaust shop and ask if they can install another resonator somewhere in the middle of the piping.
This is from your quote. You have a resonator now, directly under the middle of the car. They are suggesting ("middle of the piping"), because they don't know the car has one there already, that you could use a longer one there instead, but it is custom exhaust work that means chopping and welding your midpipe with a new resonator.
I don't think there is room to add an additional resonator, that is where the only straight section is; but I could be wrong.
Really though, in the world of aftermarket exhausts, the Medalion Touring is one of the mellowest out there.
sternzMilford, PA · Apr 14, 2010#9W0W! I guess I'm stuck with my current setup. Not spending anything extra, and since the silencer is not available for the Medalion Touring.
IsLNdbOiThread starterLas Vegas, NV · Apr 14, 2010#10Bummer. I'm seriously considering removing the Medalion Touring and just selling it. I never sold the stock exhaust. It's just been sitting in the garage wrapped up in plastic wrap.
sternzMilford, PA · Apr 14, 2010#11I'm thinking about doing the same! but will see!
Does anyone know of a completely quiet exhaust aside from the stock?
06silveryarisPuerto Rico · Apr 14, 2010#12 Originally Posted by
sternz ↑ I'm thinking about doing the same! but will see!
Does anyone know of a completely quiet exhaust aside from the stock?
I run the same set up as bigorangefront and actually it really is mellow inside and doesn't have that drone effect. Plus its very cheap I paid $23 for the muffler and $15 for the installed.
yarr_isWest LA · Apr 14, 2010#13I thought the medalion touring is one of the quiet exhaust out there... And it's still noisy? If you switch exhaust and worry about the sound then why go aftermarket? Just stay stock...
IsLNdbOiThread starterLas Vegas, NV · Apr 14, 2010#14Well, it was free so I took it. If I had known before they installed it that it would add that much noise inside, I would have taken it and sold it.
I would go back to stock right now, but I don't like that big, bulbous thing attached to the stock exhaust.
Yaris0609Tucson, AZ · Apr 14, 2010#15IsLNdbOiThread starterLas Vegas, NV · Apr 14, 2010#16IsLNdbOiThread starterLas Vegas, NV · Apr 15, 2010#17I guess that big, bulbous part I'm talking about on the stock exhaust is the muffler. Is there any way to hide the stock exhaust's muffler or make it smaller?
I now want to try a setup where you can't see any muffler or exhaust pipe / tip unless you look under the car.
tk-421Dagobah · Apr 15, 2010#18 Originally Posted by
IsLNdbOi ↑ So the only way to silence the Medalion Touring / reduce noise inside the car from it is to add a resonator?
You can also insulate the inside of the cabin better, as fmicle correctly stated. It's a PITA, but well worth it.
Originally Posted by
largeorangefont ↑ I run a turbo style muffler, quieter and much cheaper than the Tanabe. There is just a very slight tone change in the cabin.
Good to se you back around these parts! 👍
IsLNdbOiThread starterLas Vegas, NV · Apr 15, 2010#19I don't have the money to spend on stuff like Dynamat, Fatmat, RAAMat, or Second Skin.
sternzMilford, PA · Apr 15, 2010#20What kind of insulating materials have you guys used to eliminate the noise?
cali yarisCanoga Park, CA · Apr 15, 2010#21^ see post #19?
Also:
There was a DIY on here a long time ago, using a spray can of auto (black) sound deadener in the wheel wells. Made a HUGE difference and a very cheap mod.
sternzMilford, PA · Apr 15, 2010#22 Originally Posted by
cali yaris ↑ ^ see post #19?
Also:
There was a DIY on here a long time ago, using a spray can of auto (black) sound deadener in the wheel wells. Made a HUGE difference and a very cheap mod.
Oh! so that's what that is. Thanks cali yaris for pointing that out! I'll try to find the DYI: w00t:
bobolinkoWas Hawaii - Moved to Everett WA · Apr 16, 2010#23I installed an axleback Magnaflow, and love the sound, but on even medium trips the "drone" got to me. I used to swap stock, and magnaflow often. I then decided to deaden the back section and the hatch, fenderwells, and trunk area where the spare is and the sound is so much reduced that I have not swapped the mufflers anymore! Heck, it was so nice that I have deadened the whole car, and THAT was simply awesome. I even filled the frame boxed areas with foam and fender arches too. Like I say to the wife, I built my own quiet Lexus.... ans I still LOVE the exhaust sound... especially on the WOT between 3-6k rpms . . . 👍
bobolinkoWas Hawaii - Moved to Everett WA · Apr 16, 2010#24 Originally Posted by
sternz ↑ What kind of insulating materials have you guys used to eliminate the noise?
I used Rattle Trap and it came in a roll, and MUCH cheaper than the big-name-Dynamat, etc. I used 2 layers in most places. exp the floorboard area in the back by the spare.
sternzMilford, PA · Apr 17, 2010#25 Originally Posted by
bobolinko ↑ I used Rattle Trap and it came in a roll, and MUCH cheaper than the big-name-Dynamat, etc. I used 2 layers in most places. exp the floorboard area in the back by the spare.
Thanks for your recommendation bobolinko. While searching for Rattle Trap, I came across this product
http://lobucrod.com and seems to be really good and not that expensive. Was this what you suggested? I'm bought, will def.. be getting this and quiet down my car even more all around. All you need to install is "1 can 3M spray glue, box cutter knife or scissors, tape, measure, easy."
Another product that seems real good by their sample video
http://www.quietcoat.com/ fmicleSan Jose, CA, USA · Apr 27, 2010#26 Originally Posted by
bobolinko ↑ I used Rattle Trap and it came in a roll, and MUCH cheaper than the big-name-Dynamat, etc. I used 2 layers in most places. exp the floorboard area in the back by the spare.
Does it make a big difference if you use 2 layers instead of one? Just curious about how much I should buy and if I should go 2 layers right from the start to avoid taking everything out twice...
Could you post some pictures? Did you use foam on the wheel wells? Inside or outside the car?