Yarisworld Archive

Micro Image branded springs

62 posts · 14,036 views · page 1 of 2

cali yarisOriginal postCanoga Park, CA · Apr 1, 2010#1
Hey everyone,

we have an opportunity to produce our own springs.

I would like you to post up your optimum drop and front/rear spring rate, so I can get a feel for what choices to make.

I can't do more than one at this time, so I want to be careful to please as many customers as possible.

your thoughts?

Replies 61

RHDVIPbBLouisville, KY · Apr 1, 2010#2
hmm...where to begin. I would prefer something slightly stiffer than what TRD offers. A 2" drop would be ideal.
cali yarisThread starterCanoga Park, CA · Apr 1, 2010#3
^ that is basically the AOE TigerTecs we have now. Almost a 2" drop
RHDVIPbBLouisville, KY · Apr 1, 2010#4
Originally Posted by cali yaris ↑
^ that is basically the AOE TigerTecs we have now. Almost a 2" drop
but how much stiffer are they?
coffiendOmaha, NE · Apr 1, 2010#5
Real low and real stiff is my vote :)
TEHxFALLEN V1.2Calabasas, CA · Apr 1, 2010#6
Tanabe DF210-like drop but with 99k spring rate.
SilverBackEl Monte, Ca · Apr 1, 2010#7
Make 'em like the Autocross-tested Progress I'm running:

-Front drop: 1.7" --- Rear drop: 1.8"
-Front rate: 110 lbs/in --- Rear rate: 130 lbs/in (not sure how to measure this in K)

It's stiff as hell, corners on a dime, zero rubbing, and zero bottoming-out 👍
AdeJong 03LA, CA · Apr 1, 2010#8
if i were to make my own spring, id do something that no one else has

since you basically sell springs for every kind of drop from 1.2 to 1.9 inches, id probably offer a SUPER LOW spring- like a 2.2-2.5 inch drop all around with an appropriately stiff spring rate.

if i had to choose, it would be like a 7k f 5k r rate.

of course this is just me but when there are so many options out there, why not capture a section of the market that no one else touches? i know a lot of people want to go that low but dont want to buy coilovers

the biggest thing im concerned about when i look at springs is making sure the rear doesnt drop lower than the front.
Betriventedmonton · Apr 1, 2010#9
Originally Posted by TEHxFALLEN V1.2 ↑
Tanabe DF210-like drop but with 99k spring rate.
This except more physically possible
TEHxFALLEN V1.2Calabasas, CA · Apr 1, 2010#10
I like how the DFs sit, just wish they were stiffer.
redn3ckmemphis · Apr 1, 2010#11
somethin good fer the sedans!! id like somethin in the 2.5f/2.25r and say 6kf/4kr? low and stiff please!! and a good price too!

im on df210s now and its too soft and not low enough fer me
coffiendOmaha, NE · Apr 1, 2010#12
2 1/4" to 2.5" would be GREAT. getting tired of not being low enough on the s. Techs and cannot afford coilovers.

Maybe start a poll to keep it organized?

1.5 - 1.75
1.75 - 2
2 - 2.5


.... Thn go from there after the votes come in. Just a thought :)
sqcompBack at home · Apr 1, 2010#13
I'm in the market right now...

I was going to pick up some TRD springs off another owner. I'm not looking for something that will destroy my OEM suspension. I would like something close to the TRD offering, yet wouldn't affect everything else negatively. A little more of a drop is cool if I don't have to modify my fenders.

What's the time frame on this?
BrazdonWColumbia, MD · Apr 1, 2010#14
I would RE-buy springs if they dropped lower than my tein's
2.0 - 2.5 drop all around and i am FOR SURE in lol
LA YarisLos Angeles CA · Apr 1, 2010#15
why not a 3" ?
AdeJong 03LA, CA · Apr 2, 2010#16
it looks like a lot of people who want to go low are already on the stechs and want to go lower.



im totally in for something that drops 2.2-2.5 inches all around.

preferably a little lower in the front so my suspension wont be uneven with cargo or passengers in the rear
LA YarisLos Angeles CA · Apr 2, 2010#17
I like having my 3" dropped plus with the body kit on it seems even lowerd. it just suck to go up drive ways
yarrrnew mexico · Apr 2, 2010#18
Originally Posted by LA Yaris ↑
I like having my 3" dropped plus with the body kit on it seems even lowerd. it just suck to go up drive ways
The pics in your garage don't look like 3" - what are TRD 3" springs anyways.
LA YarisLos Angeles CA · Apr 2, 2010#19
No TRD There Magnum Racing springs.
bronzebullet232California · Apr 2, 2010#20
Originally Posted by AdeJong 03 ↑
it looks like a lot of people who want to go low are already on the stechs and want to go lower.



im totally in for something that drops 2.2-2.5 inches all around.

preferably a little lower in the front so my suspension wont be uneven with cargo or passengers in the rear
I agree. I wish my DF210s were another 1/2 inch to and inch lower.
darthbauerUSA · Apr 2, 2010#21
I want stiffer stock height springs. Screw low, it's all about ground clearance.
BrazdonWColumbia, MD · Apr 2, 2010#22
Low and slow is what its all about ;)
POORSHANE CT · Apr 2, 2010#23
I say lets go for value. Low price 1.5 inch all around. It would be great if newbies could get springs for short money and not have to change their shocks or bottom out in the winter
cruz-gsrAshland Mass · Apr 2, 2010#24
ill go with poorsha's idea
AdeJong 03LA, CA · Apr 2, 2010#25
Originally Posted by POORSHA ↑
I say lets go for value. Low price 1.5 inch all around. It would be great if newbies could get springs for short money and not have to change their shocks or bottom out in the winter
but there are like 3 other springs out there that do that already for cheap.

what would be the point?
POORSHANE CT · Apr 2, 2010#26
When I say short money I am thinking the magic # $99.99 shipped
laer899Sycamore · Apr 2, 2010#27
+1 for extremely affordable and stiff
Mister ZRancho Cucamonga, CA · Apr 2, 2010#28
I would be down for a 2.5 inch drop and 5kg/4kg spring rates
PHXDEMONPhoenix, AZ · Apr 4, 2010#29
Originally Posted by TEHxFALLEN V1.2 ↑
Tanabe DF210-like drop but with 99k spring rate.
This. DF 210s but twice as firm please. Maybe slightly less of a drop.
why?harnett county NC · Apr 4, 2010#30
what's with all the softer in the rear junk? ewww, it should be at least as firm all around, if not stiffer in the rear. maybe 6 or 7k all around?
cali yarisThread starterCanoga Park, CA · Apr 4, 2010#31
^ that's for drivers who can handle oversteer. It's a very important reason why most companies don't do that.

Most customers want to lower their cars for stance and as a secondary effect, handling. Not the other way 'round. That's just a fact of the marketplace.

These are ALL good ideas, everyone. There is no right or wrong to it. Success on a first try out would mean more choices in the future.

So I have to consider all possible segments before choosing one to commit to.

Thank you all 🙇
detroiterMetro Detroit · Apr 4, 2010#32
I do agree that their probably would be a decent amount of customers who would love a spring that is stock height, yet considerably stiffer. It's like what was once said long ago though...you can't please all the people all of the time. A MI brand spring would be really cool though for sure
coffiendOmaha, NE · Apr 6, 2010#33
^ eh, idk about that. Stock height on a Yaris sits like an AMC Eagle.

i would swap out the S. Techs a buy new MI springs if they were lower and real stiff.
detroiterMetro Detroit · Apr 6, 2010#34
But the S techs are already pretty darn low, are they not? And I was just going by what seems that their's alot of people who don't want to be lower due to crummy roads or winters, yet they would like to get rid of the horrendous body roll that exists.
AdeJong 03LA, CA · Apr 6, 2010#35
Originally Posted by detroiter ↑
But the S techs are already pretty darn low, are they not? And I was just going by what seems that their's alot of people who don't want to be lower due to crummy roads or winters, yet they would like to get rid of the horrendous body roll that exists.
not low enough!
detroiterMetro Detroit · Apr 6, 2010#36
I guess you can never get too low huh!
1NZYaris1New Zealand · Apr 6, 2010#37
Originally Posted by cali yaris ↑
^ that's for drivers who can handle oversteer. It's a very important reason why most companies don't do that.

Most customers want to lower their cars for stance and as a secondary effect, handling. Not the other way 'round. That's just a fact of the marketplace.

These are ALL good ideas, everyone. There is no right or wrong to it. Success on a first try out would mean more choices in the future.

So I have to consider all possible segments before choosing one to commit to.

Thank you all 🙇
i Think you should be commited , to a big RUBBER ROOM , 😁
just joking Garm , dude you are to be commended , as this is one real
real hard task , so many options to work out .🍻
🙌
coffiendOmaha, NE · Apr 7, 2010#38
Originally Posted by detroiter ↑
But the S techs are already pretty darn low, are they not? And I was just going by what seems that their's alot of people who don't want to be lower due to crummy roads or winters, yet they would like to get rid of the horrendous body roll that exists.
I get your logic, and it makes enough sense, I just dont see the point of it.

I live in Omaha, NE and we have HORRID roads, the city has had to sub contract several construction crews to handle our pot hole problem.

that being said, I didnt have any problems on my S. Techs last winter. I got stuck one time, but it was because of my own stupidity and would have got stuck on stock height anyways.

I kind of think that a lot of people on YW are overly-cautious about dropping their car, those people already have a ton of options as far as springs go, those of us who want to go lower and cant afford coilovers are kind of screwed, unless they are brave enough to cut a spring (which I am not, but desperately want to at the same time)

so.... LOW LOW LOW AND STIFF PLEASE 👍
eht13. · Apr 7, 2010#39
Originally Posted by detroiter ↑
And I was just going by what seems that their's alot of people who don't want to be lower due to crummy roads or winters, yet they would like to get rid of the horrendous body roll that exists.
It seems like a rear sway bar should work in that case...
coffiendOmaha, NE · Apr 7, 2010#40
^ Also true.
Buddy FanParma, OH · Apr 7, 2010#41
Originally Posted by cali yaris ↑
^ that's for drivers who can handle oversteer. It's a very important reason why most companies don't do that.

Most customers want to lower their cars for stance and as a secondary effect, handling. Not the other way 'round. That's just a fact of the marketplace.

These are ALL good ideas, everyone. There is no right or wrong to it. Success on a first try out would mean more choices in the future.

So I have to consider all possible segments before choosing one to commit to.

Thank you all 🙇
As an old fart, I'm in that boat! Coming from a minivan I think the Yaris handles fine, but I'd love a nice 2" drop without sacrificing ride quality. If that's already out there, someone please let me know.
cali yarisThread starterCanoga Park, CA · Apr 7, 2010#42
I'd love a nice 2" drop without sacrificing ride quality.
Tanabe DF210
Tein S-Tech

Both will do that for you.
33OHDover, Ohio · Apr 7, 2010#43
I think I'm with 75% of the people on here when I say lower and stiff.
minnyarMinneapolis · Apr 7, 2010#44
1.5" all around, stiffer than TRD. I'd buy them.
MosesLos Angeles County, Ca · Apr 7, 2010#45
1.75" drop, 8k front , 6k rear. that way we can keep the oem shocks and still get a stiffer ride.

Moses
Urban Pacifica
detroiterMetro Detroit · Apr 8, 2010#46
6k front, 8k rear... :D
minnyarMinneapolis · Apr 9, 2010#47
Do we have a verdict?
JeemeeCentral Arkansas · Apr 14, 2010#48
Anything lower and stiffer than the DF's and I'll gladly switch them out.

My specific vote would be 3" drop and 5k front and 6k rear spring rates or higher!
BrazdonWColumbia, MD · Apr 14, 2010#49
+1
Mister ZRancho Cucamonga, CA · Apr 15, 2010#50
any update?