I'm more in favor of a 2.5" drop with a 6k front and 5k rear or 3" drop with 7k front and 6k rear. I'd rather have stiffer springs in front for track use and run the 23mm rear sway bar. When is this happening? I've been holding off on buying anything till we have a verdict.
Micro Image branded springs
62 posts · 14,036 views · page 2 of 2
Replies continued
+1Originally Posted by Jeemee ↑Anything lower and stiffer than the DF's and I'll gladly switch them out.
Yeah I want at least a 4 inch drop and the stiffer the better. I really hate how there are no companies that go lower than 2 inches. I would wanna slam mine to the ground if there was a product out there that could do it w.o having to go custom bags and stuff.
4"! They must have some nice roads in SFO!
A lot of you all want an aggressive drop. Remember that unless the spring rate is very high, you're going to start rubbing when you whip it around the turns. Also, wider tires can exacerbate the problem. I would suggest a 1.5" drop with a 5kg (280lb/in) front and 6kg (336lb/in) rear.
we (for the most part) are well aware that they would have to be very stiff to be very low.
and we (again for the most part) are all willing to bear with the non-stock feeling ride as long as it drops us nice and low.
and we (again for the most part) are all willing to bear with the non-stock feeling ride as long as it drops us nice and low.
Why do you guys want such stiff springs in the rear? If you are tracking the car you will want stiffer springs in the front. Also you can just buy a stiffer rear sway bar unless you are looking to have as much oversteer as possible.
If you are tracking the car you will want stiffer springs in the front.no. That will make the car plow straight forward in the turns. Trust me, it's not what you want, I've tried about 5 spring combinations at the track so far, and I have the car balanced really well now.
what are you running for setup and stiffness?
about a 2" drop, upgraded shocks/struts, rear AND front sway bars, and 8k front / 10k rear springs.
So make springs simular to that, 2"-2.5" drop 5-8k front 6-10k rear. If you know that's what works. We really need performance springs, not springs that make our car look cool. Yes you could get coilovers, but you have to worry about corossion in the winter for some of us.
I agree. Wisconsin winters play havoc on cars with all of the salt they dump on the roads. Most of the winter, the roads a literally white the dump so much on them. I would love to see a high performance spring that was engineered to perform, not look purdy. I'm new to the Yaris tuner world so maybe they already have some but i have not seen any.Originally Posted by RacerFreakXXX ↑So make springs similar to that, 2"-2.5" drop 5-8k front 6-10k rear. If you know that's what works. We really need performance springs, not springs that make our car look cool. Yes you could get coil overs, but you have to worry about corrosion in the winter for some of us.