Yarisworld Archive

Serious Autocrossers?

109 posts · 28,844 views · page 3 of 3

Replies continued

Jason@SportsCarDebary, FL · Oct 22, 2009#101
Originally Posted by ozmdd ↑
You just made my point. There is no factory-provided part here. Again, read the quote in blue in the above post. There is no such thing as a factory-installed rear sway bar on a US Yaris. The rule you quote clearly states that a factory-available part can ALSO be installed at the port instead of the actual factory and still be considered "standard."
While you may have good intentions you are incorrect with your interpretation of the rule. 12.4 specifically allows Port Installed options, and treats them exactly the same as assembly line parts. This is regardless of if the part was ever available on the factory assembly line, or if one was ever built at the factory.

There are a number of examples of 12.4 in active competition on the national level, and a great example of this allowance in Appendix F. Aside from the Subi clarification, there is the Shelby Mustang and Camaro SS, both built off site and stock legal. Many of the top Toyota MR2s in ES are hand built cars. The top guys have taken advantage of documentation that shows a hardtop, non-power steering ABS equipped MR2 option. There is zero evidence of one ever being built by the factory, or port, but because it was an option people have built them. The Mazda MX-5 MS-R is Port only built car, never done on the assembly line.

I as an tell you as a past member of the Solo Events Board, and having sat on number protest committees, that the Port is considered the same as the factory for SCCA Solo purposes. However, dealer installed items, even those that could be ordered from the manufacturer are not legal. Toyota, Scion and others have made it difficult for some people to figure out which ones are which, but if you do your homework you will not have an issue.

12 Automotive Definitions:
12.4 STANDARD PART
An item of standard or optional equipment that could have been
ordered with the car, installed on the factory production line, and
delivered through a dealer in the United States. Port-installed options
provided by the factory are considered to be the same as
those installed on the factory production line
. Dealer-installed options
or deletions (except as required by factory directives), no matter
how common or what their origin, are not included in this definition.
This definition does not allow the updating or backdating of parts.

Appendix F:
SUBARU WRX OPTIONS
The following items are port-installed options on the Subaru WRX,
are listed when installed on the vehicle’s window sticker, and
pending evidence to the contrary are considered legal: carbon fiber
trim, turbo boost gauge, titanium shift knob, short throw shifter, rear
diff protector, spoilers, arm rest extension.
lilredrocketDFW, Texas · Oct 22, 2009#102
So to run a rear sway bar on a Yaris in HS does the car need to be ordered with the sway bar or can it be put on at a later time?
Jason@SportsCarDebary, FL · Oct 22, 2009#103
Originally Posted by lilredrocket ↑
So to run a rear sway bar on a Yaris in HS does the car need to be ordered with the sway bar or can it be put on at a later time?
No. You are not required to "order" you car with the options. The stock category allows you to "build" your car. However, keep in mind when adding any options, or doing an option package conversion, it must be a 100% addition/conversion. And most importantly the part must have been available from the factory/port for your model/year car . If Toyota said you can not have a RSB with a moon roof, then you would have to delete the moon roof to add the RSB. Also if they offered it as an option on the 2007, but not the 2008, you would be out of luck if you had an 08'.

Example: In very late 2005 (about a month before the Solo Natls) Lotus decided that an LSD was an option on the 2005 Elise. None had been built that way at the factory or port at the time, but two current owners were able to get the parts to equip their cars in time for the event. In this case the LSD option package also required adding traction control. Had they just installed the LSD, and left off the TC, they would not have been legal.

I am not up to speed on the Yaris, I just signed up here yesterday to do some research after a meeting our office had with Toyota. But looking at the Yaris page and building a car on the web site, it seems pretty easy to determine which options are factory/port options, and which are dealer. All of the non stock legal parts are the ones the say "**installation not included. See your Toyota dealer for installed pricing".
ozmddThread starterDFW, TX · Oct 22, 2009#104
Originally Posted by Jason@SportsCar ↑
No. You are not required to "order" you car with the options. The stock category allows you to "build" your car. However, keep in mind when adding any options, or doing an option package conversion, it must be a 100% addition/conversion. And most importantly the part must have been available from the factory/port for your model/year car . If Toyota said you can not have a RSB with a moon roof, then you would have to delete the moon roof to add the RSB. Also if they offered it as an option on the 2007, but not the 2008, you would be out of luck if you had an 08'.

Example: In very late 2005 (about a month before the Solo Natls) Lotus decided that an LSD was an option on the 2005 Elise. None had been built that way at the factory or port at the time, but two current owners were able to get the parts to equip their cars in time for the event. In this case the LSD option package also required adding traction control. Had they just installed the LSD, and left off the TC, they would not have been legal.

I am not up to speed on the Yaris, I just signed up here yesterday to do some research after a meeting our office had with Toyota. But looking at the Yaris page and building a car on the web site, it seems pretty easy to determine which options are factory/port options, and which are dealer. All of the non stock legal parts are the ones the say "**installation not included. See your Toyota dealer for installed pricing".
Thx for the informed update. We had come to the same conclusion after consulting with the SCCA rules guys, but its nice to have someone who's actually seen the process work give some insight. Welcome to the board!
Yaris-xSyracuse · Oct 22, 2009#105
Just out of curiocity what is you office doing with Toyota?
Jason@SportsCarDebary, FL · Oct 22, 2009#106
Originally Posted by Yaris-x ↑
Just out of curiocity what is you office doing with Toyota?
No comment.
Yaris-xSyracuse · Oct 22, 2009#107
Ok fine...but I did like your article on the Tire Test. It made my happy with my decision on the Star specs. But I do wish you used the RE01R's for bridgestone I have been curious how my tires mount up against them
Jason@SportsCarDebary, FL · Oct 22, 2009#108
Originally Posted by Yaris-x ↑
Ok fine...but I did like your article on the Tire Test. It made my happy with my decision on the Star specs. But I do wish you used the RE01R's for bridgestone I have been curious how my tires mount up against them
We ran the RE01R in our 2008 guide, I liked the feel of it much better than the RE-11, but its not as fast as the current stuff.
echosqwatCalifornia · Nov 16, 2009#109
My old 01 Echo was a ST like prepared car. Had huge 26 mm rear bar, Koni Sports (one o first set of Koni's in NA for these cars) , sport springs, ran 11 ln 15x7 wheels with 205/50/15 Falken Rt615's. Never ran it with SCCA but did run with Porsche club and beat over 50% of the PCA fields in the Echo. Hilarious putting $100K Porsches behind $10K econobox.

Here is vid of the car: http://videos.streetfire.net/video/T...ho-AX_6448.htm

I'm looking to get Yaris soon. Likely will build FSP car.

Here is my current AX car: http://www.youtube.com/watch?v=D3uYEVnVf-E