Yarisworld Archive

hub spacer install help please

17 posts · 6,721 views

ezhacker1Original postSan Francisco · Sep 7, 2009#1
i got the drum off easy, just by my hands, but the hub bolts are giving me huge problems, they're on tight. I made sure to not have my hand-brake engaged per instructions, is there something im missing?

Replies 16

AltitudeColorado · Sep 7, 2009#2
Originally Posted by ezhacker1 ↑
i got the drum off easy, just by my hands, but the hub bolts are giving me huge problems, they're on tight. I made sure to not have my hand-brake engaged per instructions, is there something im missing?
Breaker bar - long socket handle etc. I used a big ass torque wrench.
ezhacker1Thread starterSan Francisco · Sep 7, 2009#3
hmm guess i my ratchet socket wrench wont cut it. Ill try to get a pipe and extend the lever arm.
TamagoOff Grid · Sep 7, 2009#4
Make sure and support that ratchet.

do you have a 10mm allen socket?
ezhacker1Thread starterSan Francisco · Sep 7, 2009#5
Originally Posted by Tamago ↑
Make sure and support that ratchet.

do you have a 10mm allen socket?
lol, i got the hub bolts off with a dumb bell pipe, the ones where you can adjust the weights to your liking. gave me a 2x longer lever arm, but then i went to put on the allen bolts, and guess what? i dont have a 10mm.....
TamagoOff Grid · Sep 8, 2009#6
Originally Posted by ezhacker1 ↑
lol, i got the hub bolts off with a dumb bell pipe, the ones where you can adjust the weights to your liking. gave me a 2x longer lever arm, but then i went to put on the allen bolts, and guess what? i dont have a 10mm.....
did you read the DIY before you started this project?

installing Penguin Garage rear hub spacers!
ezhacker1Thread starterSan Francisco · Sep 8, 2009#7
yup well i thought i had one, o well ill go to my mechanic friends shop to get a 10mm
TamagoOff Grid · Sep 8, 2009#8
that sucks lol. i've had that happen so many times, where you go to the tool box and you're missing what you know you have..
puetato89orlando · Sep 8, 2009#9
Originally Posted by Tamago ↑
that sucks lol. i've had that happen so many times, where you go to the tool box and you're missing what you know you have..
more than youll ever know...😢
AltitudeColorado · Sep 8, 2009#10
Originally Posted by puetato89 ↑
more than youll ever know...😢
+2

Then you go buy what you know you have, only to find it later. I have lots of duplicate tools 😉
TamagoOff Grid · Sep 8, 2009#11
Originally Posted by Altitude ↑
+2

Then you go buy what you know you have, only to find it later. I have lots of duplicate tools 😉
i probably have 9 rolls of electrical tape in different places around the house lol
ezhacker1Thread starterSan Francisco · Sep 8, 2009#12
duct tape and electrical tape solves all life's problems. I keep a roll of e. tape in my car just in case. But yeah, sucks...
AltitudeColorado · Sep 9, 2009#13
When I was growing up I was notorious for taking my dad's tools and not putting them back. It pissed him off so bad that he finally locked all of them up. Of course, being a teenager I found the key. 😛 It didn't take him long to notice someone had been messing with his stuff because I didn't put some things back exactly as I had found them. That put an end to that.

I inherited and learned a lot of things from my dad. Keeping meticulous track of tools and wares was not one of them. Though in the midst of cursing and tearing the house apart to find something, I really wish I had.
cali yarisCanoga Park, CA · Sep 9, 2009#14
i probably have 9 rolls of electrical tape in different places around the house lol
under the bed, maybe? 😲
TamagoOff Grid · Sep 9, 2009#15
Originally Posted by cali yaris ↑
under the bed, maybe? 😲
somehow whenever i start a project i can' find any electrical tape, so i go buy a roll.. they're everywhere!
PHXDEMONPhoenix, AZ · Sep 9, 2009#16
I got them off fine with a 3/8s ratchet 🤷
YarisSedanCalifornia - Bay Area · Sep 9, 2009#17
I used a impact gun to take them off and a torque wrench to put them on. What you could try doing is slipping a pipe on the end of the rachet for more leverage. I did this once to a craftsman one though to take off a lug nut in a emergency and it broke the ratchet lol. So be careful. Though thier hand tools do have lifetime warrenty.