Yarisworld Archive

Wiper blades ....

82 posts · 52,114 views · page 1 of 2

LafiroOriginal postNYC · Jul 23, 2009#1
So I purchased new wiper blades, and finaly learned yet another annoyance of the Yaris, and this is that the passenger side wiper blade is really small, and usually not carried by many companies.

I changed them out the other day, and choose Bosch for the drivers, I think at 18inches, and the passenger at 13inches was Rain-X.

Well, only after 1 month, my passenger wiper blade bounces like mad at the top of the window, and the drivers side wiper blade had about 20+ lines in it and is streaking.

Such cheap wiper blades to be failing so fast.

So I was thinking, maybe I should but some better blades, but I have never bought any before to know which are good or bad.

I was looking at Rain-X Latitude, and Bosch ICON/Evolution blades, and maybe even Michelin wiper blades.

The problem is, that no one has anything smaller then 15inches or so. So I was thinking, the extra two inches shouldnt make much of a difference since the wiper doesnt come that close to the top of the car as it is.

So what is everyones suggestion, because I dont want to mix wipers again, especially if I get one that is just a single bar, compared to those original wipers with tentioners ever few inches.

Thanks.

Replies 81

WeeYariGeorgetown, Ontario, Canada · Jul 23, 2009#2
Go to dealer and just get new inserts for the original blades. Real cheap.
auxmikeLI, New Yawk · Jul 23, 2009#3
I bought the driver's refill (they want like $50 for the blade assy!), the pass blade assy, and the rear blade assy from an online toyota dealer. They were NOT expensive and I know they will fit and look right.
1yr 3 months later and my original wipers that came off the boat on the car are still in perfect condition. Even after a NY winter!👏
toastNappanee, IN · Jul 23, 2009#4
Autozone has them in several brands and they will put them on for you. I'm thinking the installation or sizing may be part of the problem. Regardless you want the correct size or it won't work right. On the 07 you need 26"" for the driver side and 13" for the passenger.
LafiroThread starterNYC · Jul 23, 2009#5
I appreciate the comments, and quick responses.

The problem is, I threw out the old wipers, and now like I said, I have the Bosch for the drivers, and the rain-x for the passenger.

What happens if I purchase new wipers, and instead of 13inches for the passenger, I get 16inches? Will this work? Will they overlap the window?
LafiroThread starterNYC · Jul 23, 2009#6
Originally Posted by toast ↑
Autozone has them in several brands and they will put them on for you. I'm thinking the installation or sizing may be part of the problem. Regardless you want the correct size or it won't work right. On the 07 you need 26"" for the driver side and 13" for the passenger.
26? I thought it was 24? Ok,,, this is confusing.

And why is choosing a larger size an issue?
toastNappanee, IN · Jul 23, 2009#7
Originally Posted by Lafiro ↑
26? I thought it was 24? Ok,,, this is confusing.

And why is choosing a larger size an issue?

Just going by their website and what I bought a few weeks back. In addition to the possibility of overlapping the window you've got a whole bunch of geometry involved with the length of the arms, where and how they attach to the blades and the right pressure on the glass. Since the OP was complaining about lifting and poor cleaning I can't see where changing stock blade length is going to help.

Generaly speaking if wipers are the right size, correctly installed and are in good condition they are going to work. Unless the glass is covered in crap that causes streaks, but that's a whole other can of worms that I will just stay out of.
GeneWPennsylvania · Jul 23, 2009#8
Originally Posted by auxmike ↑
they want like $50 for the blade assy!
No kidding - I tossed mine into the trash. Shoot....

Yeah, buying wiper blades for a Yaris is an experience of sorts.

Gene
GeneWPennsylvania · Jul 23, 2009#9
Originally Posted by Lafiro ↑
Will they overlap the window?
I figured that overhang would skip up onto the body and lift the blade away from the window. If you had any damage to the blade it might scrap the paint.

Gene
auxmikeLI, New Yawk · Jul 23, 2009#10
Here's my personal "stash" from my online Toyota dealer.
The superlong one is the driver's insert, made in USA. The other two are straight from Japan.
These are for a liftback. Those are the correct part #s on the packages.
Hope this helps.
Back into the closet they go for safekeeping....

2 attachments not included in this copy

maryinreddingRedding, CA · Jul 24, 2009#11
I put Silblades on the front but I had my dealer replace the rear. Silblade doesn't make one for the rear. I have had Silblades on most of my cars and they seem to last forever.
b_hickman11Tyler, TX · Jul 24, 2009#12
Got mine at autozone for about $8 each. Think it was 26" on the driver's and 14" on the passenger but it has been a while so can't remember exactly. Why did you put 18" on the driver's side?
LafiroThread starterNYC · Jul 24, 2009#14
I somehow thought the drivers side was 18. Im wrong, the one on there is probably 26inches. I need to flush out the window washer fluid tank.

I put in there some very old and strong window cleanr I got from this guy who cleans coach buses. I believe this is damaging the window/blades.

Even in the rain last night, I noticed it leave a streak, and even in HEAVY rain, the passenger side wiper skips badly on the glass towards the top end.

So I am going to try washing the window with alcohol, windex, and then putting some wd-40 on the wiper blades. This will be all after washing out the tank of the remaining crappy washer fluid. And I will see how they act after that.

And I have a sedan, so I really cant be using LB parts...?
1stToyotaOklahoma · Jul 24, 2009#15
Originally Posted by Lafiro ↑
I somehow thought the drivers side was 18. Im wrong, the one on there is probably 26inches. I need to flush out the window washer fluid tank.

I put in there some very old and strong window cleanr I got from this guy who cleans coach buses. I believe this is damaging the window/blades.

Even in the rain last night, I noticed it leave a streak, and even in HEAVY rain, the passenger side wiper skips badly on the glass towards the top end.

So I am going to try washing the window with alcohol, windex, and then putting some wd-40 on the wiper blades. This will be all after washing out the tank of the remaining crappy washer fluid. And I will see how they act after that.

And I have a sedan, so I really cant be using LB parts...?
I'd save the wd-40 for something else and use the rubbing alcohol on the blades instead.
LafiroThread starterNYC · Jul 24, 2009#16
Ok, thanks, I will try this now.
LafiroThread starterNYC · Jul 24, 2009#17
Flushed out the fluid with only water.

Then I used Windex on the window with a few passes.

Then I used alcohol on cotton balls on each blade.

Turned on the whose, and let the car move the wipers on intermittent,

No more noise, and no more skipping!

Although the drivers side still has those lines, I guess thats perminent damage, most likely causes when I turned on my wipers the other week when it was dry outside. Doesnt help either that I live right infront of a baseball field and my car always gets dirty within 2 hours of being outside. So I will assume the sand caused the damage on the dry blade.
1stToyotaOklahoma · Jul 24, 2009#18
I'm also using Bosch (pass. & driv.) now. Working great so far. Only thing I don't like is that they're not as low profile as I'd like. Might switch back to OEM next time.

"Michelin wiper blades" 😕

I didn't know they were making blades. 🙂
RedRideMiddletown, NY · Jul 24, 2009#19
I have been usion PIAA "super silicone" wipers for years on my Celica (for the summer) and I really love them. They come in the correct sizes for the Yaris. These are the best wipers I have ever used as they are almost like using rain-x.
http://www.piaa.com/WiperBlades/super.html

I assume that other brands/types that would be more suitable for heavy winter use are avalible in the correct sizes also, although, you might have to buy them on line.

As for the rear HB wiper... I guess you just have to get a wiper "refill" that fits. 🙂

BTW, I made the mistake of buying wiper refills from the dealer once and they were ther worst rubber compound imaginable.. ....nothing but chatter!
Yaris HiltonBristol, Tennessee, USA · Jul 24, 2009#20
Petroleum solvents and oils like WD-40 tend to deteriorate rubbers.

(That's why we have K-Y.)
LafiroThread starterNYC · Jul 24, 2009#21
I know, I just read that maybe they have become hard, and since I know what wd-40 does, I thought it would have soften them up.

Its alright for now, the flush of the system, cleaning of the window, AND use of the alcohol on the wiper blades so far fixed all noises.

Now lets see what happens for when it rains next time.
LafiroThread starterNYC · Jul 26, 2009#22
So lots of rain today, hail at times here.

Went to the car, started driving the GF home, about 10-15 wipes later, the stupid skipping started again on the same passenger wiper.

Im sick and tired of this stupid rain-x wiper blade. Never again in my life will I buy this brand. I cleaned the window nicely, and did not use the windex in the tank to clean the window at all, and still the problem came back fast.
l2a3k2a3iOklahoma City, Oklahoma · Jul 26, 2009#23
^I have the rain x wiper blades too and have this problem constantly. Ive had them for over four months and they have skipped and made ridiculous amounts of noise since day one.
IllusionXBrossard, QC · Jul 27, 2009#24
FYI, Walmart's ClearView (or View whatever) frameless wiper blades are available from 12" to 26 or 28". They do fairly well considering they are not OEM wiper blades.
Also, Aquapel and Rain-X treatments are good investments... I find wipers last longer when they are treated with water repellent.
LafiroThread starterNYC · Jul 27, 2009#25
I will try one of those treatments when I can. Need to apply for a job tomorrow, go to the gym/go running, and some toher stuff that I already forgot :( not enough hours in the day!
LafiroThread starterNYC · Jul 27, 2009#26
Originally Posted by l2a3k2a3i ↑
^I have the rain x wiper blades too and have this problem constantly. Ive had them for over four months and they have skipped and made ridiculous amounts of noise since day one.
My question to you is, have you ever treated the window with some type of water repellant like others are saying to do?

Because if you have and this still has issues then I will throw this wiper in the trash and buy a new one, or both.

If you haven't then I will get rain-x or something just because it should be a good investment.

Other then that, I was a victim of hail today (yet again)

Got tons of dents on my roof/hood/trunk. Can't even count thats how many I have probably 200+ just on my roof alone. Looks like rain drops everywhere but instead not wet, just dents.
Bob Dogthe Boondocks, NC · Jul 27, 2009#27
8 bucks buys OEM at the dealers here, 4 bucks when they are on sale...
LafiroThread starterNYC · Jul 27, 2009#28
Just cant believe that in this case, OEM/cheap ones will be a better choice over the expensive ones. Sighs..... I don't have time to mess with that today I don't think.
highwaypassJakarta · Jul 27, 2009#29
OEM brand is NWB
simply cheap and reliable 😁
l2a3k2a3iOklahoma City, Oklahoma · Jul 27, 2009#30
Originally Posted by Lafiro ↑
My question to you is, have you ever treated the window with some type of water repellant like others are saying to do?

Because if you have and this still has issues then I will throw this wiper in the trash and buy a new one, or both.

If you haven't then I will get rain-x or something just because it should be a good investment.

Other then that, I was a victim of hail today (yet again)

Got tons of dents on my roof/hood/trunk. Can't even count thats how many I have probably 200+ just on my roof alone. Looks like rain drops everywhere but instead not wet, just dents.
I have used rain x before and i have a bottle of it but i just haven't had the time to reapply it. Im sure once i do itll fix the problem but like i said... Its finding the time

Btw sucks to hear about your hail damage i had a friend lose his rx-8 to softball size hail a few months ago
MadMaxSan Antonio, Texas! · Jul 27, 2009#31
Originally Posted by IllusionX ↑
FYI, Walmart's ClearView (or View whatever) frameless wiper blades are available from 12" to 26 or 28". They do fairly well considering they are not OEM wiper blades.
I keep hearing about these, but I think it is a "north of the border" thing as I have yet to see a frameless blade less than 16" here in the States...
IllusionXBrossard, QC · Jul 27, 2009#32
Originally Posted by MadMax ↑
I keep hearing about these, but I think it is a "north of the border" thing as I have yet to see a frameless blade less than 16" here in the States...

Frameless wiper blade GB anyone? :) I guess i can go get as many as i can and ship them over :P


BY THE WAY, when repellent is applied, wipers do not work as good, and streaks alot. especially using windshield washer fluids.
IllusionXBrossard, QC · Jul 27, 2009#33
sorry for the confusion.. the name of the walmart wipers are ViewMAX by CAP corporation.
LafiroThread starterNYC · Jul 27, 2009#34
Are they any good? I know they are a good look, but do they work good?
texkidSugar Land, TX · Jul 27, 2009#35
When on the road to San Antonio, the passenger side was skipping horribly. Stopped at an Auto Zone and found that you can get away with 15" Rain-X blades. Not really a noticeable difference from the 14" blades (as far as size) and they don't hit the edge of the windshield.

Just throwing it out there.
MadMaxSan Antonio, Texas! · Jul 27, 2009#36
texkid

You in town now?

Cheers! M2
auxmikeLI, New Yawk · Jul 27, 2009#37
Originally Posted by Lafiro ↑
Other then that, I was a victim of hail today (yet again)

Got tons of dents on my roof/hood/trunk. Can't even count thats how many I have probably 200+ just on my roof alone. Looks like rain drops everywhere but instead not wet, just dents.
Wow, hail that bad in NYC?
Here on LI nothing happend, thank God......😳
LafiroThread starterNYC · Aug 5, 2009#38
I can't find any place to buy frameless wiper blades for my Yaris.

Someone help me please!
The MarshallThe Big Smoke · Aug 6, 2009#39
I got some OEM ones from Part Source, all three (including the rear) was about $50. The rear one is actually really easy to replace, you just have to pry off the plastic at the very bottom of the wiper arm.
IllusionXBrossard, QC · Aug 6, 2009#40
if you guys are willing.. i'd be happy to group buy ViewMAX wipers for you guys...
LafiroThread starterNYC · Aug 6, 2009#41
How much do you think it would be to have it shipped down to the states(NY), and how much are those wipers anyway?

Thanks!!!!!!
Bob Dogthe Boondocks, NC · Aug 6, 2009#43
I bought mine at the dealership parts store for $2 for the pair ( they had to look up the stock numbers) with a $7 castrol oil change discount check, had them on in under 5 minutes, and will toss them when they cease to function properly. It really is that simple.
IllusionXBrossard, QC · Aug 7, 2009#44
Originally Posted by Lafiro ↑
How much do you think it would be to have it shipped down to the states(NY), and how much are those wipers anyway?

Thanks!!!!!!
they are not given, i think it was something like 24$ for the 26" and 15$ for the 13" (sedan size)

i'll post again, i'll go to walmart and check them out..
Bob Dogthe Boondocks, NC · Aug 7, 2009#45
Here are the parts numbers and barcodes from the wiper inserts that I purchased at my local Toyota dealer for my 3dr., perhaps they will be of use to someone on this thread the red on is the large blade the white on the small one:

2 attachments not included in this copy

jeff618Waterford, WI · Feb 12, 2010#46
(Too many wiper blade strings on this site but here we go again...)

OK...here's the ticket: The Toyota Yaris' 14" passenger side replacement windshield wiper is very hard to find in the newer-style beam blades. The 12" rear is also very hard to find because its a special rear blade that fits the special rear arm.

After exhaustive research, I've only found one aftermarket set-up that works: 'Trico NeoForm Beam Blades' on the front (yes, they have a 14") and 'Trico Exact Fit Rear Integral Blade' on the rear. All of the above come with step-by-step, illustrated removal and replacement instructions - easy install. Got the whole set-up online.
jambo101Montreal Canada · Feb 12, 2010#47
I use an 18" for drivers side and a 12" for passenger side,rational for the smaller wiper is less load on the wiper motor with the assumption of increased longevity,i find the $6 ones from Canadian Tire work fine and put on new winter wipers every fall and new summer ones around April. In case some one is wondering what the difference is between a winter and summer wiper

2 attachments not included in this copy

seaneleSoCal · Mar 8, 2010#48
bought my Yaris in May 2007 and my front OEM wipers gone in 2 months..:)
I quickly replaced them with Bosch and also replaced the fluid cleaner with Rain-X.

3 winters after, front wipers still hold strong and never skip since adding the Rain-X

The rear, it still with OEM but the blade broke 2 weeks ago. so, that will be replace soon.

before the yaris,
since late 90s I use Bosch wiper and Rain-X fluid on my other cars too.
especially for the Rain-X, 10 yrs living in snow area gave me no choice but to use their product.
back then,
heavy rain and frozen windshield are no fun at all but Rain-X help ease the headache.
seaneleSoCal · Mar 8, 2010#49
Originally Posted by jambo101 ↑
I use an 18" for drivers side and a 12" for passenger side,rational for the smaller wiper is less load on the wiper motor with the assumption of increased longevity,i find the $6 ones from Canadian Tire work fine and put on new winter wipers every fall and new summer ones around April. In case some one is wondering what the difference is between a winter and summer wiper
some car company do not consider them as for winter use or summer use only.
the Germans already use that thick design as their OEM wipers since early 80s.
jambo101Montreal Canada · Mar 9, 2010#50
Keeping all them pivot points free of ice and dirt is a good idea, last couple of years i've left the winter wipers on all year with no problems..