Replies continued
Chris07LBNew Jersey · Dec 4, 2006#51 Originally Posted by
spkrman ↑ well, teh flow of air is the other way....😎
But either way, the EGR hoseshould be on the OTHER side of the MAF, NOT like the ebay intake, correct?
Is stock not the same exact setup?
Correct.. duh on my part.
You want the EGR tube between the MAF and Filter, acording to what Ive read from the Scion fellas..
Clear enough now? 😎
vodkalushRochester, NY · Dec 4, 2006#52so, if I decide to go ahead and attempt make an intake, would it be wise of me to put/make a egr tube? or will it not really make a difference?
spkrmanThread starter2 · Dec 4, 2006#53 Originally Posted by
Chris07LB ↑ Correct.. duh on my part.
You want the EGR tube between the MAF and Filter, acording to what Ive read from the Scion fellas..
Clear enough now? 😎
are there any aftermarkets that do this?
Chris07LBNew Jersey · Dec 4, 2006#54 Originally Posted by
spkrman ↑ are there any aftermarkets that do this?
"Most" do that I've seen for our engine in the Scion... K&N's intake however does not, and that was talked about.
Dont know why, or what effects it has, Im just going off of everything Ive read, and passing the info along.
Thursday, FedEx will be here with a little something (intake), ill report back with my review. 😎
Chris07LBNew Jersey · Dec 4, 2006#55Alright, to clear things up a bit......
Seems if the EGR tube is between the filter and MAF, the intake manufacture includes an inline one way sealed filter, to splice into the provided tubing going from the intake pipe, to the engine.
Reason for this, is to keep the gases in the EGR from contaminating the air being sucked into the filter, and messing with the MAF Sensor.
So turns out, as long as the EGR is between the filter and MAF, it should have an included inline one way sealed filter.
If the EGR is after the MAF and before the Throttle Body, then even better.
So looks like the green intake you posted up, would be worth a shot afterall, as long as the piping is the correct I.D.! 🙂
EDIT the piping is 3", so going back to that other home made metal piping someone used before, the car didnt idle right, or run right..
slvryarisIndiana · Dec 4, 2006#56I recieved my intake today from Jay at c2auto.com. If anyone is curious it is an AEM 2 in. diameter tubing and the hose goes inbetween the throttle body and the sensor. So it goes throttle body, hose, MAF, and then the filter. Does anyone else have the AEM intkae in their Yaris currently. It is like 15 degrees here and I havent mustard up the courage to put it in. The total length is about 22 in.
ProMotionTuningFredericksburg, VA · Dec 5, 2006#57Guys EGR should not be going to your intake!! EGR is on the Exhaust side of a motor!
johnnyfiveMilwaukee WI · Dec 5, 2006#58the EG in egr is on the exhaust side, but the R and the recirculation part, are on the intake side, so that the exhaust gas is recirculated through motor, warming it, reburning hydrocarbins, or whatever else it does..
Chris07LBNew Jersey · Dec 5, 2006#59 Originally Posted by
ProMotionTuning ↑ Guys EGR should not be going to your intake!! EGR is on the Exhaust side of a motor!
Knowone said its going TO the intake.. it was explained that if its BEFORE the MAF, as in some aftermarket intakes, the tube coming off the head "may kick back some EGR gases, and mess with the MAF sensor..." Hence the reason the intakes that do have the EGR tube between the MAF and filter, include this little one-way filter to splice inline..
spkrmanThread starter2 · Dec 29, 2006#60to update, I redid the intake with 2" rubber hose instead of PVC and no more CEL! Got my boosted top end back! Removing the old one there was a big difference... and it feels just like before now, minus that annoying CEL :)
KSIbuckyFond du Lac, WI · Dec 30, 2006#61How do you connect the MAF to the intake and how do you connet the EGR to the intake?
The hole conversation between all of you guys is kind of confusing
Do you think you could paint that green intake? I think I might buy it but I'm affraid it wont fit but also that color.
Also what about a DIY that would be supper cool!!!!!!!!
P.S. I'm just learning this all know so please understand
spkrmanThread starter2 · Dec 30, 2006#62back to the CEL :(
I'll reset ECU and see whats up...
why does that dam MAF have to be so stubborn!
KSIbucky I'm not sure what your asking, or what your stating?
Chris07LBNew Jersey · Dec 30, 2006#63KSI - keep an eye out in the classifide section later today... I have a metal MAF holder, and EGR holder fab'd up in intake piping all ready to connect someone's home made intake setup to.
Chris07LBNew Jersey · Dec 30, 2006#64KSIbuckyFond du Lac, WI · Dec 31, 2006#65Is there any difference in proformance between a short ram and a regular intake?
And if so why?
vodkalushRochester, NY · Dec 31, 2006#66 Originally Posted by
spkrman ↑ back to the CEL :(
I'll reset ECU and see whats up...
why does that dam MAF have to be so stubborn!
KSIbucky I'm not sure what your asking, or what your stating?
Just got mine all finished half ass'd (new filter+MAF bracket - stock tubing...) and even after resetting (pull batt cable) I'm getting the CEL. So I'm gonna go out and get/make a new ERG "section" for my intake and replace all stock components, I am hoping that this will solve the problem.
KSIbuckyFond du Lac, WI · Jan 2, 2007#67What's the difference between a cold air intake and a short ram intake?
Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
spkrmanThread starter2 · Jan 2, 2007#68 Originally Posted by
vodkalush ↑ Just got mine all finished half ass'd (new filter+MAF bracket - stock tubing...) and even after resetting (pull batt cable) I'm getting the CEL. So I'm gonna go out and get/make a new ERG "section" for my intake and replace all stock components, I am hoping that this will solve the problem.
yea, what a PITA... they couldn't make it easy huh... :)
vodkalushRochester, NY · Jan 2, 2007#69the bastards! 🙂
I got it all put back together, with the ERG tube installed, as well as the MAF so I'll pull the batt cable tomorrow and see if I get the CEL or not. will keep ya posted.
spkrmanThread starter2 · Jan 2, 2007#70starting to see ebay intakes pop up, and they are starting to look appealing :)
when one rolls out in the $50-75 or so range I'm grabbin it up.
Chris07LBNew Jersey · Jan 2, 2007#71 Originally Posted by
vodkalush ↑ Just got mine all finished half ass'd (new filter+MAF bracket - stock tubing...) and even after resetting (pull batt cable) I'm getting the CEL. So I'm gonna go out and get/make a new ERG "section" for my intake and replace all stock components, I am hoping that this will solve the problem.
HERE -
Build Your Own Intake PARTS Make offer.
spkrmanThread starter2 · Jan 2, 2007#72bad link, but with some detective work I figured it out
you'll have a pm in about 2 secs :)
spkrmanThread starter2 · Jan 8, 2007#73as an update, with an ECU reset and some tighter clamping, no CEL thus far :)
vodkalushRochester, NY · Jan 8, 2007#74whats the distance between the beginning of the filter too the clamp on the engine? aka how long is your tubing? and also the distance between the filter and MAF and MAF to engin?!?!
so to try and make sense of the post if you would be so kind as to give me some distances between the following:
Engine - ERG Tube
ERG - MAF
MAF - Filter
🙂
spkrmanThread starter2 · Jan 9, 2007#75 Originally Posted by
vodkalush ↑ whats the distance between the beginning of the filter too the clamp on the engine? aka how long is your tubing? and also the distance between the filter and MAF and MAF to engin?!?!
so to try and make sense of the post if you would be so kind as to give me some distances between the following:
Engine - ERG Tube
ERG - MAF
MAF - Filter
🙂
all tubing is stock, the filter is 3" away from MAF.
and CEL is back on... damit 😆
screw the dam MAF... its gonna make me buy an ebay intake :(
vodkalushRochester, NY · Jan 9, 2007#76ahhh, I thought you where still rocking the PVC intake...
I didnt think that you'd be able to get a good seal from the aftermarket filter to the stock intake tubing...
spkrmanThread starter2 · Jan 9, 2007#77stock tube, pvc, filter.
now its stock tube, rubber hose, filter.
vodkalushRochester, NY · Jan 9, 2007#78ummm, I still think that the issue has somthing to do with tube lenght and the force of the air hitting/passing the MAF... I'll add an extender between my MAF and Filter and see if it makes a diff. if anything I will be pulling colder air in.
Chris07LBNew Jersey · Jan 9, 2007#79how are you mounting your MAF in these home grown intake's?
everything NEEDS to be air tight... duck tape and silicone should not be used to help the seal.
vodkalushRochester, NY · Jan 9, 2007#80no, I'm using an intake "kit" type thing, sort of similar to what u'd put together (if i hadn't already bought the stuff i'm using now i would have just gotten the stuff from you...); I may just need to tighten everything some more..
spkrmanThread starter2 · Jan 10, 2007#81i'll throw on the NST pulley, see what happens, and then go back to the stocker until a cheapy tube pops up on ebay.
BillsteinSo. Ca. · Jan 10, 2007#82Little something I picked up.😁
1 attachment not included in this copy
mcdaddySaudi Arabia · Jan 13, 2007#83patience is the key to make your DIY MAF mounting done!!
I decided to use this bling type filter coz i'm planning for CAI during summer.. I don't have all the fittings so I'll just stick to short ram type for now.
Here is what i did.. No CEL lit up..
Picture not included in this copy
btw, they are available at $10 each for those interested.. hahaha..
Chris07LBNew Jersey · Jan 13, 2007#84You have some sort of support bracket, or is the filter just laying there, bouncing around while driving?
spkrmanThread starter2 · Jan 13, 2007#85 Originally Posted by
mcdaddy ↑ patience is the key to make your DIY MAF mounting done!!
I decided to use this bling type filter coz i'm planning for CAI during summer.. I don't have all the fittings so I'll just stick to short ram type for now.
Here is what i did.. No CEL lit up..
Picture not included in this copy
btw, they are available at $10 each for those interested.. hahaha..
Where can I get one??? PM if need be :)
what the heck is that thing, btw?
Its worth $10, from there I should be able to get a shop to bend up some piping 🤘
spkrmanThread starter2 · Jan 14, 2007#86closer look... seems like regular rubber pipe, heated to have that flat space.
Chris07LBNew Jersey · Jan 14, 2007#87Doubt it. Looks like a MAF holder that you can buy... few places around with our I.D., just have to look.
mcdaddySaudi Arabia · Jan 15, 2007#88Chris07LB – the end of the filter is stack just below the headlight housing.. though they aren’t finish yet, like I said I’m working on CAI & would put a bracket to hold the thing in place.
Spkrman – I’m just kidding.. I’m not selling this thing coz’ I know you can do it yourselves.. guess what? This idea is originally came form your first post .. it’s kinda ghetto!! It’s all made of a Hot Water PVC pipe with the reducers on it.. try again & you’ll see what I mean.. it’s worth to try.. get a vernier caliper to get things done..
* my next project is to look for a stainless steel pipe & replace the whole thing from throttle body to the filter..
vodkalushRochester, NY · Jan 15, 2007#89mcdaddy have you/are you getting the CEL?
I changed my setup and it worked great for the first 40 miles (vrs's before where the CEL would come on after less then 10miles)... then after letting the car cool down (aka parked) I started her up again and I got the CEL.....
mcdaddySaudi Arabia · Jan 16, 2007#90 Originally Posted by
vodkalush ↑ mcdaddy have you/are you getting the CEL?
I changed my setup and it worked great for the first 40 miles (vrs's before where the CEL would come on after less then 10miles)... then after letting the car cool down (aka parked) I started her up again and I got the CEL.....
so far I did'nt get CEL on the dashboard but I'm keeping an eye on it.. I'll let you know when it comes up 😉 ..Anyway, I'm still looking for a stainless steel & will replace my current MAF mounting.
ChinoCharlesOH · Feb 21, 2007#91I bought some 3" exhaust tubing today for just this purpose... my friend has an idea for a design that I think is pure genius, and once the tester piece on my car is done we may even dyno the sucker and sell them for a price that will blow all other available Yaris intakes out of the water. Of course, we will see how clean the welds are and IF we can figure out where to place that sensor. Fun, fun.
spkrmanThread starter2 · Feb 22, 2007#92 Originally Posted by
ChinoCharles ↑ I bought some 3" exhaust tubing today for just this purpose... my friend has an idea for a design that I think is pure genius, and once the tester piece on my car is done we may even dyno the sucker and sell them for a price that will blow all other available Yaris intakes out of the water. Of course, we will see how clean the welds are and IF we can figure out where to place that sensor. Fun, fun.
I'm all over it, just need the piping 👍
pics and such are requried, hit me up on AIM sometime
ChinoCharlesOH · Feb 24, 2007#93I think I have cracked the mysteries of the Yaris MAF!
MWAHAHAHAHA!
Chris07LBNew Jersey · Feb 24, 2007#94 Originally Posted by
ChinoCharles ↑ I think I have cracked the mysteries of the Yaris MAF!
MWAHAHAHAHA!
You want this homie?
Already test fit, our MAF fits without issue, and perfect fit with with the included tapered screws.
2 attachments not included in this copy
yrsdrgnSF,CA · Feb 24, 2007#95Sorry but this might be a lame question. What is the MAF?
Chris07LBNew Jersey · Feb 24, 2007#96Mass Air Flow sensor.. pop your hood, it's the black square piece on top of your stock air box.
ChinoCharlesOH · Feb 25, 2007#97Thats awesome Chris... I just may take it off your hands if you'd allow. Let me refer the picture to my fabrication guru... it appears to be exactly what I'm lacking though. Is that 2" pipe?
Chris07LBNew Jersey · Feb 25, 2007#98ricepowerSaudi Arabia · Feb 26, 2007#99 Originally Posted by
mcdaddy ↑ patience is the key to make your DIY MAF mounting done!!
I decided to use this bling type filter coz i'm planning for CAI during summer.. I don't have all the fittings so I'll just stick to short ram type for now.
Here is what i did.. No CEL lit up..
Picture not included in this copy
btw, they are available at $10 each for those interested.. hahaha..
Bro,
I need one for my Blue Yaris 07..PM me please 👍
du2efs