yah, dont jab the the plastic... there are only 4 tabs one just inside on each corner on the "long sides." you pop the tabs and pull up alittle
Tutorial : Speaker Changing, Headlight Painting, Center Control Colour,Panel Removal
87 posts · 83,229 views · page 2 of 2
Replies continued
Alright, im sick of beating up my car, im going to try to get the entire center panel off. There has to be something I am missing, cuz this is a huge pain in the ass.
Anyone know if there is a way to change the light in the Lock - Unlock button in between the seats? Right now its about the only ugly green light I gotta get rid of.
haha, I was thinking the same thing. After my radio and gauge color change I'll be tearing apart the switches, hopefully its somthing easy like the knob lights; but prob not.Originally Posted by grimezAnyone know if there is a way to change the light in the Lock - Unlock button in between the seats? Right now its about the only ugly green light I gotta get rid of.
If nothing else, i might just get a cap for that spot, and disconnect the switch.
Can someone break down the install on the led to go in the auto shifter for the liftback? I have searched the threads and the repair manual but haven't found any good instructions or a tutorial. I'm stumped. 😕
hey do the 1157 eagle eye tower LED blinkers found on autoillumination work on the hatch?
Vodka, you are the light guru!!!!!!!!!!!!!
grimez which type did u buy a? b? or c? for the a/c controls???
Hi Guys,
After a long hard read.. can someone tell me how many led's i need per knob?
Also will these be ok:
http://cgi.ebay.co.uk/10x-T5-286-Col...QQcmdZViewItem
or
http://cgi.ebay.co.uk/2pc-dashboard-...QQcmdZViewItem
or
http://cgi.ebay.co.uk/2X-RED-T5-LED-...QQcmdZViewItem
Thanks
FH
After a long hard read.. can someone tell me how many led's i need per knob?
Also will these be ok:
http://cgi.ebay.co.uk/10x-T5-286-Col...QQcmdZViewItem
or
http://cgi.ebay.co.uk/2pc-dashboard-...QQcmdZViewItem
or
http://cgi.ebay.co.uk/2X-RED-T5-LED-...QQcmdZViewItem
Thanks
FH
(from earlier in thread)Originally Posted by vodkalush ↑....... so I got mine from*http://autolumination.com/74.htm (from a link in either this thread or a diff one... cant remember and dont care to look 🙂 ) they where "Neo - Wedge Instrument Panel Bulbs" leds.
It will be cheaper and quicker for me to purchase from somewhere in the UK hence the UK (ebay) links.
I know i can get them from autolumination.
I still dont know how many bulbs there are per knob.
Can someone check those links for me and tell me if any of those are any good?
Regards
FH
I know i can get them from autolumination.
I still dont know how many bulbs there are per knob.
Can someone check those links for me and tell me if any of those are any good?
Regards
FH
sorry, didnt even look at your local.
Each knob only has 1 light in it. And you can search ebay for "Neo - Wedge Instrument Panel Bulbs." just be-sure that they are the correct ones if you get from ebay
Each knob only has 1 light in it. And you can search ebay for "Neo - Wedge Instrument Panel Bulbs." just be-sure that they are the correct ones if you get from ebay
i just got mine from autolumination.com and there is 1 led per knob
bulb:

led:

is how the LED/Bulb needs to look for the temp controls
the you listed look like the one needed for the shifter light (gear selection light-up on automatics)

led:

is how the LED/Bulb needs to look for the temp controls
the you listed look like the one needed for the shifter light (gear selection light-up on automatics)
Once again if you go with a bulb it needs to be:
Neo - Wedge Instrument Panel Bulb
and if its a led:
Neo - Wedge Instrument Panel LED Type A/B (C should work aswell)
Neo - Wedge Instrument Panel Bulb
and if its a led:
Neo - Wedge Instrument Panel LED Type A/B (C should work aswell)
does this also apply to the sedan? i mean, if it's similar changing the
LED Center Control Colour,Panel Removal
LED Center Control Colour,Panel Removal
well... this thread already 2 years old.. and no one reply on this thread ever since...
but.. I hope someone read mine and reply this 🤷🤷
Is there any change I can change the LED behind the speedometer?? 😢😢
mine is yellow and I want to change it into blue...
🆘🆘
but.. I hope someone read mine and reply this 🤷🤷
Is there any change I can change the LED behind the speedometer?? 😢😢
mine is yellow and I want to change it into blue...
🆘🆘
up up up.... :o
bump
Yes it can be done in the 09 - I just changed my speedo gauge backlighting from orange to blue using these from eLed :
http://www.eled.com/product.asp?cata...d=epl3015pbc-a
They are slightly bigger than what Vodkalush recommended in his DIY but they worked fine and were easier to work with (slightly). The problem I ran into was the clock on the base 09 LB gets its color from the plastic housing it is in, so changing the LED's would not fix that. What I did was buy some blue 1/8 inch transparent plexiglass and use that to change the clock color. I cut out a window in the orange plastic part around the clock and replaced it with a small piece of blue plexi that I got here:
http://www.estreetplastics.com/Trans...Sheet_s/58.htm
Cost me like $3 plus the LED's and overall was pretty easy - Use search to find the DIY from others that changed their gauge color lighting
http://www.eled.com/product.asp?cata...d=epl3015pbc-a
They are slightly bigger than what Vodkalush recommended in his DIY but they worked fine and were easier to work with (slightly). The problem I ran into was the clock on the base 09 LB gets its color from the plastic housing it is in, so changing the LED's would not fix that. What I did was buy some blue 1/8 inch transparent plexiglass and use that to change the clock color. I cut out a window in the orange plastic part around the clock and replaced it with a small piece of blue plexi that I got here:
http://www.estreetplastics.com/Trans...Sheet_s/58.htm
Cost me like $3 plus the LED's and overall was pretty easy - Use search to find the DIY from others that changed their gauge color lighting
plan on doing this in the neer future
ok so i know i can order the bulbs from this website
http://autolumination.com/74.htm
but exactly which bulbs is it because there a tri-power and some matrix II so if someone could tell me that would be great
I also realize that this thread is really old and im hoping someone will get this still
http://autolumination.com/74.htm
but exactly which bulbs is it because there a tri-power and some matrix II so if someone could tell me that would be great
I also realize that this thread is really old and im hoping someone will get this still
can anyone confirm if Neo - Wedge Instrument Panel LED Type C works?Originally Posted by vodkalush ↑Once again if you go with a bulb it needs to be:
Neo - Wedge Instrument Panel Bulb
and if its a led:
Neo - Wedge Instrument Panel LED Type A/B (C should work aswell)
http://autolumination.com/74.htm
It should look best since its 3LED.
Hey, I bought bulbs from Superbrite but when i try to swap out the bulbs in the stock base, it seems the bulb won't budge out of it's own base. Is there anyway for me to take it out? unfortunately the base i bought is bigger than the stock ones. 5mm. Thank you!!
Nevermind, they finally budge. except now i broke off 2 out of the 3 bulbs the two prongs. So now I have to somehow manage to solder them back. Or just by another set🙁Originally Posted by joeljcruz86 ↑Hey, I bought bulbs from Superbrite but when i try to swap out the bulbs in the stock base, it seems the bulb won't budge out of it's own base. Is there anyway for me to take it out? unfortunately the base i bought is bigger than the stock ones. 5mm. Thank you!!
Thread revival! I'm planning doing this on my little car ;) anyone know where I can get the colours condom?
Ok so I played around with the bulbs on my 08 Yaris, the green in the car is crappy if you ask me... So i installed a High Bright LED, this is just a normal LED that has a 999ohm resister, it involves a bit of soldering(if you want it to be permanent) and ALOT of patience, I will attach the photos, the top switch is obviously the one that i replaced https://www.dropbox.com/s/zoqtlanezy...witches.jpg?m=
If there is anyone out there that would know how to(if possible) change the colour of the radio and its buttons, once again i want them to be WHITE :) Picture lost · www.dropbox.com
If there is anyone out there that would know how to(if possible) change the colour of the radio and its buttons, once again i want them to be WHITE :) Picture lost · www.dropbox.com
I changed a radio to white. It is a pain in the butt to do so, as there are over 40 crazy tiny surface mount LEDs in the radio face.Originally Posted by jasonk1123 ↑Ok so I played around with the bulbs on my 08 Yaris, the green in the car is crappy if you ask me... So i installed a High Bright LED, this is just a normal LED that has a 999ohm resister, it involves a bit of soldering(if you want it to be permanent) and ALOT of patience, I will attach the photos, the top switch is obviously the one that i replaced https://www.dropbox.com/s/zoqtlanezy...witches.jpg?m=
If there is anyone out there that would know how to(if possible) change the colour of the radio and its buttons, once again i want them to be WHITE :) Picture lost · www.dropbox.com

now that looks neat... Good job CTscott, do you know where i can get hold of these ''tiny surface mount LED's"?
Below is a link to the ones I used (1.6mm x 0.8mm):Originally Posted by jasonk1123 ↑now that looks neat... Good job CTscott, do you know where i can get hold of these ''tiny surface mount LED's"?
http://www.mouser.com/Search/Product...-VLMW1300-GS08
Thanks
LOL so i broke the fan switch... If i put 1 on then the air con indicator light works( but no fan) and then 2 3 &4 the air con indicator light switches off and the fan doesnt work... Does anyone have any ideas?
I would have to see what you did on the back side of the knob. You may have created a solder bridge when you added your LED.Originally Posted by jasonk1123 ↑LOL so i broke the fan switch... If i put 1 on then the air con indicator light works( but no fan) and then 2 3 &4 the air con indicator light switches off and the fan doesnt work... Does anyone have any ideas?
Ah I will double check that particular one, the other two i found a creative way to change the bulb with one that they sell here for park lights, fits into the original fitting, will change that when i get home from work in about 3 hours :(