wtf! this is bullshit! we get 12 people together to buy these "prototype" headers from them that they didnt even dyno so we could save a cheap buck on shipping?!
GROUP BUY - Megan Racing 4-1 Header...
485 posts · 86,101 views · page 7 of 10
Replies continued
Not only that,but they found beyers for theyre intial first run headers,which could have problems,man,this is bullshit,we are guinea pigs,and are still basically paying full price,when can I stop bending over,riceboy please handle this or I will.
yea.. seriously, this is pathetic!! WR Headers look very tempting!
I'd say three months minimum until the WR header is done. Maybe longer. I don't know if I can wait that long.
I will dispute the paypal charges before I wait that long! 👎Originally Posted by GalavoxxI'd say three months minimum until the WR header is done. Maybe longer. I don't know if I can wait that long.
Ill wait for RICE to jump in before making any decisions.
I think what he is saying is that that would be the allure... we are saving 30 or 40 bucks on the price of the piece including shipping and we are getting them a couple months before they will be available to the public. If that is the case, we did A-OK.
Listen to Chris on this one and reserve your frustration until Riceboy pops on and lets us know what is up.
Listen to Chris on this one and reserve your frustration until Riceboy pops on and lets us know what is up.
I don't care either way. $190 for a header shipped is a good deal no matter how you cut it. Did we save 40% off the header? No, but it's still not bad considering that shipping on a heavy piece like this would probably be around $30.
Thanks again for the GB. Can't wait to get it in.
Thanks again for the GB. Can't wait to get it in.
Originally Posted by Ran KizamaI don't care either way. $190 for a header shipped is a good deal no matter how you cut it. Did we save 40% off the header? No, but it's still not bad considering that shipping on a heavy piece like this would probably be around $30.
Thanks again for the GB. Can't wait to get it in.
Exactly, that's the way I see it. So I still think we got a decent deal.
Alright guys I'm just getting a chance to read this and wanted to clear up the picture. I just got off the phone with my contact at Megan Racing and was assured that what's being offered by the board sponsor is not happening. The header doesn't have a set MSRP to date and is not available on their website. Chino Charles has already taken advantage of their offer to receive a discount for Dyno Testing.
I've been advised that we are getting the initial shipment and that if there are any problems that we will be getting replacements through their no hassle warranty as promised in previous posts made throughout the thread.
For the time being I hope that everyone is patient and remains calm over the situation. At this time money has been transferred and headers should be shipped by Monday. If you still have any questions or concerns feel free to PM or email me.
I've been advised that we are getting the initial shipment and that if there are any problems that we will be getting replacements through their no hassle warranty as promised in previous posts made throughout the thread.
For the time being I hope that everyone is patient and remains calm over the situation. At this time money has been transferred and headers should be shipped by Monday. If you still have any questions or concerns feel free to PM or email me.
😆 😆 😆 😆 😆Originally Posted by Chris07LB ↑I will dispute the paypal charges before I wait that long! 👎 .
And punish the wrong guy?🙄
Have one on me!🍻
Okay, good. I was really confused when I saw that post. I thought I smelled some 🙄... apparently I was correct, and it wasn't Riceboy. 🙌Originally Posted by riceboy ↑Alright guys I'm just getting a chance to read this and wanted to clear up the picture. I just got off the phone with my contact at Megan Racing and was assured that what's being offered by the board sponsor is not happening. The header doesn't have a set MSRP to date and is not available on their website. Chino Charles has already taken advantage of their offer to receive a discount for Dyno Testing.
I've been advised that we are getting the initial shipment and that if there are any problems that we will be getting replacements through their no hassle warranty as promised in previous posts made throughout the thread.
For the time being I hope that everyone is patient and remains calm over the situation. At this time money has been transferred and headers should be shipped by Monday. If you still have any questions or concerns feel free to PM or email me.
Riceboy, tell Megan to be weary of the holidays if they are dying for those dyno numbers. I can either dyno them in the first half of December or first half of January, but speed shops go to sleep for the holidays.
Originally Posted by tomjasz ↑😆 😆 😆 😆 😆
And punish the wrong guy?🙄
Have one on me!🍻
my reply was to Galvoxx, hence the "quote." Read the second sentence..
Do you know which shipping company they are using?? WRLEO sent my intake this tuesday, UPS showed up at my door today (friday)!! Too bad i wasnt home and my grandma thought the brokerage fee was $465.70, instead of the actual $46.57.. damn... if she only spoke english and/or took a better god damn look at the InfoNotice!!!
Not sure who they'll be using for shipping,.. but I think they'll be declaring a lower value for Canadian buyers so that we get spared on some of the duties and brokerage fees, etc.
I have had time to calm down,I feel much better about the situation again,I am in there till the end.
i still cant wait to get it!!
Hey guys.... This is James the board sponsor in question with the Megan Header... I have spoke to Calvin first thing this morning about this header. The BIGGEST problem was I had the wrong MSRP price. Other then that guys I am not selling the header nor do I have access at this time to sell the header. I have a real shop where we install items and dyno tune cars. We spokre to Calvin about doing his header install for a tech write up and also Dyno Testing. He did mention he already had a car doing the Dyno testing, I just offered another car to get multiple results to show the great numbers his headers should produce.
Calvin nor ricerboy and this group buy is ripping anyone off nor is anyone being mislead. The only misleading thing was my incorrect MSRP price I had posted. That is completely my mistake and appologize for that but please bare in mind, we are NOT selling headers... Just doing testing at this time.
Thanks
James
ProMotionTuning.Com
Calvin nor ricerboy and this group buy is ripping anyone off nor is anyone being mislead. The only misleading thing was my incorrect MSRP price I had posted. That is completely my mistake and appologize for that but please bare in mind, we are NOT selling headers... Just doing testing at this time.
Thanks
James
ProMotionTuning.Com
Thank you for the clarification James.
Thanks for the clarification. I'm sure everyone here appreciates you actually stepping forward and letting us know what's up. 👏Originally Posted by ProMotionTuning ↑...
Thanks
James
ProMotionTuning.Com
Tell those fucking headers to hurry up!!!!! 😛
Who's gonna have them installed first is the question... 😈
James thanks for clarifying everything!
I guess the usual race is on..... who'll be the first to have 'em done?? lol....
I guess the usual race is on..... who'll be the first to have 'em done?? lol....
I'm on the East Coast, so it probably won't be me 😛
me neither.. but hopefully it happens..
If they get here in the next week or two, I promise I'll have my car on the jack before you can say supercalafragalisticexpialoyaris. I want to get it on the dyno before Santa sends the world into a consumerism-fueled nose dive!
Whos doing your install?? We know how long you waited for the window kit to go in.. 😆Originally Posted by ChinoCharles ↑If they get here in the next week or two, I promise I'll have my car on the jack before you can say supercalafragalisticexpialoyaris. I want to get it on the dyno before Santa sends the world into a consumerism-fueled nose dive!
Hahahaha SMART ASS!
Wiring scares me a touch, but a few bolts and a gasket... nawwww.
Wiring scares me a touch, but a few bolts and a gasket... nawwww.
😛 yea, we'll see.... lol.
I'll be looking for the reason next to the Megan Header discription in your sig. 🤣
I'll be looking for the reason next to the Megan Header discription in your sig. 🤣
Thanks dude.
Oh settle down Chucky, its all in fun.
😆
LOL
ahhh hahaha
OMG thats funny,I dont think it will be me either,Georgia is pretty far from shipper.
Any news on the shipping status?
yea, has it been shipped yet??
Southern Cali should get them pretty SOON! 😉 😉 😉 😉
No word yet.. I've sent out the follow up email and will let everyone know what's happening as soon as I get some news.
I noticed everyone is excited about there headers.... but you do realize we bought one header, we aint driving a boxter 4 with two headers, we only have one singular header..... sorry I just had to add this gramatical leason of the day
Post title... GROUP BUY - Megan Racing 4-1 Header... 🙄Originally Posted by Black Yaris ↑I noticed everyone is excited about there headers.... but you do realize we bought one header, we aint driving a boxter 4 with two headers, we only have one singular header..... sorry I just had to add this gramatical leason of the day
California might get them sooner than you'd expect 😁
we say wut sounds guud!! its online! sue us!! haha
I WIN! 1st to get them! soon as i saw the box i tore it open and snapped some shots. sadly it was 9pm so i have to wait till tomorrow to get them put in!
The total Package!
Picture not included in this copy
The Hat!
Picture not included in this copy
The Paper thingy!
Picture not included in this copy
the Headers!
Picture not included in this copy
again, will install tomorrow first thing in the morning...although im supposed to be getting my ps3 tomorrow so we will have to wait and see which one wins out.
The total Package!
Picture not included in this copy
The Hat!
Picture not included in this copy
The Paper thingy!
Picture not included in this copy
the Headers!
Picture not included in this copy
again, will install tomorrow first thing in the morning...although im supposed to be getting my ps3 tomorrow so we will have to wait and see which one wins out.
WHHAAT?!! THEY WERE SHIPPED OUT ALREADY?! OMG!!
just saw the paper. looking at the warranty card. u have to mail that in for the 2 year warranty?!
just saw the paper. looking at the warranty card. u have to mail that in for the 2 year warranty?!
who deleivered it,UPS,or FedEX.
Ooohoooo a hat!
i like the hat... it's like getting two headers for the price of one 😉
...omg...bad pun alert! 😆Originally Posted by eTiMaGo ↑i like the hat... it's like getting two headers for the price of one 😉
Id play the PS3 first.... then tonight, in the garage do your header install! 😎
looks like Megan realy took care of us on this one, lets see if they end up making the rest of the exaust, would be nice to have a full exaust from the same company, knowing it was all engineered to go with eachother