Yarisworld Archive

Accessory Bulb Types, anyone know?

130 posts · 67,159 views · page 3 of 3

Replies continued

Doc ZaiusOttawa, ON, Canada · Nov 30, 2006#101
hey bigsky... any pics? i'd like to see how the red dials look compared to the stock RS amber ones!
johnnyfiveMilwaukee WI · Dec 3, 2006#102
well, finnally got some pics of mine...still crappy cellphone shots though :(

Picture not included in this copy

Picture not included in this copy

look better in person, and all i need now is to do the lights in the guage cluster :)
hasher22Australia Sydney · Dec 4, 2006#103
OOOOOOOOOOO me like johnny
vodkalushRochester, NY · Dec 4, 2006#104
tis niccce.. like my wiiife

I'll try and get the gauge cluster how-to put together this week

(I have my network+ exam this week so I have to start studying for that... sorry but everything gets put at the back of line on a test week)
johnnyfiveMilwaukee WI · Dec 4, 2006#105
actually what i really need is blue hazzard light, and blue airbag notification lights :)

im gunna pull them out tomorrow and check it out :)
vodkalushRochester, NY · Dec 4, 2006#106
those are what i've changed. typing up how-to now 🙂 should have it finished before too long.
vodkalushRochester, NY · Dec 5, 2006#108
(sorry wrong thread :smile ; damn tabs)
ism3tSouthern California · Dec 5, 2006#109
i ordered mine a while back now and still havnt gotten them! what gives?
vodkalushRochester, NY · Dec 5, 2006#110
check your "junk mail" - thats where my email confirmation from them went; also try sending them an email.
brickhardmeatInner City, Dallas · Mar 10, 2007#111
Anyone tell me what they used to pull the dash out with? Butterknife? Special tools? Screwdriver. I changed out my maplights and dome but these bulbs are on the way and I am not sure on the dash removal. I have diagrams but the manual gets a little carried away. Any advice would be appreciated.
eTiMaGoBangkok, Thailand · Mar 11, 2007#112
If you mean the radio and climate control area, you just yank out the two side pieces first, fromt he bottom (the ones with the emergency blinkers button), then the gauges trim, then the radio trim, then the climate control area. Just yank them out, no tools needed but the 10 pinkish sausages attached to your arms 😁
brickhardmeatInner City, Dallas · Mar 11, 2007#113
cool, thanks

I thought I might need a screwdriver or something to get the things to pop out. I'll try when I get my bulbs.
eTiMaGoBangkok, Thailand · Mar 11, 2007#114
Most of this car can actually just be yanked out, like a giant Snap-On model 😁
brickhardmeatInner City, Dallas · Mar 12, 2007#115
Changed the knob bulbs out no problems. That was easy. Guess I was just scared to pull on the stuff but like you said it all popped right out. Feeling of accomplishment. Now I am looking into the shifter light change. Is this just as easy?
Black YarisToledo, OH · Mar 12, 2007#116
Originally Posted by brickhardmeat ↑
Changed the knob bulbs out no problems. That was easy. Guess I was just scared to pull on the stuff but like you said it all popped right out. Feeling of accomplishment. Now I am looking into the shifter light change. Is this just as easy?
I think 90% of us drive manuals
brickhardmeatInner City, Dallas · Mar 12, 2007#117
Well, I don't. I'll look for one of those segregated auto driving guys rooms. 😛
||)) (o) ||\||Southwest PA · Mar 14, 2007#118
Shifter light is easy in the automatic transmision models. Pull off the bottom "lip" underneath the center cosole and you will be able to figure it out from there!
brickhardmeatInner City, Dallas · Mar 14, 2007#119
Thanks I got the procedure from Violin so I'll give it a try this weekend. I'll have to take the arm rest out too. Doesn't sound to complicated. I appreciate the help.
ViolinNew Jersey · Mar 25, 2007#120
I get at least two PMs a week asking how to get at the shifter bulb. Here it is for everyone:

Take the felt pad out of the bottom of the cup holder in your console. Remove the bolt in there (10mm?). Pop out whatever electronics you have by your hand brake and unplug them. Then just lift the entire console up from the rear. There are two clips holding the front of it that just pop out. The shifter bulb is on the left hand side of the shifter.

1 attachment not included in this copy

BokChoiSophia, WV · Mar 25, 2007#121
stupid me i was looking for the bolt in the cupholder connected to the center armrest. after i removed it was i finally able to under stand your instructions lol
brickhardmeatInner City, Dallas · Mar 25, 2007#122
Thank you Violin!🙇

Now all I have to do is figure out how to get passed that damn factory arm rest. 😆
ViolinNew Jersey · Apr 24, 2007#123
The bulb I got for the shifter from autolumination.com burned out already. I really expected more than 5-6 months from an LED.
brickhardmeatInner City, Dallas · Apr 24, 2007#124
that sucks!

makes me reluctant to bother installing
R0ME0Seattle, WA · Apr 27, 2007#125
Did anyone bother to look into the lock button yet on the center console? Gonna take apart the car this weekend and see what we have going on under there!
vodkalushRochester, NY · Apr 27, 2007#126
???
do you mean for power locks?

I've been meaning to take a look at the power lock button... but theres so0o much to do... when I finally do get around to it, i'll prob be taking apart my Fog light switch and change out that bulb as well....
ROCKLAND TOYOTAROCKLAND COUNTY NY · Apr 27, 2007#127
YOU MEAN OUR MANUAL LIFTBACKS HAVE A SHIFT LIGHT????
Doc ZaiusOttawa, ON, Canada · Apr 27, 2007#128
Originally Posted by ROCKLAND TOYOTA ↑
YOU MEAN OUR MANUAL LIFTBACKS HAVE A SHIFT LIGHT????
guy... you're shouting! your caps lock is hurting my ears! 😉
R0ME0Seattle, WA · Apr 29, 2007#129
Ok guys I went ahead and took apart the car this weekend to see if this swap was do-able. The window switch by the ebrake seems to be pretty easy. just cut out the old led and soder in the new one (i drew a red line by the led legs). I measured out the LED came out to be 2.5mm wide and 5mm tall =. Below are pics. Should be pretty easy to find a replacement ED for this.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Now as for the window switch it seems a bit more difficult. I'm thinnking bout using a light bulb condom for that or maybe even just plugging the whole entirely underneath! The LED is very had to get to in terms of desoldering it to get a new one on there plus I wasnt able to seperate the ciruit board with the plastic and I saw no visibe means of how it was attached so I'm a bit lost there! Pics below. Let me know what you guys think. Thought this might be helpful!

Picture not included in this copy

Picture not included in this copy
ViolinNew Jersey · Apr 29, 2007#130
Different color LEDs require different resistors.