turboecho2005Original postOttawa, Ontario · Jul 7, 2009#1Installed LED rear tails and CF hood.
Still need to install the TRD sideskirts and the TRD front bumper and the UK phase 3 rear bumper. But its starting to look decent...
I have to upload a video of the motors starting and reving for you guys sometime soon. Or maybe everyone wants a video of it launching ;) lol
There are still small bugs to work out and some fabrication. The car won't be fully ready until next spring so i am taking this summer as a write off for it.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Replies 22
scottxkillsyouyarisland · Jul 7, 2009#2 Originally Posted by echo_hrs ↑
Wow, that's gonna have some interesting handling characteristics...
A baby Carrera; but what wheels are driving? Front, Rear, or AWD?
Cheers
whatever you feel like running that day ;)
it has a motor in the front too!
turboecho2005Thread starterOttawa, Ontario · Jul 8, 2009#3
But scotty is right you'll be able to select what motor you want to run...
It does hurt not being able to drive it this summer... but then again summer is already half way done.
scotty... should we burn?
SAKUFlorida · Jul 8, 2009#4Im sure it gets hot in there with the rear engine on 😲
not gonna lie though, its pretty sexy
scottxkillsyouyarisland · Jul 8, 2009#5 Originally Posted by
turboecho2005 ↑
But scotty is right you'll be able to select what motor you want to run...
It does hurt not being able to drive it this summer... but then again summer is already half way done.
scotty... should we burn?
this car is still slow 🤮
marcustoronto, canada · Jul 8, 2009#6now you got a bigger trunk space on the hood area!!
turboecho2005Thread starterOttawa, Ontario · Jul 8, 2009#7 Originally Posted by
marcus ↑ now you got a bigger trunk space on the hood area!!
ummm... i have a motor under my hood too 🤣
TinyGiantRochester, NH · Jul 8, 2009#8what is the purpose of two engines?
turboecho2005Thread starterOttawa, Ontario · Jul 8, 2009#9Extra weight so I can drive even slower then before
TamagoOff Grid · Jul 8, 2009#10 Originally Posted by
turboecho2005 ↑ Extra weight so I can drive even slower then before
and turn even slower ;)
or do smokey burnouts, engine 1 in reverse, engine 2 in 1st gear :D
marcustoronto, canada · Jul 8, 2009#11wow twin engine... does it fly too..lolz.
TinyGiantRochester, NH · Jul 8, 2009#12can you run both engines to go foward at the same time? would that give you some serious oomph?
TamagoOff Grid · Jul 8, 2009#13 Originally Posted by
TinyGiant ↑ can you run both engines to go foward at the same time? would that give you some serious oomph?
uhhh
that's the point... 😆
TamagoOff Grid · Jul 8, 2009#14what gauge steel did you use for your new macpherson strut mounts in the rear?
TinyGiantRochester, NH · Jul 8, 2009#15lol i wasnt kidding when i asked what the point was.. lol excuse my ignorance.
how fast does it go? or how quick is it?
TamagoOff Grid · Jul 8, 2009#16 Originally Posted by
TinyGiant ↑ lol i wasnt kidding when i asked what the point was.. lol excuse my ignorance.
how fast does it go? or how quick is it?
check the thread directly below this one in the FI forum ;)
Project Slowtop Stage 2 jonismynameadirondacks, ny · Jul 28, 2009#17did nobody else notice his dirty panties between the seats?
marcustoronto, canada · Jul 28, 2009#18i think the other engine is running the opposite way to slow down the other engine..it maybe too powerfull..lolz
turboecho2005Thread starterOttawa, Ontario · Jul 28, 2009#19 Originally Posted by
jonismyname ↑ did nobody else notice his dirty panties between the seats?
lol what can i say... they're mine! hahaha
TEHxFALLEN V1.2Calabasas, CA · Jul 28, 2009#20Dude, that shit just car-sexed my eyes.
blacksandiegovitzJust chillin' out brah ! · Jul 28, 2009#21WOw , thats some serious fab work man !
CtrlAltDefeatIndianapolis IN · Aug 5, 2009#22straight line should be wildly amazing... curves should be strange... (two slightly different powered engines, and the extra weight on a short wheelbase)
Personally I would have made it a turbo mid engine RWD, and been done with it. I would think the extra weight of the 2nd engine would make the handling suck.... (I'm not saying for sure is does suck, but it just seams like it would) Being mid engine RWD would help the handling by moving the weight into the middle rather then in the front IMO...
turboecho2005Thread starterOttawa, Ontario · Aug 6, 2009#23 Originally Posted by
CtrlAltDefeat ↑ straight line should be wildly amazing... curves should be strange... (two slightly different powered engines, and the extra weight on a short wheelbase)
Personally I would have made it a turbo mid engine RWD, and been done with it. I would think the extra weight of the 2nd engine would make the handling suck.... (I'm not saying for sure is does suck, but it just seams like it would) Being mid engine RWD would help the handling by moving the weight into the middle rather then in the front IMO...
I agree that it should prove to be interesting and i won't know until i bring it to the track. But the cars weight is nearly 50/50 with the rear end being ever slightly more. Remember i can run more power to the rear wheels if i wanted to to make it more RWD. I just have to turn up the boost...
Only time will tell. I've started my maxima project in the mean time :)