Yarisworld Archive

Project Slowtop Stage 2

98 posts · 188,718 views · page 2 of 2

Replies continued

JustAnotherAsianmilpitas / santa rosa · Apr 19, 2009#51
wtf... suscribed!
JustAnotherAsianmilpitas / santa rosa · Apr 19, 2009#52
Originally Posted by turboecho2005 ↑
To answer parmas question about cooling.... That is something that we have to figure out. We discussed about pushing the rear windows in and running vents down to the rad. But I am very picky about body modifications. I would like to keep the body as close to factory as possible. That's why you don't see any vents in the side of the car.

When I get back into town I'll be posting photos of the show. Unfortunately they aren't the best. The iPhones camera is just plain horrible but its better then no photos.
why not draw from the bottom, ducting into an angled radiator?

edit: but the intercooler already does that... eh.
turboecho2005Thread starterOttawa, Ontario · Apr 19, 2009#53
Originally Posted by JustAnotherAsian ↑
why not draw from the bottom, ducting into an angled radiator?

edit: but the intercooler already does that... eh.
the intercooler is an air to water.. but yes the heat exchanger for the intercooler cooling system ducts air in...

Also the car has push buttons start... the can will be able to run on a single motor in the front... or just the back... and obviously both. so it can be 100% FWD or 100% RWD or a variable AWD...

sorry for the bad quality photos... i am sure there will be more in time :)

Good shot of both motors:
Picture not included in this copy


Dash with push buttons start:
Picture not included in this copy


Turbo setup:
Picture not included in this copy


The gas tank for all of that wonder:
Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Apr 21, 2009#54
So you're running a custom fuel tank on the side from the picture. How many L does it hold?
rob323Joyner, Brisbane · Apr 21, 2009#55
Why not just hook both motors up to a large capacity radiator in the front.
It's been done before and then you only have one cooling system to worry about.
CtrlAltDefeatIndianapolis IN · Apr 22, 2009#56
Originally Posted by rob323 ↑
Why not just hook both motors up to a large capacity radiator in the front.
It's been done before and then you only have one cooling system to worry about.
hey not a bad idea...
scottxkillsyouyarisland · Apr 22, 2009#57
Originally Posted by rob323 ↑
Why not just hook both motors up to a large capacity radiator in the front.
It's been done before and then you only have one cooling system to worry about.
only problem with this is if you run the rad hose to the rear motor via inside the car, what happens if a rad hose pops? you're covered in hot coolant ftl. obviously you could run it in a contained area/enclosure of some sort, but i think he wants to keep as much functionality as possible.
rob323Joyner, Brisbane · Apr 22, 2009#58
Have a look at any rear engined, watercooled with radiator up front,custom made race car. You will see that they use solid metal pipes (sometimes under the car, sometimes in the car, depends on what type of racing they do) for that reason.
Russelt3hPirateEpcot · Apr 22, 2009#59
Originally Posted by rob323 ↑
Have a look at any rear engined, watercooled with radiator up front,custom made race car. You will see that they use solid metal pipes (sometimes under the car, sometimes in the car, depends on what type of racing they do) for that reason.
should be pretty easy to do as well.

especially with the fabrication involved already.
scottxkillsyouyarisland · Apr 23, 2009#60
Originally Posted by rob323 ↑
Have a look at any rear engined, watercooled with radiator up front,custom made race car. You will see that they use solid metal pipes (sometimes under the car, sometimes in the car, depends on what type of racing they do) for that reason.

trust me i understand that. if it comes down to it im sure thats what will be done, but i know bruce, he is a friend of mine and im pretty sure he wants to be able to drive the car on the street. i won't speak directly for him, but there has been no mention of this car being a purpose built race car.

p.s. bruce, if you read this, monday night we are starting operation lots of boost, you in?
rob323Joyner, Brisbane · Apr 23, 2009#61
If it works on race cars, there's no reason why it won't work on street cars.
scottxkillsyouyarisland · Apr 24, 2009#62
Originally Posted by rob323 ↑
If it works on race cars, there's no reason why it won't work on street cars.
again not a question of it working or not. im just gunna go out on a limb and say he doesnt want coolant piping running through his interior.
rob323Joyner, Brisbane · Apr 24, 2009#63
Originally Posted by rob323 ↑
(sometimes under the car, sometimes in the car,
🙂 There's a big transmission tunnel which has plenty of room to accommodate a 3" exhaust and two 1" pipes for coolant.
turboecho2005Thread starterOttawa, Ontario · May 4, 2009#64
Hey guys...

Well i really don't what to have coolant pipes running the length of my car. I know its doable and many cars do that like a couple of lotus and i believe mr2s also. Its just a personal preference... I don't want to crash the car and have hot coolant pouring everywhere burning me (not that it couldn't happen if the pipes didn't run through the car).

And i do plan on driving this car not just on the track but also daily drive it on the street.

This car was also made so that i could replace parts with off the shelf parts without waiting for custom parts to come in. I was pretty strict on that... It needs to be serviceable without costing me an arm and a leg to do it.

More pictures will come shortly ;)
TamagoOff Grid · May 4, 2009#65
use hard lines for the coolant. no issues there
turboecho2005Thread starterOttawa, Ontario · May 4, 2009#66
Originally Posted by Tamago ↑
use hard lines for the coolant. no issues there
I know... its just a personal preference... some of us are stubborn in our ways ;)
PHXDEMONPhoenix, AZ · May 4, 2009#67
Thanks for the updated pics 👍 Can't wait to see vids of this beast running.
slothman86Savannah, GA · May 6, 2009#68
All Kinds of sexy!
TheRealEnthMiami, FL · May 6, 2009#69
VIDEOSSSSSSSSSSSSSSs

-with mmt music playing in the background-
toyoJapan I wish · May 27, 2009#70
daaaaamn holly shit that's crazy! waiting for more info, pics and vids!
turboecho2005Thread starterOttawa, Ontario · May 27, 2009#71
Hey guys.. haven't updated anyone in a while... i'll have to get more pics and a video soon. ;) one day when i have some time to do so.

Wish there wasn't a street racing ban on this forum or i'd be willing to share a few stories ;) with possible vids... I thought the internet was about freedom of speech and not opression... Whether it be legal or illegal but thats a whole different thread... oh well...

btw toyo your signature shows a photo by a buddy of mine ken williams ;) i'll have him do a photoshoot with my echo one day...
TheRealEnthMiami, FL · May 27, 2009#72
Dude i always talk about my crazy adventures....... just add a disclaimer like -this story may or may not depict reality- after it... TELL US YOUR STORIES
TrumanpriestSt. Louis · Jul 8, 2009#73
Was not expecting to see a 4A-GTE blacktop install ala' AW11 style in a Yaris. Very nice work. How much time would you say you've invested in this?
turboecho2005Thread starterOttawa, Ontario · Jul 8, 2009#74
Originally Posted by Trumanpriest ↑
Was not expecting to see a 4A-GTE blacktop install ala' AW11 style in a Yaris. Very nice work. How much time would you say you've invested in this?
Not sure how much money but I think enough to feed 1000 kids in a third world country for a year...
TrumanpriestSt. Louis · Jul 8, 2009#75
It's an impressive concept and execution for sure. Be Interested to see what and how you pull on a dyno.
turboecho2005Thread starterOttawa, Ontario · Jul 8, 2009#76
It's has 503 hp right now.... The motors currently have stock internals. When we just had the from motor in we were making 228whp....
Bluevitz-rsOshawa, Ontario, Canada · Aug 20, 2009#77
So any fresh pictures or stories to tell?
cali yarisCanoga Park, CA · Aug 20, 2009#78
503 -- together? how do you measure that, anyway?

Do you dyno them separately?
TamagoOff Grid · Aug 20, 2009#79
Originally Posted by cali yaris ↑
503 -- together? how do you measure that, anyway?

Do you dyno them separately?
AWD dyno ? 😆
JustAnotherAsianmilpitas / santa rosa · Aug 21, 2009#80
Originally Posted by cali yaris ↑
503 -- together? how do you measure that, anyway?

Do you dyno them separately?
Originally Posted by Tamago ↑
AWD dyno ? 😆
i think cali yaris brings up a good point.

either that or we're both really confused for no reason- just confused due to the nature of your build. i mean, it is awd, therefore awd dyno would work? or is it not that simple due to the setup? or am i thinking in a loop? 😆
TamagoOff Grid · Aug 21, 2009#81
Originally Posted by JustAnotherAsian ↑
i think cali yaris brings up a good point.

either that or we're both really confused for no reason- just confused due to the nature of your build. i mean, it is awd, therefore awd dyno would work? or is it not that simple due to the setup? or am i thinking in a loop? 😆
you'd be fine using an awd dyno 😉 but dynoing the engines separately works as well (remember the SCC twin engine'd tiburon of years past)
TheRealEnthMiami, FL · Aug 25, 2009#82
hmm wait a second... does the 1st gen have more space than us?? or can we easily fit a black top in our car?
Abodame99Daytona Beach, FL · Aug 25, 2009#83
what about a functional roof scoop with a radiator for the rear engine
SabretoothSt Cloud FL · Aug 25, 2009#84
There should be plenty of room in the back of the Yaris, more room than the engine bay, plus you dont have to worry about steering or much...biggest issue is making a RWD setup for the rear wheels, but it should be easier than making the car a Front engine, RWD...

Notice all what I can say is Should...I mean I cant say for sure because no one really have invested heavily in doing this in a NEW Yaris...

We can only say this for sure, if you got a bank account with lots of money in it, you can make it happen!
One day I can only dream of having my WRX motor shoved in the back of my Yaris
TamagoOff Grid · Aug 25, 2009#85
Originally Posted by Sabretooth ↑
One day I can only dream of having my WRX motor shoved in the back of my Yaris
better off with something that makes more power and weighs less ;)

2GRFE ?
turboecho2005Thread starterOttawa, Ontario · Apr 4, 2010#86
Project Update...

Been ages since ive been active on the forum. Life is keeping me busy which is a good thing! Keeps me out of trouble.

With another 2 projects on the go its hard for me to focus time and money on the echo but i do have some photos and insight on what to expect from it.

First off id like to thank everyone for the positive comments and the numerous emails i have receieved pretaining to my twin engine setup. I am hoping the next few pics and straighten out some of the questions.

The echo has been running well :) But its currently down right now as we are fixing some issues i have with it. The clutch is the number one issue. It is hard to press even though its hydro. It feels like i am pressing down 75lbs on the leg press with one leg... The solution is to change the pressure plates to make it alittle more managable and streetable while sacrificing a bit of performance. In order to run both clutches the stock clutch cylinder was removed and replaced with a master brake cylinder.

The exhaust is another issue.... Its HUGE and in the middle of the bumper. It wasnt a big deal before with the stock bumper but i now have a jdm rear bumper to install and it has a factory molded lip with an exhaust cut out from the bottom right. So the exhaust will have to be changed.

The charging system has to be modified. Currently i cannot run just the rear motor since the front is only charging the single battery we are using... but thats no big deal.

The shifter assembly has to be replaced... the stock plastic shifter housing just wont take the abuse. A custom piece will be made out of aluminum in its place.

The turbo manifolds, downpipe, brackets and other steel bits have been rusting over the last year. The good news is i picked up a massive compressor, eastwood dual voltage powder coating gun, sand blasting cabinet and a few different colored powders :) but thats last on the list of things to do.

The front engine still needs to have an Air to Water intercooler setup but thats not a priority right now...A rear strut bar has to be fabricated to trianglulate the shocktowers to the chasis.

Aside from the JDM front and rear bumpers, the jdm led tails, trd wing, and carbonfiber hood the outside is basically complete minus the factory or trd sideskirts.

As far as rims and tires go i picked up some goodies :) I got some lightweight 16 inch rota sub zeros and some falken azenia rubber to start off with. Until i burn them down testing and get some good r-compounds.

Now the question is do i even bother to drive it for a couple of months in summer or should i just order some new parts and drop the compression and out some bigger turbos on the car... I am leaning more towards the later option.

Ultimately i want to see 1002whp out of the car. Its not an easy task either...

Here is a list of current performance modifications:
4age 20v engines (currently stock 11.1:1 compression)
6 speed transmissions
1.5way TRD LSDs
Custom Spec stage 3+ clutches
Megasquirt(s)
GT28 Turbos

Currently 503hp

Even though a huge amount of work has been done and the car was running there is still a huge amount of work to be completed...

Enjoy the attached photos :)

6 attachments not included in this copy

turboecho2005Thread starterOttawa, Ontario · Jul 5, 2010#87
Well today the car was at the ICARS (http://www.circuiticar.com) speedway in montreal. It was there for a photo shoot and filming. It will be featured on some video. When i know more details i'll let you guys know. I cant speak a word of french so i wasn't sure the exact details but it was a fairly high budget setup. Helicopter and multipoint camera shots. There were some amazing cars there also including a 600hp supercharged NSX.

Here are some photos. The echo ran great. The pro driver who took it out said the car was unbelievable to drive. We did have a mishap in the afternoon. Ive been running stock struts and springs in the rear... on a hard corner the spring lifted off the strut seat and shredded the tire. I guess its about time i bite the bullet and go buy some coilovers.

Here are some photos. I'll get the video once its done in september.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
cali yarisCanoga Park, CA · Jul 6, 2010#88
looks like a great time out there, but c'mon...MORE PICS (don't make me beg, it's really not pretty)
advocatelocation · Jul 6, 2010#89
Originally Posted by cali yaris ↑
looks like a great time out there, but c'mon...MORE PICS (don't make me beg, it's really not pretty)
this +10000
ParmasML · Oct 27, 2010#92
🙂
Originally Posted by turboecho2005 ↑
http://www.ztele.com/emissions/equipe-pour-rouler/205499759-cathy-gauthier-et-la-porsche-panamera/
8 minute mark you can see the echo :) Wish i could spreak french so i could understand it.

Going to get the echo ready for some winter driving

EDIT....

USE THIS LINK: http://www.ztele.com/webtele/cathy-gauthier-et-la-porsche-panamera-12949/

Its a bit easier then the top one..
Not finding any info on your ride on these links.

Why didn't you shared this link to us? http://www.turbinetech.ca/projet_det...759445779b65b6
Bluevitz-rsOshawa, Ontario, Canada · Oct 27, 2010#93
Sweeeeeet!!

HAHA, I'm glad I was chatting with you the other day.

From the video, they talked about, "why put 2 motors in an Echo?" Answer, "why not".... blah blah blah, then take for a test ride. LOL
turboecho2005Thread starterOttawa, Ontario · Oct 27, 2010#94
Originally Posted by Parmas ↑
🙂

Not finding any info on your ride on these links.

Why didn't you shared this link to us? http://www.turbinetech.ca/projet_det...759445779b65b6

The links I posted is the video that taken in the summer. And it made it on a tv series where they reviewed it.!
turboecho2005Thread starterOttawa, Ontario · Nov 12, 2010#96
Originally Posted by advocate ↑
Le code de pays detecte n'est pas valide pour cette video

The detected pay code is not valid for this video

AKA Video isnt' working =(
http://www.youtube.com/watch?v=vEsZMtswnvk

Youtube link added. sorry for the bad rip. i'll do a better one another day.
cali yarisCanoga Park, CA · Nov 12, 2010#97
NICE, unless you speak French, jump to 2:11 😁
47_MasoN_47Northwest Alabama · Feb 24, 2012#98
Most of the pictures are broke now :(