OMG, Garm.. That's a nice motor.. Good job.. I'm wonder how many hp do you have there.. Congrats. Do you have a Blackberry ? LOL.
built motor swap [pics]
164 posts · 37,523 views · page 3 of 4
Replies continued
I have a Palm Pre. Dunno on the hp yet, we'll see.
how many hp at the wheels ??
Nice and tight there! Congrats
You have too much gauges in there better look at the road with that horsepower :)
You have too much gauges in there better look at the road with that horsepower :)
OMG
I gotta ask are those gauges really that visible in their current location. It just seems to me (or at least with my driving position) looking down to see what the gauges are saying seems counter productive.
+1 Can you really read them at that angle?
i copied garm's setup; However, I chose to use autometer's angled rings (the gauges sit in them). It gives it a slight tilt forward so easier viewing. However, when test fitted without the rings; The guages were still EASILY viewable and did not seem like something that would be hard to look at while driving ( even at WOT ).
here are mine: Completed. Gauges set up WITH rings.
here are mine: Completed. Gauges set up WITH rings.
I've been driving with the gauges there for some time. They are very easy to read, and don't obstruct any view out the windshield in that position. I think the AEM's will be even easier than the Phantom II's I had there before.
This is one of those things everyone had doubts about, but I did it anyway. Sometimes my experiments aren't successful, but this works.
This is one of those things everyone had doubts about, but I did it anyway. Sometimes my experiments aren't successful, but this works.
LOL @ Treyz, good one!
JULY 27 update:
motor is primed, fluids are in. Left to do:
1. water temp sensor
2. new gauges - details
3. weld up the large hole in my custom exhaust 😲 (somehow I ripped a hanger right off the resonator)
motor is primed, fluids are in. Left to do:
1. water temp sensor
2. new gauges - details
3. weld up the large hole in my custom exhaust 😲 (somehow I ripped a hanger right off the resonator)
How did #3 happen?
probably on a speed bump - the metal of the resonator is thin, so it's easy to rip off a hanger from there.
😉 hitting speed bumps at speed will not help you fly,
i thought you knew that already 🤷 😆
i thought you knew that already 🤷 😆
🍻
built motor fired up fine today, woot! -- Art's a frigging genius 🙇
http://www.youtube.com/watch?v=mnKzRHFxeg8
http://www.youtube.com/watch?v=mnKzRHFxeg8
Congrats!
Can you post a vid showing more car, less computer?
Also, got better quality?
Sorry to be picky, but i want a good look at that puppy!
Good job!👍
Can you post a vid showing more car, less computer?
Also, got better quality?
Sorry to be picky, but i want a good look at that puppy!
Good job!👍
I'm going down there on Sunday will shoot more clips then. I'm just excited it runs!
bitchin'!!!
When are we going to Irwindale!?
When are we going to Irwindale!?
this is gonna be awesome
Finally ;) I can't wait to see this beast in action
I wish mine idles like that ! Well done although better quality is expected :)
hey garm, could this be done with a daily driver, such as leaving the AC in and everything?
sure, why not? I plan to drive the car a lot!
well, I know you stripped out the AC, and I'm willing to bet you've changed some parts to increase power/increase noise/decrease comfort... My real dream is to do a sports luxury conversion... turbo built motor + premium interior/ICE (trimming weight as much as possible to keep the sport side of things) so I was wondering if everything you've done will fit with the AC intact
ITS GOOOD! (box punt)Originally Posted by cali yaris ↑
You could keep the A/C with everything I've done except the custom radiator (no room for the a/c condenser with mine). I ran this car for months after it was turbo'd; there's nothing different with a built motor looking at it from the outside.
hmmm but the custom radiator is necessary?
not for a street car, in my opinion.
okay so wheres the street vid!
quoting myself:
not quite ready to street drive yet🙂 as soon as it's broken in. Dyno tuning will be in approx. two weeks.
Im very excite!
Picture not included in this copy
Picture not included in this copy
Wow , those fans really scream!😲Originally Posted by cali yaris ↑
😁 Stop Teaseing us , already , you gotta drive it to break it in 🤷
🙄 It's alright Garm , just winding you up 😆
🙌
🍻
🙄 It's alright Garm , just winding you up 😆
🙌
🍻
That vid brought a tear to my eye. And now I go to bed.
Garm, I'm gonna call you tomorrow.
Garm, I'm gonna call you tomorrow.
Just curious why did you install the AEM boost solenoid on the intake?
BTW pros for the quality video there!
BTW pros for the quality video there!
why not?
I don't think it fits to be in the engine bay, I decided to fit it into the inner dash which is protected more from heat there and tubing is well more organized in dash. But that is just my opinion :)Originally Posted by cali yaris ↑why not?
And I like hearing the solenoid clicking when boost activates and it seems like the bov sound is heard from the sintered muffler. I wsh I took pics of the installation but I was too exited to make it work :)
I would rather keep the vacuum/bost lines in the engine bay, and the runs as short as possible. I don't think the temp of those lines is going to make you any more or less power.
But that is just MY opinion, there are plenty of people on here that know more than me. 🙂
But that is just MY opinion, there are plenty of people on here that know more than me. 🙂
Length is not a problem neither since turbo pressure, wastegate and bov infront of the driver side. I will try to post some pics about theseOriginally Posted by cali yaris ↑I would rather keep the vacuum/bost lines in the engine bay, and the runs as short as possible. I don't think the temp of those lines is going to make you any more or less power.
But that is just MY opinion, there are plenty of people on here that know more than me. 🙂
since turbo pressure, wastegate and bov infront of the driver side.'
not so on my car. 🙂
If you don't bring this beast to IA next year in Nashville you're gonna have a mutiny on your hands !! Trailer it up with your TC & Jill's hatch and the two of ya' can drive cross country. "Driving Miss Daisy" 😆
See ya' next July !
See ya' next July !
Yea, I might make the 4 hour trip to see that 😁
Oh man I cant wait for videos of this thing flyin! Lovin' the red in the engine bay btw, so sexy.
very soon now. Art says I can pick her up and drive it (nicely) for about 500 miles. Then it's ready to get thrashed about on the dyno.
Planning on Sunday morning pick up.
Planning on Sunday morning pick up.
When you pick it up drive that 500 miles that day. I wanna see some numbers!!
Welllllllllllllllllllllllllllllllllll? 😉Originally Posted by cali yaris ↑
Planning on Sunday morning pick up.
^^^ Yeah Garm , any updates 👍Originally Posted by PETERPOOP ↑Welllllllllllllllllllllllllllllllllll? 😉