Yarisworld Archive

Completed. Gauges set up WITH rings.

34 posts · 8,345 views

PETERPOOPOriginal postOahu · Apr 19, 2009#1
After popular demand.... jk.

Rings needed to be filed to curve perfectly to the dash.

*Don't mind the excessively large tach near the shifter. Got it from a friend. Temp set up, but it still works for me.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

LIGHT IT UP!

Video clip of lit up gauges! Click "HQ" below the video player.

http://www.youtube.com/watch?v=OrPYR_1E_b4

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 33

Malaya1221Torrance, Ca · Apr 19, 2009#2
that's what i'm talkin bout!!! proper!!!
Benggolf2Richmond, B.C., Canada · Apr 19, 2009#3
Looking great. Good job! 👍
tristanOrlando, FL · Apr 20, 2009#4
Nice and clean, good job!
dvlnblkdrsorange, ca · Apr 20, 2009#5
beautiful
Kaotic LazagnaCentral Valley, CA · Apr 20, 2009#6
Beautiful.
gmodderTexas · Apr 20, 2009#7
Are you going to do a DIY on the install...What rings did you use and where can i get the same gauges..
yaris-meAnaheim, CA · Apr 20, 2009#8
😆You just made Cali Yaris jealous.
cali yarisCanoga Park, CA · Apr 20, 2009#9
I'm jealous of anyone with a Yaris that RUNS, at the moment... 🙂

I think he got them from Summit Racing. www.egauges.com is also a good source.

He should do a DIY -- after they actually WORK... 😁
LtNoogieWest Hills, CA · Apr 20, 2009#10
These pictures are beautiful. They are a record of what the setup looks like before the oil line comes loose and squirts hot oil all over the back of the steering wheel.😆

J/K Peter. It's a clean looking setup.

Woah... is that the tach down in the storage space in front of the shifter?
PETERPOOPThread starterOahu · Apr 20, 2009#11
I have an electric oil pressure gauge ya jerk! ;)

thanks for comments. For the record, garm was the inspiration and Garm isn't jealous of ANY yaris.

Autometer Cobalt series guages. Rings are called Angled Rings. Got all gauges and rings from summitracing.com. I would have bought them from garm but he didn't have the one I needed in stock. Support microimage!


UPDATED pics of lit up on first post. Hard to make out gauges true colors in pics. So I uploaded a video clip also!!!!!!!

as of now boost/vacuum and wideband gauges are fully functional. Will hook up oil pressure sometime soon!
jinxorSydney, Australia · Apr 20, 2009#12
That is a really good job mate... well done 👍
spookzSydney, Australia · Apr 20, 2009#13
Wow, real neat! Good job!
LtNoogieWest Hills, CA · Apr 20, 2009#14
Originally Posted by PETERPOOP ↑
I have an electric oil pressure gauge ya jerk! ;)
WHAT? We went over and over this. You were insisting on a mechanical oil pressure gauge. I'm glad you got the electrical one. Did you use a sandwich plate to mount the sensor?
SilverBackEl Monte, Ca · Apr 20, 2009#15
Looking good 👍

BTW, do you think the tach would fit in the same spot as the gauges?
PETERPOOPThread starterOahu · Apr 20, 2009#16
Originally Posted by k r a y z e e . j o j o ↑
Looking good 👍

BTW, do you think the tach would fit in the same spot as the gauges?

I can't answer that. My tach is a 5 or 6" tach. Possibly if you got a 3" one it would fit. Garm has a picture of his recent gauge setup in his turbo thread and shows his 4 gauges in the glove compartment and one of them is a bigger gauge. I believe it's a 3"?

Anywho, depends how deep those tachs are that you want to get. You'd need to get measurements of a tach you had in mind and measure the depth of the glove compartment.

Originally Posted by LtNoogie ↑
WHAT? We went over and over this. You were insisting on a mechanical oil pressure gauge. I'm glad you got the electrical one. Did you use a sandwich plate to mount the sensor?
No I did not. I am going to try and fit it in the head in place of the stock sensor. If it doesn't fit, then sandwhich plate it is.
DefStarYarisWaltham, MA · Apr 20, 2009#17
Very good looking. They look even better lit up.
MouseMiami, Fl. · Apr 20, 2009#18
Nice.
lunjiaowPerth, Australia. · Apr 20, 2009#19
nice and blue. love it.
kuyachris84Illinois · Apr 20, 2009#20
love it dude... looks awesome!

Did you paint your center console black cuz im diggin it. What paint did you use?
bradfuciousSeattle, WA · Apr 20, 2009#21
I've thought about doing this once I start modding my dwarf, but I was thinking about doing an recessed cutout with a cover to hide them when the car is parked. This looks great, though!
eTiMaGoBangkok, Thailand · Apr 20, 2009#22
nice and shiny!

*looks at blank front of driver's glove compartment* hmmmmmmmmmm.....
cali yarisCanoga Park, CA · Apr 20, 2009#23
Garm has a picture of his recent gauge setup in his turbo thread and shows his 4 gauges in the glove compartment and one of them is a bigger gauge. I believe it's a 3"?
No, the AEM a/f is the same size as the others.

I am going to try and fit it in the head in place of the stock sensor. If it doesn't fit, then sandwhich plate it is.
I know it will fit there, that's how I did mine. Now go make the pretty lights FUNCTIONAL
PETERPOOPThread starterOahu · Apr 20, 2009#24
Can do boss!
Meteorite_MartyWaterloo, Ontario, Canada · Apr 20, 2009#25
Tidy install. Well done.

Looks like it was meant to be there.

How does opening and closing of the glove compartment take place now, if at all?
PETERPOOPThread starterOahu · Apr 20, 2009#26
It can still function. However, you can't fit anything very big in there. I won't be putting anything in there from now on.
whooppee777Maryland · Apr 21, 2009#27
how did u hook up ur oil pressure gauge i had purchased a sandwhich plate from glowshift but it didnt fit im looking for other alternatives.
PETERPOOPThread starterOahu · Apr 21, 2009#28
haven't hooked it up yet.
whooppee777Maryland · Apr 21, 2009#29
ur breakn my ballz mario
KlintonOKC · Apr 21, 2009#30
looks great man im hooking up some in my car soon! but looks great for sure
dallasCanada · Apr 22, 2009#31
Thats some spectacular workmanship OEM quality fit on the housings🙇
RevssonSoutheast Wisconsin · Apr 22, 2009#32
Nice job Peter!

Garm has a picture of his recent gauge setup in his turbo thread and shows his 4 gauges in the glove compartment and one of them is a bigger gauge. I believe it's a 3"?
Hey Garm, where would I find these pics? I searched turbo, but didn't find them.
TaiyakiHonolulu, HI · Apr 22, 2009#33
Oh my quite the sexy-ness going on there peter~
birdmanUSA · Oct 3, 2009#34
Super clean install. I bow before you.