Yarisworld Archive

TB dyno results

41 posts · 10,559 views

YodaOriginal postFL · Jun 10, 2009#1
look this is what whp i have now with the tb upgrade. Look in the stick above for my previous dyno. about +3 whp but it sure dont feel like it🙁

1 attachment not included in this copy

Replies 40

TamagoOff Grid · Jun 10, 2009#2
3whp is impossible to feel
fujiHonolulu · Jun 10, 2009#3
It's a start! Thank for the work!
marcustoronto, canada · Jun 10, 2009#4
that graph shows a lot more than 3 whp increase..u sure ur reading it right
LorenSafety Harbor, FL · Jun 10, 2009#5
3 hp can be related to temperature, humidity or several other variables.

But, you can't just look at peak HP. Peak HP is good for one thing and one thing only: bragging rights. Who cares? Look at the torque curve before and after. Did you sacrifice any torque to get a smidgen of extra peak HP? That's what's important.
TamagoOff Grid · Jun 10, 2009#6
what mods do you have to make 111whp?
YodaThread starterFL · Jun 10, 2009#7
Originally Posted by Loren ↑
3 hp can be related to temperature, humidity or several other variables.

But, you can't just look at peak HP. Peak HP is good for one thing and one thing only: bragging rights. Who cares? Look at the torque curve before and after. Did you sacrifice any torque to get a smidgen of extra peak HP? That's what's important.
same variables as the list time. and actually its hotter now since its summer than when i did it in the spring. did not lose any tq but gained about 3 also. Peak Hp is what basically all the dynos post here have been using so i though it was relevant.
YodaThread starterFL · Jun 10, 2009#8
Originally Posted by Tamago ↑
what mods do you have to make 111whp?
Yaris Dyno charts

post# 61
mrbondIllinois · Jun 10, 2009#9
Originally Posted by Tamago ↑
what mods do you have to make 111whp?
I, too, would like to know. That's about...13 whp higher than stock, or thereabouts.

Edit: saw your post just after I made mine :P
TamagoOff Grid · Jun 10, 2009#10
Originally Posted by mrbond ↑
I, too, would like to know. That's about...13 whp higher than stock, or thereabouts.

Edit: saw your post just after I made mine :P
13HP at the WHEELS over stock.. which is crank rated hp

edit.. n/m lol
mrbondIllinois · Jun 10, 2009#11
a 13whp gain over stock is not bad for five bolt-ons.
TamagoOff Grid · Jun 10, 2009#12
Originally Posted by mrbond ↑
a 13whp gain over stock is not bad for five bolt-ons.
sounds like a fat dyno to me... plus the guy didn't even bother grabbing a crank signal.. mph dyno graphs blow.
YodaThread starterFL · Jun 10, 2009#13
yea hmm wat next... Custom cat back i guess.Need to get rid of my steelies and get something lighter too. Still doing my research for F/I. Trying to understand the basics of tuning. So much info😳.
cali yarisCanoga Park, CA · Jun 10, 2009#14
way to go -- the TB swap makes power.
TamagoOff Grid · Jun 10, 2009#15
Originally Posted by Yoda ↑
yea hmm wat next... Custom cat back i guess.Need to get rid of my steelies and get something lighter too. Still doing my research for F/I. Trying to understand the basics of tuning. So much info😳.
buy the hks kit and modify it
YodaThread starterFL · Jun 10, 2009#16
Originally Posted by Tamago ↑
sounds like a fat dyno to me... plus the guy didn't even bother grabbing a crank signal.. mph dyno graphs blow.
he did do it i just forgot to put it in rpm. Just match it with the others it is a mirror basically. Every dyno is diff usually with this low whp you can expect a +/-2 variance. it could be fat or the others could just be stingy 🤷
TamagoOff Grid · Jun 10, 2009#17
Originally Posted by Yoda ↑
he did do it i just forgot to put it in rpm. Just match it with the others it is a mirror basically. Every dyno is diff usually with this low whp you can expect a +/-2 variance. it could be fat or the others could just be stingy 🤷
agreed. and this is why you should always return to the same dyno for every new pull :)
YodaThread starterFL · Jun 10, 2009#18
Originally Posted by Tamago ↑
agreed. and this is why you should always return to the same dyno for every new pull :)
i did😁 everything was done the same. and as a plus it is hotter now since its summer.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jun 10, 2009#19
went from 108 hp and 103 tq to 111 hp and 106tq with just the TB upgrade isn't too shabby for just bolt-ons.
marcustoronto, canada · Jun 10, 2009#20
great power comes with great responsive tb..oscillations lolz.
cali yarisCanoga Park, CA · Jun 10, 2009#21
no oscillations if modified and installed correctly. 👍
YodaThread starterFL · Jun 10, 2009#22
Originally Posted by cali yaris ↑
no oscillations if modified and installed correctly. 👍
This^🤘
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jun 10, 2009#23
Originally Posted by Thirty-Nine ↑
Was the intake manifold port matched?
im gonna say no unless there's a DIY somewhere i haven't seen .
YodaThread starterFL · Jun 10, 2009#24
Originally Posted by Thirty-Nine ↑
Was the intake manifold port matched?
no but i was thinking that. Its just plastic is it not?
but anyway look wat i found today
http://www.importfaceoff.net/race_rules.htm#TESTANDTUNE
And here i thought there was nothing for imports in gainesville😁
Nascar races and drag strip is all we got. We get PINKS coming out here pretty offten tho.
largeorangefontSo Cal, OC · Jun 10, 2009#25
Not too bad. Every little bit helps I suppose.
YodaThread starterFL · Jun 10, 2009#26
i will see if i can squeeze 120 out of it🙄
BLAZINBLUEVITZNEW YORK · Jun 10, 2009#27
im looking for that intake porting DIY. i have a spare one lying around i'll use a a test mule.....
YodaThread starterFL · Jun 10, 2009#28
o yes sweet. how much for an extra IM?😳
kngrsllSpartanburg, SC · Jun 10, 2009#29
i dyno'd 87 hp stock... id love to see 111! lol
merryandlovelyUSA · Jun 10, 2009#30
That graph shows a lot more than 3 WHP increase. You sure you you are reading it right
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jun 10, 2009#31
its 3 when you see the last dyno is WITH the new TB installed.....
TamagoOff Grid · Jun 10, 2009#32
Originally Posted by merryandlovely ↑
That graph shows a lot more than 3 WHP increase. You sure you you are reading it right
those curves aren't before and after lol.. you sure YOU're reading it right?
mikenacaratoBrentwood, TN · Jun 10, 2009#33
im stunned that an exhaust does so much on this car

i put down 104 hp 104 tq with the TB, k&n intake, and underdrive pulleys. he has done a header and exhaust and made 7 more hp. sweet :)
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jun 10, 2009#34
his muffler is TRD which in hoping is the jdm one like mine.
2bad4uKingston, Jamaica W.I. · Jun 11, 2009#35
The dyno result for 06 Vitz RS 5spd. only mod are a BroSpeed Bosal axle-back muffler and grounding kit (home made).
Max Power = 101.13 Max Torque 93.44
temp outside was 78F using 91 octane.

1 attachment not included in this copy

ROCKLAND TOYOTAROCKLAND COUNTY NY · Jun 12, 2009#36
BROSPEED is still around? i had their H/E on my del sol and it was a nice setup. BUT that was back in 98' and i haven't heard anything about them recently.
EdgarTRD1.8Hormigueros, Puerto Rico · Jun 13, 2009#37
Which TB you put on it??? I know someone told it but check if the TB port match because you'll have a restriction over there, remember it will suck air from a 1.75" or something like that in the stock port of the 1nz vs if you port to 2.25" like the 1zz or the TB you used. If you don't port will not gain too much.
YarisPRMayaWest, Puerto Rico · Jun 13, 2009#38
Originally Posted by EdgarTRD1.8 ↑
Which TB you put on it??? I know someone told it but check if the TB port match because you'll have a restriction over there, remember it will suck air from a 1.75" or something like that in the stock port of the 1nz vs if you port to 2.25" like the 1zz or the TB you used. If you don't port will not gain too much.
Es el throttle de Corolla o Matrix 1.8 no XRS
EdgarTRD1.8Hormigueros, Puerto Rico · Jun 14, 2009#39
Ok yo estoy haciendo una ara~a en aluminio pa ese throttle despues te envio par de pics... y estaba pensando hacer spacers en plastico y aluminio...
YarisPRMayaWest, Puerto Rico · Jun 15, 2009#40
Originally Posted by EdgarTRD1.8 ↑
Ok yo estoy haciendo una ara~a en aluminio pa ese throttle despues te envio par de pics... y estaba pensando hacer spacers en plastico y aluminio...
Me avisas cm va ese proyecto
2bad4uKingston, Jamaica W.I. · Jun 26, 2009#41
Originally Posted by Thirty-Nine ↑
I had a Brospeed on my 98 Civic, too. I bought it in 2004, I think. Well made, inexpensive, too.
I paid about US$112 installed, great sound will post youtube asap, just trying to do the tb swap this weekend hoping to pickup a 1zz tb at any of the local used parts shops if not I'll get it from Garm, set up with the swap already.