Yarisworld Archive

GT17 too small?

95 posts · 18,780 views · page 1 of 2

JeemeeOriginal postCentral Arkansas · Jun 6, 2009#1
Just curious. If so, what size? GT20, 25, 28?

Plan to start at 7psi and maybe graduate to 8.
No engine management, for now
No intercooler right away, may do top mount later
TC or 1ZZ injectors

Replies 94

CASTREXCosta Rica · Jun 6, 2009#2
Get the GT2554R

That is the smallest garrette BB turbo.

You can get it new from $800-$900

You can get an even smaller Journal B turbo like a GT20 but eventually when you want to upgrade your set up, those units just won't put out any top end power...

You can get easily over 200 whp with the GT2554 and still have a pretty fast spool up time.
JeemeeThread starterCentral Arkansas · Jun 6, 2009#3
Thanks! Any recommendations on a place to buy?
CASTREXCosta Rica · Jun 6, 2009#4
Ask Garm.


I recently bought the GT25 he took out of his car...
JeemeeThread starterCentral Arkansas · Jun 6, 2009#5
Will do. Thanks
cali yarisCanoga Park, CA · Jun 6, 2009#6
That's a good choice. 7 psi, no I/C and no management might give you 140-150 whp, I think.
JeemeeThread starterCentral Arkansas · Jun 6, 2009#7
That would be plenty of power. Now the question would be, how safe is that set up?

If I knew the 1nz-fe volumetric efficiency and the air flow at a given rpm, then I could read the compressor maps and decide. Anyone know?

I've been looking through some honda and scion forum classifieds, I see alot of t3/t4s for sale. I'd really prefer no lag or very little obviously. A friend of mine had a t3/t4 on his B16 but I can't remember if he had lag or not. Plus vtec made it hard to tell anyway I'm sure. Hope to come across a GT25 soon.
JeemeeThread starterCentral Arkansas · Jun 6, 2009#8
If I can get away without detonation and being lean, which I think is feasible, I think I'll be fine. I'm here to gain knowledge though so I'm open to suggestions. I may go with a TMIC, depending if I can find one designed to my likings.
cali yarisCanoga Park, CA · Jun 7, 2009#9
No intercooler and no engine management? Are you senile?
I ran my turbo without management for nearly a year. Tamago ran his with no issues either. It is possible.

The T3/T4 will create way too much lag at low boost; it's just not the right choice for your intended application.
cali yarisCanoga Park, CA · Jun 7, 2009#10
Real world experience is what makes it good or bad. I am pointing out two cases where it worked fine. Do you have a real-world case where a Yaris (or other 1.5L) failed from running a low-boost application without management?

Your sarcasm does not contribute to the discussion -- your real experiences do!
TamagoOff Grid · Jun 7, 2009#11
Originally Posted by The Spectacle ↑
Real world experience with a boosted Yaris? NO.

Garm, I respect you on this site for your contributions so I won't be disrespectful to you like I would, say Poopy Peter or somebody else as stupid. But, on this subject I think you and anyone who thinks like you are just flat wrong. Spreading the message that adding forced induction without proper engine management to ANY car is ridiculous within itself, not to mention the fact that you're doing it on a car with a 10.5CR (or whatever it is) that was designed for fuel economy. I mean, at the VERY LEAST I would recommend at least doing a rising rate FMU and a map/maf clamp but even that is still a recipe for disaster in the long term. Just because you got away with it for "almost a year" doesn't make it safe. There are kids on this site that don't know any better and if they read a post that says "you can boost your Yaris to 7psi without any engine management" they'll go do it, blow their motors and come back and blame you instead of their own retardness. Boosting a N/A motor is hard enough with the proper components...but slapping on a turbo with no supporting mods? What about the effects on ignition timing? A/F ratio? Fuel pressure? EGT's? It goes on and on...

I'm all for doing stupid shit, but I draw the line when I see people (especially someone so key on this site like you) recommending to other people to do stupid shit.
can't do a rising rate


this is a returnless fuel system buddy ;)

buy a wideband, put in some larger injectors, and go to town. the car will take care of timing at 7psi.
TamagoOff Grid · Jun 7, 2009#12
jeemee, want to buy my charge pipe/intercooler? you'll need a shorter battery however.
Nexus1155Dorchester · Jun 7, 2009#13
It goes on and on...
and on and onnnn

Strangers, waiting
Up and down the boulevard!!!!
Their shadows
Searching in the nighttttt
JeemeeThread starterCentral Arkansas · Jun 7, 2009#14
Originally Posted by The Spectacle ↑
Real world experience with a boosted Yaris? NO.

Garm, I respect you on this site for your contributions so I won't be disrespectful to you like I would, say Poopy Peter or somebody else as stupid. But, on this subject I think you and anyone who thinks like you are just flat wrong. Spreading the message that adding forced induction without proper engine management to ANY car is ridiculous within itself, not to mention the fact that you're doing it on a car with a 10.5CR (or whatever it is) that was designed for fuel economy. I mean, at the VERY LEAST I would recommend at least doing a rising rate FMU and a map/maf clamp but even that is still a recipe for disaster in the long term. Just because you got away with it for "almost a year" doesn't make it safe. There are kids on this site that don't know any better and if they read a post that says "you can boost your Yaris to 7psi without any engine management" they'll go do it, blow their motors and come back and blame you instead of their own retardness. Boosting a N/A motor is hard enough with the proper components...but slapping on a turbo with no supporting mods? What about the effects on ignition timing? A/F ratio? Fuel pressure? EGT's? It goes on and on...

I'm all for doing stupid shit, but I draw the line when I see people (especially someone so key on this site like you) recommending to other people to do stupid shit.
I understand where you're coming from on this. I think you've made your point so now those "kids" will read it and maybe decide against it. I'll have supporting mods. The ecu will take care of timing, enough anyway. The TC injectors will take care of the A/F ratio, a wide band for observation. Our stock fuel system is capable of handling 7 psi. I don't plan on going over that at this stage.
JeemeeThread starterCentral Arkansas · Jun 7, 2009#15
Tamago, I'd like to see some pictures. Definitely interested.
turboecho2005Ottawa, Ontario · Jun 7, 2009#16
Originally Posted by The Spectacle ↑
Real world experience with a boosted Yaris? NO.

Garm, I respect you on this site for your contributions so I won't be disrespectful to you like I would, say Poopy Peter or somebody else as stupid. But, on this subject I think you and anyone who thinks like you are just flat wrong. Spreading the message that adding forced induction without proper engine management to ANY car is ridiculous within itself, not to mention the fact that you're doing it on a car with a 10.5CR (or whatever it is) that was designed for fuel economy. I mean, at the VERY LEAST I would recommend at least doing a rising rate FMU and a map/maf clamp but even that is still a recipe for disaster in the long term. Just because you got away with it for "almost a year" doesn't make it safe. There are kids on this site that don't know any better and if they read a post that says "you can boost your Yaris to 7psi without any engine management" they'll go do it, blow their motors and come back and blame you instead of their own retardness. Boosting a N/A motor is hard enough with the proper components...but slapping on a turbo with no supporting mods? What about the effects on ignition timing? A/F ratio? Fuel pressure? EGT's? It goes on and on...

I'm all for doing stupid shit, but I draw the line when I see people (especially someone so key on this site like you) recommending to other people to do stupid shit.
ANY engine can take 5psi of boost with a properly sized turbo. Even motors with high compression above 11:1 can be boosted to 5psi and with tunning you can push them to 8 or 9psi and with meth injection you can run 12-14psi. High compression and boost gives you the best of both worlds but hard to tune for high boost.

You don't need a built motor and tones of mods to put a turbo on your car. Id look forward to blowing up my motor so i could just rebuilt it stronger and go again.

I'd say go for it and turbo the stock motor with 7psi. Don't let The Spectacle discourage anyone.
The SpectacleTampa, FL · Jun 7, 2009#17
My objections aren't about boosting a stock motor, its about boosting any motor without the proper supporting modifications of which the primary, and most crucial component is engine management.
The SpectacleTampa, FL · Jun 7, 2009#18
Originally Posted by Tamago ↑
the car will take care of timing at 7psi.
Wait...what?


What?


There's so much wrong here I don't even know where to begin.
TamagoOff Grid · Jun 7, 2009#19
Originally Posted by The Spectacle ↑
My objections aren't about boosting a stock motor, its about boosting any motor without the proper supporting modifications of which the primary, and most crucial component is engine management.
at 7 psi the only thing you should be concerned with is a cool IAT and enough fuel, both of which can be achieved without throwing money into complicated engine management
TamagoOff Grid · Jun 7, 2009#20
Originally Posted by The Spectacle ↑
Wait...what?


What?


There's so much wrong here I don't even know where to begin.
YOU REALLY REALLY should just shut the F up at this point.

you don't understand in the LEAST how VVTi and knock sensors work, do you?
PETERPOOPOahu · Jun 7, 2009#21
spectacle FTL
MorganPCB, FL · Jun 7, 2009#22
*subscribed* 😁
TamagoOff Grid · Jun 7, 2009#23
Originally Posted by Morgan ↑
*subscribed* 😁
tell us, oh wise one!

before the Spectacle makes a Himself out of himself any further 😁
Brad DWinnipeg · Jun 7, 2009#24
keep in mind the samller the turbo the more low end power.. the more low end power the more TQ.. more TQ = more cylinder pressure. We have had a few stock B18 hondas at 370wtq and any thing more than that and the cylinder splits. So you can still have the same HP with a bigger turbo but with less TQ..


I would go with a GT25.. or a GT28 if you ever want higher power goals.
TamagoOff Grid · Jun 7, 2009#25
Originally Posted by Brad D ↑
keep in mind the samller the turbo the more low end power.. the more low end power the more TQ.. more TQ = more cylinder pressure. We have had a few stock B18 hondas at 370wtq and any thing more than that and the cylinder splits. So you can still have the same HP with a bigger turbo but with less TQ..


I would go with a GT25.. or a GT28 if you ever want higher power goals.
also keep in mind, smaller turbo = hotter charge air :)

my VF39 came into full boost before 3800rpm and made around 5lbs at 3000

perfect IMO
MorganPCB, FL · Jun 7, 2009#26
you'd think with several threads asking about a small turbo/no ic/no fuel mang there would be tons of FI yaris' - gl to you when you get yours turbo'd 🙂
TamagoOff Grid · Jun 7, 2009#27
Originally Posted by Morgan ↑
you'd think with several threads asking about a small turbo/no ic/no fuel mang there would be tons of FI yaris' - gl to you when you get yours turbo'd 🙂
this makes thread # 33 right?
JeemeeThread starterCentral Arkansas · Jun 7, 2009#28
Morgan, sorry I can't recall but are you using the blitz fuel controller?
MorganPCB, FL · Jun 7, 2009#29
Originally Posted by Jeemee ↑
Morgan, sorry I can't recall but are you using the blitz fuel controller?
yeah, just whatever came in the xa kit, aka "magic black box"

really I'm thinking it just extends the injector pulse, but I have no idea what its actually doing
Brad DWinnipeg · Jun 7, 2009#30
I dont think i would ever do a turbo setup with no piggy back ( even though I hate them) these days you can get a AEM FIC for only a few hundred.. and if it saves your motor its well worth it IMO.
JeemeeThread starterCentral Arkansas · Jun 7, 2009#31
Sorry about the repost 🤷 Has anyone accomplished this yet, besides garm? I won't even start on it for a while I'm just planning ahead.
AltitudeColorado · Jun 7, 2009#32
...breaks out the popcorn...
JeemeeThread starterCentral Arkansas · Jun 7, 2009#33
Originally Posted by Altitude ↑
...breaks out the popcorn...
Well in that case, I'm sure I should be fine with 10psi on stock fuel management, right?...kidding of course 🍻
JeemeeThread starterCentral Arkansas · Jun 7, 2009#34
Originally Posted by Jeemee ↑
Sorry about the repost 🤷 Has anyone accomplished this yet, besides garm? I won't even start on it for a while I'm just planning ahead.
Yeah I guess I could have looked at the people with the custom turbo on the boosted list. Oh well, in my defense, I was only asking if the GT17 was too small.
MorganPCB, FL · Jun 7, 2009#35
I'd like to see a small turbo, simple set up done on a yaris and I honestly hope it works out for you which ever turbo you choose but I just want to see it done not just discussed. Seems to be a general consensus that it could be done but then again in theory the xa/xb transmission should work too 🙄- it sucks to be the first one to jump in and get it done, but at least you'd know exactly how/why it did or didnt work
TamagoOff Grid · Jun 7, 2009#36
it is :D
TamagoOff Grid · Jun 7, 2009#37
Originally Posted by Morgan ↑
I'd like to see a small turbo, simple set up done on a yaris and I honestly hope it works out for you which ever turbo you choose but I just want to see it done not just discussed. Seems to be a general consensus that it could be done but then again in theory the xa/xb transmission should work too 🙄- it sucks to be the first one to jump in and get it done, but at least you'd know exactly how/why it did or didnt work
sorry friend :(
The SpectacleTampa, FL · Jun 7, 2009#38
Originally Posted by Tamago ↑
YOU REALLY REALLY should just shut the F up at this point.

you don't understand in the LEAST how VVTi and knock sensors work, do you?
lol now this is getting fun...

So I bring up a valid point about timing and you're answer is to leave it to the knock sensor?? Seriously? So since I have no idea what I'm talking about, maybe you can explain what the ECU does when it detects knock. Pull timing right? Right...but how much? Until it stops knocking? Do you know how, pun intended, retarded that sounds? The knock sensor is designed to pull timing based on IAT's, variances in octane, and a few other factors...not to make up for not having the proper values in the timing map to reference in relation to positive pressure.

I'm going to pretend that you didn't mention VVTi seeing how it has no relevance here. But maybe you can explain that one too.
MorganPCB, FL · Jun 7, 2009#39
Originally Posted by Tamago ↑
sorry friend :(
its ok, but now I know that an xa/xb transmission will fit but not work in a yaris 🙂
TamagoOff Grid · Jun 7, 2009#40
Originally Posted by The Spectacle ↑
lol now this is getting fun...

So I bring up a valid point about timing and you're answer is to leave it to the knock sensor?? Seriously? So since I have no idea what I'm talking about, maybe you can explain what the ECU does when it detects knock. Pull timing right? Right...but how much? Until it stops knocking? Do you know how, pun intended, retarded that sounds? The knock sensor is designed to pull timing based on IAT's, variances in octane, and a few other factors...not to make up for not having the proper values in the timing map to reference in relation to positive pressure.

I'm going to pretend that you didn't mention VVTi seeing how it has no relevance here. But maybe you can explain that one too.
😆 you have no experience with forced induction in the 1nzfe.

i do

i know what works safely.

🤷

you're going on my ignore list, not worth my time answering your retarded arguments.
The SpectacleTampa, FL · Jun 7, 2009#41
Originally Posted by Tamago ↑
😆 you have no experience with forced induction in the 1nzfe.

i do

i know what works safely.

🤷

you're going on my ignore list, not worth my time answering your retarded arguments.
Cute. Guess I got under someone's skin lol

Anyone else venture to go toe to toe with me on the merits of boosting a car without proper engine management? I've got nothing else to do today.
cali yarisCanoga Park, CA · Jun 7, 2009#42
Nope, not going to argue with an armchair expert with respect to the 1NZ-FE. I have other stuff to do today. 😉

I've never recommended jumping into a turbo project without being clear on the risks to your motor and your wallet. You haven't read many of my posts if that is what you think.
The SpectacleTampa, FL · Jun 7, 2009#43
You guys talk about having experience with the 1nz-fe like its some kind of technical marvel. Its a 100hp motor for god sakes.
Nexus1155Dorchester · Jun 7, 2009#44
And what experience do you have and on what cars pray tell? I'd love to hear your adventures
ka0sxCA east bay · Jun 7, 2009#45
Originally Posted by The Spectacle ↑
You guys talk about having experience with the 1nz-fe like its some kind of technical marvel. Its a 100hp motor for god sakes.
Picture not included in this copy

need i quote the line?
cali yarisCanoga Park, CA · Jun 8, 2009#46
"you have failed me for the last time, captain"?

is that right? do I win something? 🙂
ka0sxCA east bay · Jun 8, 2009#47
Originally Posted by cali yaris ↑
"you have failed me for the last time, captain"?

is that right? do I win something? 🙂
if i ever see you in person i will hand you a stale old cookie =P
that is the actual line from the scene, but i was refering to the "motivational" version "i find your lack of faith disturbing"


refering to
Originally Posted by The Spectacle(the unimpressionable)
You guys talk about having experience with the 1nz-fe like its some kind of technical marvel. Its a 100hp motor for god sakes.
who apparently is oblivious to the amount of engineering that goes into a modern engine. Especially no credit is given to the software and computer engineering advances that allow these engines to act and adapt in such a versatile fashion.
anonymous userwindward oahu · Jun 8, 2009#48
*subscribed* :)
TamagoOff Grid · Jun 8, 2009#49
Originally Posted by ka0sx ↑
if i ever see you in person i will hand you a stale old cookie =P
that is the actual line from the scene, but i was refering to the "motivational" version "i find your lack of faith disturbing"


refering to


who apparently is oblivious to the amount of engineering that goes into a modern engine. Especially no credit is given to the software and computer engineering advances that allow these engines to act and adapt in such a versatile fashion.
and the fact that it makes some of the best hp/lb of ANY engine in any car in the world.
06silveryarisPuerto Rico · Jun 8, 2009#50
I do not know what is the big deal when someone wants to do "something out of the norm" or not buying some "kit",of course it would work with no intercooler and an after market piggy back or ecu. Just do bigger injectors.I have seen people here do that with Hyundais Brio and Mitsubishis mirages they even get pipes done cheap at a mufflershop. Doesn't look pretty all but it works. For a low boost aplication it will be just fine. budget turbo the butt dyno is happy and so is the wallet.