if i were to do it again, i'd trade engine management for a good solid water/meth injection setup. (on low boost)
GT17 too small?
95 posts · 18,780 views · page 2 of 2
Replies continued
if i were to do it again, i'd trade engine management for a good solid water/meth injection setup. (on low boost)Yeah after reading more on here (special thanks to Morgan for actually doing it), I probably would too. May still get around to it.
It's a Garrett. Comes off a Saab 9-3 and are pretty easy to come by.
worth every single penny! good for cooling and reduces knock, what could be better? HIGHLY recommended, especially if you don't end up using a piggy back or some type of other engine management!Originally Posted by cali yaris ↑Yeah after reading more on here (special thanks to Morgan for actually doing it), I probably would too. May still get around to it.
(yes, you could probably tune it out if you can advance your timing, but I can't so instead I use it as a safety feature not for performance)
we can slap in a small turbo and run it without major problems with the 1NZFE?No one said that. There is a risk involved with any major engine modification, including this. What I said is that at least two of us have run turbos and not blown our motors. That is all the data there is -- so choose CAREFULLY before you jump in.
yeah, through your butt 🤣Originally Posted by PK198105 ↑Can someone make a list of PSI vs Gain or am i talking through my butt?
Just kidding
Is not that simple. It depends on the turbo you use and your set up. So there is no way to say x amount of HP per psi.
You could said though that for any given set up the car puts out xamount of HP for psi. That would be true within a psi range.
IE:
If Garm's old set up made 180hp at 8psi and lets say the base power was 100hp, then you can said his turbo made 10hp per psi. You can also assume that the same set up at 10psi would put out 200hp.
As the PSI goes up and you start going out of the effeciency area or the turbo, the numbers will change (decrease)...
One of the advantages of standalone management is that you can switch between multiple MAPS...Originally Posted by cali yaris ↑Yeah after reading more on here (special thanks to Morgan for actually doing it), I probably would too. May still get around to it.
So you can have th everyday map for regular gas, then a Meth map and finally the all out race gas map.
The Meth map comes pretty handy when you want to have some fun and don't have some VP handy... or if you don't want to pay the race gas price.
240-250whp for every day driving on regular gas
260-270whp on meth
300+whp on race gas
*thud*Originally Posted by Tamago ↑and the fact that it makes some of the best hp/lb of ANY engine in any car in the world.
Now I've heard it all.
the next person that uses the term "slap on" in the same sentence as "turbo" needs a permaban.
spectacle needs a permaban..........we already have enough bs on the forum as is.
but now seriously is the 1NZFE able to take a turbo without modifications without destroying it?No one can answer that question with any certainty. I'm not sure how many different ways I can say that. I can only point at the real world data we have, me and Tamago who ran turbos on the 1.5L motor with no damage. Loss in longevity? Again, can't answer that either.
Maybe in 3-5 years, when a lot more people have tried and either succeeded or failed, the question can be answered with some data to back it up.
Has anyone ever told you that you know nothing about cars? or is that a first too!Originally Posted by The Spectacle ↑*thud*
Now I've heard it all.
Its a first.
now like a 2nd or 3rd...Originally Posted by The Spectacle ↑Its a first.
bench racing = real-life, knuckle-skinning experience, didn't y'all know? that's why we can "slap on" turbos and coilovers....
lol @ the bashing on spectacle.
you feel left out? 🤷😆😳😎😲👍 🤣 😳Originally Posted by PETERPOOP ↑lol @ the bashing on spectacle.
I don't have any experience with a Yaris, let alone a turbo one. But, I do have a turbo supra.
Here are some of the basics that I know about Turbo cars. Please let me know if I am wrong though.
-A car with a Turbo stock will have an ECU that is set to retard timing at higher rpm / higher boost.
-Turbo cars have much lower engine compression and are better able to handle boost.
-NA cars try to achieve a Air/Fuel Ratio of about 14.7, probably richer than that at about 13-14 or less when at full throttle.
-A Turbo cars ECU is set to run at 11-12 AFR at full throttle. Running richer allows the gas to cool the piston and reduces the risk of detonation.
-Turbo cars usually have some or all of the rotating assembly forged.
So, basically, running a turbo without any modifications on an economy engine, you will detonate with AFRs around 14, even at 7psi. I hope someone before me set you guys straight but this thread looks like Honda Tech. It's just horrible.
Here are some of the basics that I know about Turbo cars. Please let me know if I am wrong though.
-A car with a Turbo stock will have an ECU that is set to retard timing at higher rpm / higher boost.
-Turbo cars have much lower engine compression and are better able to handle boost.
-NA cars try to achieve a Air/Fuel Ratio of about 14.7, probably richer than that at about 13-14 or less when at full throttle.
-A Turbo cars ECU is set to run at 11-12 AFR at full throttle. Running richer allows the gas to cool the piston and reduces the risk of detonation.
-Turbo cars usually have some or all of the rotating assembly forged.
So, basically, running a turbo without any modifications on an economy engine, you will detonate with AFRs around 14, even at 7psi. I hope someone before me set you guys straight but this thread looks like Honda Tech. It's just horrible.
guessing you missed the part where we suggested bigger injectors to help with the "stock" AFR's ?Originally Posted by CDavis7M ↑
So, basically, running a turbo without any modifications on an economy engine, you will detonate with AFRs around 14, even at 7psi. I hope someone before me set you guys straight but this thread looks like Honda Tech. It's just horrible.
when the car goes into open loop mode, larger injectors will provide more than enough fuel to keep boost mode cool
I hope someone before me set you guys straight...It's just horrible.You've clearly missed quite a bit of this discussion, you haven't played with a 1.5L Toyota motor, and your tone of disrespect (post count: 4) for some pretty knowledgable tuners is the horrible part. /rant off
someone put one of these turbos on the yaris:
http://www.compturbo.com/products/in...&product=CT340
TO4E T3/T4 Hybrid turbocharger with a 40mm Comp wheel stage 1 turbine wheel .36 Non-Port T3 turbine housing.
The Triple Ball Bearing version is only $1600. Instant 250hp at low rpm would be nice!
http://www.compturbo.com/products/in...&product=CT340
TO4E T3/T4 Hybrid turbocharger with a 40mm Comp wheel stage 1 turbine wheel .36 Non-Port T3 turbine housing.
The Triple Ball Bearing version is only $1600. Instant 250hp at low rpm would be nice!
i think people forget that all cars are NOT the same.....a yaris motor is quite different than a turbo supra motor..correct me if im wrong though please.
This will work. But, obviously it's not the best idea. And considering the cost of a piggyback and a tune compared to the cost of a turbo, I don't see any reason to risk an engine to save a few bucks.Originally Posted by Tamago ↑guessing you missed the part where we suggested bigger injectors to help with the "stock" AFR's ?
when the car goes into open loop mode, larger injectors will provide more than enough fuel to keep boost mode cool
I did miss some of the discussion. And sorry for the disrespect. But, calling out someone based on post count is also immature. I would expect better from a vendor.Originally Posted by cali yaris ↑You've clearly missed quite a bit of this discussion, you haven't played with a 1.5L Toyota motor, and your tone of disrespect (post count: 4) for some pretty knowledgable tuners is the horrible part. /rant off
That's what I was suggesting.Originally Posted by mikenacarato ↑a yaris motor is quite different than a turbo supra motor..correct me if im wrong though please.
just curious.....do you have a yaris cdavis? if not...why are you here?
yes
well welcome aboard.
Just placed my orderresearch is golden, if you were trying to bash him, ye lose all chance now... sorry mike lol
considering the cost of a piggyback and a tune compared to the cost of a turboAnother problematic approach (so far) -- piggyback didn't work for me and several others. Doesn't mean it can't work, but you posted this (I'm guessing) without real world knowledge of a successful application on a Yaris. Another indication you are drawing from other-car experience, not specific to the Yaris, and also an indication you haven't read the other threads about tuning these cars. Not totally irrelevant, but not all that helpful either.
Sorry about the post count snipe, but you pissed me off. I found my happy space again since then.
oooh man...im gonna lose sleep over this one... 🙄Originally Posted by Nexus1155 ↑research is golden, if you were trying to bash him, ye lose all chance now... sorry mike lol
You are right. I'll do more research before I make Yaris specific advice.Originally Posted by cali yaris ↑Another problematic approach (so far) -- piggyback didn't work for me and several others. Doesn't mean it can't work, but you posted this (I'm guessing) without real world knowledge of a successful application on a Yaris.
CDavis7M don't be afraid to state your opinion in here. After all, it is your opinion and you are entitled to it. You don't need experience with a turbo 1NZ-FE to know that 90% of what's been posted in this thread that didn't have my name on it is complete and utter bullshit. I'd start quoting posts, but I'm not that bored right now. But, here are some of the brilliant, insightful highlights:
- You can run the stock ECU up to 'x' psi and the car will be fine...with no intercooler
- The stock ECU retards timing in boost based off the knock sensor and thats safe up to 'x' psi
- The 1NZ-FE is one of the best hp/lb in the world (That one takes the fucking cake)
- Running bigger injectors is a fix action for running lean in boost
- Running meth is a great fix to reduce your knocking motor in boost. In fact, its pretty much all you need if you're knocking
This is been quite entertaining. Besides cali yaris, none of you guys have a fucking clue what you're talking about. I don't need to post up my 'creds' to prove I know what I'm talking about and I certainly don't have to have experience playing with a turbo Yaris to know that more than half of you are full of really, really stinky shit when it comes to forced induction.
I encourage anyone reading this that is on the fence about doing some of the absurdly retarded shit suggested in this thread is to do some research outside of yarisworld to get a good idea of how to turbo a N/A car. Among all the crazy shit in this thread that you shouldn't do, the NUMBER ONE thing NOT to do is run your car with a stock ecu without AT LEAST a piggyback or another (better) form of engine management. Just don't do it. Please.
- You can run the stock ECU up to 'x' psi and the car will be fine...with no intercooler
- The stock ECU retards timing in boost based off the knock sensor and thats safe up to 'x' psi
- The 1NZ-FE is one of the best hp/lb in the world (That one takes the fucking cake)
- Running bigger injectors is a fix action for running lean in boost
- Running meth is a great fix to reduce your knocking motor in boost. In fact, its pretty much all you need if you're knocking
This is been quite entertaining. Besides cali yaris, none of you guys have a fucking clue what you're talking about. I don't need to post up my 'creds' to prove I know what I'm talking about and I certainly don't have to have experience playing with a turbo Yaris to know that more than half of you are full of really, really stinky shit when it comes to forced induction.
I encourage anyone reading this that is on the fence about doing some of the absurdly retarded shit suggested in this thread is to do some research outside of yarisworld to get a good idea of how to turbo a N/A car. Among all the crazy shit in this thread that you shouldn't do, the NUMBER ONE thing NOT to do is run your car with a stock ecu without AT LEAST a piggyback or another (better) form of engine management. Just don't do it. Please.
YW - 1 Testicle - 0
Damn guys, this has turned out to an all out flame fest.
MIKE! i said no... LOL, but yeah this has turned out to an all out flame fest, when you can pull a 2.7T engine all by yourself and tune the ECU by yourself via benchflashing then come back to me
because honestly i could do Hondas all day and night, its crazy stuff like a huge Euro engines literally stuffed into the bay without a hand of space to move in that makes you a champ..... Up next 4.2TT RS6 Engine :) can't wait for this beast
I mean you might have credentials and everything and know alot, but please don't act like you are God himself, i mean Tamago does it to be cocky and he is a smart ass dude like he really knows his stuff, but everyone has their limits too which is what you gotta remember, i mean .... I can't weld... I know I can't so I don't even bother and bring it to a shop
because honestly i could do Hondas all day and night, its crazy stuff like a huge Euro engines literally stuffed into the bay without a hand of space to move in that makes you a champ..... Up next 4.2TT RS6 Engine :) can't wait for this beast
I mean you might have credentials and everything and know alot, but please don't act like you are God himself, i mean Tamago does it to be cocky and he is a smart ass dude like he really knows his stuff, but everyone has their limits too which is what you gotta remember, i mean .... I can't weld... I know I can't so I don't even bother and bring it to a shop
I'm hungover//////q
"Knock" is a process where fuel combustion happens prior to ignition and is temperature and pressure based so by reducing ignition temps (water) and/or reducing the chances of preignition (methanol/higher octane fuel) it can indeed solve many minor to moderate knock issues. In addition to the yaris' keen ability to pull/retard timing at the drop of a hat, knock is almost inevitable in any FI application for this car, addressing it with water/meth and higher octane fuel is par for the course..... As noted in several threads in the FI forum, kthnxbyiOriginally Posted by The Spectacle ↑- Running meth is a great fix to reduce your knocking motor in boost. In fact, its pretty much all you need if you're knocking
just to clarify if I used too many big words
please respect the hard work and dedication of the members who have tried and tested many different methods with the 1nz before posting like you know more than, what was it "98%" of us?
Picture not included in this copyOriginally Posted by Morgan ↑"Knock" is a process where fuel combustion happens prior to ignition and is temperature and pressure based so by reducing ignition temps (water) and/or reducing the chances of preignition (methanol/higher octane fuel) it can indeed solve many minor to moderate knock issues. In addition to the yaris' keen ability to pull/retard timing at the drop of a hat, knock is almost inevitable in any FI application for this car, addressing it with water/meth and higher octane fuel is par for the course..... As noted in several threads in the FI forum, kthnxbyi
just to clarify if I used too many big words
please respect the hard work and dedication of the members who have tried and tested many different methods with the 1nz before posting like you know more than, what was it "98%" of us?
Originally Posted by The Spectacle ↑Apparently (per Garm) the FIC doesn't work
Link to a thread or page that is not in the archive
well this thread is getting cleaned up... looks like it might as well be locked.
IBFTL!!!!!
Who is the douche that deleted my post about deleting my posts? The least you could do is man up and PM me.
Did you learn anything about cars yet?Originally Posted by The Spectacle ↑Who is the douche that deleted my post about deleting my posts? The least you could do is man up and PM me.
he's making a himself of himselfOriginally Posted by PK198105 ↑your screen name suits you 100%😁
hahaha
Wow dude you just made your self seem like a total d*ck. Good job👏 It's not what your saying, but your delivery as a whole is just wrong. People skills; get some please. Don't expect anyone on the forum to take you seriously now.
Originally Posted by The Spectacle ↑CDavis7M don't be afraid to state your opinion in here. After all, it is your opinion and you are entitled to it. You don't need experience with a turbo 1NZ-FE to know that 90% of what's been posted in this thread that didn't have my name on it is complete and utter bullshit. I'd start quoting posts, but I'm not that bored right now. But, here are some of the brilliant, insightful highlights:
- You can run the stock ECU up to 'x' psi and the car will be fine...with no intercooler
- The stock ECU retards timing in boost based off the knock sensor and thats safe up to 'x' psi
- The 1NZ-FE is one of the best hp/lb in the world (That one takes the fucking cake)
- Running bigger injectors is a fix action for running lean in boost
- Running meth is a great fix to reduce your knocking motor in boost. In fact, its pretty much all you need if you're knocking
This is been quite entertaining. Besides cali yaris, none of you guys have a fucking clue what you're talking about. I don't need to post up my 'creds' to prove I know what I'm talking about and I certainly don't have to have experience playing with a turbo Yaris to know that more than half of you are full of really, really stinky shit when it comes to forced induction.
I encourage anyone reading this that is on the fence about doing some of the absurdly retarded shit suggested in this thread is to do some research outside of yarisworld to get a good idea of how to turbo a N/A car. Among all the crazy shit in this thread that you shouldn't do, the NUMBER ONE thing NOT to do is run your car with a stock ecu without AT LEAST a piggyback or another (better) form of engine management. Just don't do it. Please.