Yarisworld Archive

Retrofit Blitz Supercharger

92 posts · 37,802 views · page 1 of 2

MorganOriginal postPCB, FL · May 4, 2009#1
Well... its installed and fantastic!

This is an xA/xB kit I got used with 3000 miles and it came with all of the original mounting hardware and components.

My boyfriend Kevin deserves a lot of credit for this project. I assisted and helped where I could but this project was a little over what I felt comfortable with in my mechanical abilities. Really though it went very smoothly, its totally worth it.

For starters anyone thinking about getting a scion kit, realize that there are several main modifications you will need to make:
1 - Throttle Body (xA = 3 bolt; Yaris = 4 bolt) We made an adapter plate to mate the supercharger intake piece to the Yaris TB. I already bypassed the coolant line several months ago, in this project I shortened the coolant line that ran to it.
2 - Intake (xA = different position for TB; Yaris = you need a custom intake of some kind) We flipped the stock air box upside down to reduce the chance of CELs, so far so good. I need K&N style filter but I was impatient and wanted it running asap 😉
3 - Pulley/Belt (xA = 66.7 to 67 in belt; Yaris = 66in belt) I am using the gatorback 66.7in belt with an idler pulley from Advanced, I'll try to track down the exact part number later. The pulley I bought was like $18 and gives a better wrap to the supercharger and I don't have any clearance issues with it.

However the biggest change from my setup with others here, is my AEM water methanol system. I tapped my washer fluid tank (and installed the float switch in the washer tank) for lack of space of either the 2 quart or 4 quart AEM tanks. There is an led mounted in the car to tell me when the AEM is spraying and when the system is low. The pump is mounted on my right strut tower and the controller box is behind the lower passenger glove box.

Can't think of too much else at the moment, its been 3 days up til 2am working on this project. Soldering in everything and taking our time really paid off. It cranked right up and runs like a champ!

halfway through:
Picture not included in this copy

completed:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Its pretty loud, I might get some videos/better pictures this evening

~Mo

Replies 91

TamagoOff Grid · May 4, 2009#2
congrats! i'm glad it all worked out :) can't wait to see your numbers (and i can't wait for you to take "fastest SC yaris" away from our lil buddy
ChinoCharlesOH · May 4, 2009#3
NIIIIICE 🙇 You get +400 cool points for not buying the out-of-the-box solution.
AlexNet0Rockland, ME · May 4, 2009#4
OMG, that is awesome, definitely need some vids, mad props
kurokoma-kunmy own little world · May 4, 2009#5
Fantastic! 👍 so exciting, and really heartwarming the way you and your boyfriend share the love of cars
PHXDEMONPhoenix, AZ · May 4, 2009#6
Another boosted member 👍 Hopefully no CEL's Out of curiosity did you retrofit because you got a smoking deal on that kit?
CASTREXCosta Rica · May 4, 2009#7
It would be interesting to see the effect of the meth injection on that set up.

That should take care of the knocking problems that other blitz users have reported and should prevent the ECU to pull in too much timing. Heck you might even get away using regular fuel on your car.

Congrats!

Post some numbers soon!
1NZYaris1New Zealand · May 4, 2009#8
👏👏 well done that looks amazing 🙇 🙇 so jealous 👍
MorganThread starterPCB, FL · May 4, 2009#9
Originally Posted by Tamago ↑
congrats! i'm glad it all worked out :) can't wait to see your numbers (and i can't wait for you to take "fastest SC yaris" away from our lil buddy)
I hope to have it up on the dyno when I get back from the vacation 😉

Originally Posted by kurokoma-kun ↑
Fantastic! 👍 so exciting, and really heartwarming the way you and your boyfriend share the love of cars
We have spent many late nights hot and sweaty... but we enjoy doing the car stuff together. Its funny how we can get mad at each other during an install like this and still go to bed with no ill feelings, the cars are therapeutic in a way

Originally Posted by PHXDEMON ↑
Another boosted member 👍 Hopefully no CEL's Out of curiosity did you retrofit because you got a smoking deal on that kit?
yes! it was a great deal and I knew if I passed it up now I would never get the opportunity to do something like this again for quite some time.


Originally Posted by 1NZYaris1 ↑
👏👏 well done that looks amazing 🙇 🙇 so jealous 👍
Thanks! There are still a few loose ends to tie up and finish, but I'm still in shock that it cranked right up :smile;


----

I finally feel clean enough (after two showers and a soak in the hot tub)to leave the house and go show it off to some other car friends!
TamagoOff Grid · May 4, 2009#10
i have pieces that'd build you an amazing CAI for your setup. PM me
MorganThread starterPCB, FL · May 4, 2009#11
fuel controller just took some thinking to get right, matching up the pins on the ecu between the two cars to figure out which wire goes where...

the xA has one ground, the Yaris has two or three grounds - other than that it was pretty easy to figure out
LtNoogieWest Hills, CA · May 4, 2009#12
How do you like the drive by cable response instead of drive by wire?
kurokoma-kunmy own little world · May 4, 2009#13
Morgan will you please say more about the water meth injection kit?

I understand how it cools the fuel air mixture, but not clear about the other advantages/disadvantages. Does injecting water into the system have any negative effects?

Also I wondering about cost--I experienced some of the things Castrex described, and right now I'm buying octane booster to combat but getting satisfactory + stable results. However, I haven't given much thought to the long term effects. If you factor in the cost of the water meth kit and buying the methanol, is this method still better long-term?

PS to all -- if by asking this I unwittingly brought up a controversial topic or asked a dumb Q, please dont argue in Morgan's thread, mmmmkkaayyyy? 😛
LtNoogieWest Hills, CA · May 4, 2009#14
KK, I'm watching closely that throttle body adapter plate thread. If they make a threaded hole that will fit a water injector, that may be the way for you and me to go. Until then, just continue using the turkey baster.😛
TamagoOff Grid · May 4, 2009#15
Originally Posted by kurokoma-kun ↑
Morgan will you please say more about the water meth injection kit?

I understand how it cools the fuel air mixture, but not clear about the other advantages/disadvantages. Does injecting water into the system have any negative effects?

Also I wondering about cost--I experienced some of the things Castrex described, and right now I'm buying octane booster to combat but getting satisfactory + stable results. However, I haven't given much thought to the long term effects. If you factor in the cost of the water meth kit and buying the methanol, is this method still better long-term?

PS to all -- if by asking this I unwittingly brought up a controversial topic or asked a dumb Q, please dont argue in Morgan's thread, mmmmkkaayyyy? 😛
not a dumb question, but could be answered using google.

water/meth injection has been used for over 50 years, and does not harm your engine if done properly
kurokoma-kunmy own little world · May 4, 2009#16
Tamago, I consulted Google before asking, and still came away with questions. I was hoping someone like you would be willing to elaborate, or that she might like a chance to explain it herself. But for Morgan's sake I'll ask in a different thread. Thanks anyway. 🙂
kngrsllSpartanburg, SC · May 4, 2009#17
wow, really cool...
cali yarisCanoga Park, CA · May 4, 2009#18
well done! 👏
PETERPOOPOahu · May 4, 2009#19
awesome! i plan on doing meth injection during my tune also! have fun with your extra HP! 🙌
thebarberGrand Rapids, MI · May 4, 2009#20
very nice....

best to buy washer fluid by the case

im curious to see the adapter plate for the throttle body
808_YarisHI · May 5, 2009#21
amazing! can't wait to see the tests!
SabretoothSt Cloud FL · May 5, 2009#22
Just Wow...only the 2nd or 3rd Retrofitted Yaris to an Xa or Xb kit. Major congratz!

I was hoping sometime that someone would attempt a Greddy Xb S/C kit so we can see how that goes. Seeing it comes with Emanage blue, we could tune it similar to Chino's kit has been tuned. I know of one vid on Youtube of a Yaris with the Xb supercharger, although I dont know how it was done, or if its still running strong.
TamagoOff Grid · May 5, 2009#23
IMO, Blitz (lysholm) is a superior supercharger to Greddy (Eaton) as the Eaton unit is less efficient
TheRealEnthMiami, FL · May 5, 2009#24
sick with it
nsmitchellRichmond, VA · May 5, 2009#25
Awesome! So the meth/water is used to cut out knocking so you can increase compression?
MorganThread starterPCB, FL · May 5, 2009#26
the water/meth kit is from AEM, I ordered it from Summit for about $400 shipped and it comes with different size injectors (I just used the smallest one in the kit). The nozzle must be put BEFORE the TB but AFTER the maf. The AEM system is progressive and you can set what psi it will start and what psi you want full to be. The kit has a controller box mounted in the car for tuning and my only complaint is that the adjuster is quite obviously set up to handle like 30+lbs of pressure so adjusting it for the wee 6-8ish lbs has been interesting.

I have kept my original Yaris TB, so no cable its still DriveByWire. But the plate that mates the two together is basically a glorified gasket made from StarBoard (marine ABS plastic) with for a 2ftx3ftx3/4in was about $30. StarBoard may quite possibly be the coolest material to work with ever. It is rated for about 250*F so its safe for the temperature range I needed and you can drill into it and cut it with normal wood working tools. Basically my TB is upside down and one of the holes in the Yaris TB is matched up with a hole to the Blitz intake tube and then the rest of the holes are either counter sunk into the StarBoard or drilled through with a nut and bolt to hold them together. And of course rtv to make a nice seal.

I am supposed to be going out of town on Wed, might push it back til Thursday so I can have more time to get ready. I've already burned through 1/3 tank of fuel (93 octane, cause Florida is awesome!) and 1/4 water-meth mixture with flooring it and trying to tune it.

The water methanol is pretty easy to set up, the US has been doing it will all piston driven airplane engines since like WWII and its known to be pretty safe and reliable. Most people put a water injection setup on their cars to squeeze out more octane and get more out of the engine. Living in Florida with no intercooler, I'm using it to cool and reduce my chances of knock. The concentration depends on what you need. Water - to cool; Methanol - increase octane/reduce knock. I need both so I'm running pretty much a 50/50 mix by volume.

I really loved chemistry and never thought I'd EVER have to use it in the real world. BUT when you buy a 1 gallon washer fluid and its a 33% methanol concentration and you have 100ml of Heet (~$2 from any auto parts store) which is 99% methanol. Rough numbers find something to pour both fluids into and shake. After its all mixed together you have a 40% methanol by volume and for now a 40meth/60water mix is close enough. For summer I will probably need to bump it up to 50/50.

Look into the concentrations for your needs, I'm not using this setup for more power but when tuned correctly it will increase the octane and cool the engine... so voila more power 🙂

hope that may answer some questions? all in all I probably wont go through that much methanol (or gas lol) but its new and the first few tanks after stuff like this are always pretty crappy mileage, right 😁
MorganThread starterPCB, FL · May 5, 2009#27
update - I noticed the belt slipping (and squeaking) while running the a/c and the supercharger, so I swapped back to the pulley that came with the kit and got a 66 inch belt [I was running a pulley from Advanced Auto Parts and a Gatorback 66.7in belt]

But after some fun in second gear, it pulls just as hard and runs great with 4 people and the a/c on
eTiMaGoBangkok, Thailand · May 9, 2009#28
how did I miss this? great job, more boosted ladies FTW 😁
supmetSouthern California · May 9, 2009#29
Originally Posted by Morgan ↑
I really loved chemistry and never thought I'd EVER have to use it in the real world. BUT when you buy a 1 gallon washer fluid and its a 33% methanol concentration and you have 100ml of Heet (~$2 from any auto parts store) which is 99% methanol. Rough numbers find something to pour both fluids into and shake. After its all mixed together you have a 40% methanol by volume and for now a 40meth/60water mix is close enough. For summer I will probably need to bump it up to 50/50.
100 mL = 3.38 oz

33% of one gallon = 42.66 oz

42.66 + 3.38 = 46.05

46.05 oz /131.38 oz = 35%

Is my math wrong?
ztrack157Biggs, CA · May 9, 2009#30
nope looks right. 35.04%
Russelt3hPirateEpcot · May 11, 2009#31
as long as her mixture is consistent and tuned on that same mix it doesn't really matter what the % is.

same goes with mixing fuels, if I ran 1/4 tank 93 and 5 gallon 110 for my tune anytime I run my "race map" I just need to have 1/4 or less of 93 and 5 gallon of 110 and I'm good. (note, example isn't from a Yaris, at least not yet anyway... ;) ).
MorganThread starterPCB, FL · May 14, 2009#32
% by volume and % by weight are different... I can never remember which one is which but I know the math you provided is not the math I used to determine the concentration
TamagoOff Grid · May 14, 2009#33
Originally Posted by Morgan ↑
% by volume and % by weight are totally different...
you geek ;)

welcome back!
MorganThread starterPCB, FL · May 14, 2009#34
hehe ninja edit... 😁 and thanks!
TamagoOff Grid · May 14, 2009#35
Originally Posted by Morgan ↑
% by volume and % by weight are different... I can never remember which one is which but I know the math you provided is not the math I used to determine the concentration
methanol and water have different specific gravities, for sure.
Russelt3hPirateEpcot · May 14, 2009#36
Originally Posted by Tamago ↑
methanol and water have different specific gravities, for sure.
who cares!

use the same mixture everytime and stop doing math. 🤣
TamagoOff Grid · May 14, 2009#37
Originally Posted by Russelt3hPirate ↑
who cares!

use the same mixture everytime and stop doing math. 🤣
that's hilarious coming from you sir 😆
MorganThread starterPCB, FL · May 25, 2009#38
well the methanol makes a HUGE difference 😉 and on 100% (well 99.99%) it runs great, current set up is with 50% which does quite well.

I originally tapped the washer fluid tank to feed the pump, but my float/low switch wasn't functioning at the right angle so I went ahead and just installed the 1 gallon tank in the rear of the car. Now that I can actually see the before and after levels of the tank, that car drinks the methanol!

After trying a few possible locations I went with the back of the seat since I can shut off the feed tube and there are quick connects on the switch should I need to take it out and use the cargo room... guess my rear seats are staying in for a while :/

here are some pictures of the tank location:
(the first picture is screwy... stupid iPhone...)
Picture not included in this copy
Picture not included in this copy

valve/quick connects:
Picture not included in this copy
Nexus1155Dorchester · May 25, 2009#39
Looks awesome!!!!, now go get some dyno time :D :P
cali yarisCanoga Park, CA · May 25, 2009#40
+1
ShroomsterOrlando · May 25, 2009#41
maybe think about somehow enclosing the tank? just for extra leak protection?
Nexus1155Dorchester · May 25, 2009#42
the tank is pretty thick and flexible i doubt anything will puncture it easily ;)

Morgan you can always upgrade to the 7L tank they have in the stock japanese STI's :D

Picture not included in this copy
TamagoOff Grid · May 25, 2009#43
looks great! glad it all came out as planned! btw can't wait to see your install pix of the hub spacers :)
PETERPOOPOahu · May 25, 2009#44
Originally Posted by Nexus1155 ↑
the tank is pretty thick and flexible i doubt anything will puncture it easily ;)

Morgan you can always upgrade to the 7L tank they have in the stock japanese STI's :D

Picture not included in this copy
crazzzzzzzzzzzzy
MorganThread starterPCB, FL · May 26, 2009#45
... the tank says 4 quarts but it holds close to 1.2 gallons, and that 7L tank is only 1.8 gallons...
SE-RIXBOROgarage · May 26, 2009#46
looks very nice. whats the HP on this badboy?
MorganThread starterPCB, FL · May 31, 2009#47
Originally Posted by SE-RIX ↑
looks very nice. whats the HP on this badboy?
I haven't had a chance to dyno it yet... but for fun I did get to go to our little local drag strip. Its only 1/8th mile and to be honest I hate everything about drag racing so I can't say I put all of my effort into this but here are some videos:

run 1
r/t .174s
60 2.542s
660 6.957s
1320 (1/8th) 10.613s @ 66.03mph
http://www.youtube.com/watch?v=FTUoZ6sjHew

run 2
r/t .258s
60 2.414s
660 6.748s
1320 (1/8th) 10.401 @ 68.40mph
http://www.youtube.com/watch?v=FTUoZ...e=channel_page

I had fun, but I'd rather be at an autoX anyday 😁
cali yarisCanoga Park, CA · Jun 1, 2009#48
ha nice -- I can't wait to go do that again.
MorganThread starterPCB, FL · Jun 1, 2009#49
yeah, it was really hot and humid out so I stayed for a few more runs but didn't really get any faster - florida sucks all of the fun out of so many outdoor events :/
LtNoogieWest Hills, CA · Jun 1, 2009#50
That is awesome. Do you know what your ignition timing reads with and without the water/meth injection?

I did have to laugh a little seeing the hot rod next to the Yaris. Kinda like my Yaris next to the Ferrari F430 at my last autox.