Yarisworld Archive

Retrofit Blitz Supercharger

92 posts · 37,802 views · page 2 of 2

Replies continued

MorganThread starterPCB, FL · Jun 1, 2009#51
Originally Posted by LtNoogie ↑
That is awesome. Do you know what your ignition timing reads with and without the water/meth injection?

I did have to laugh a little seeing the hot rod next to the Yaris. Kinda like my Yaris next to the Ferrari F430 at my last autox.
I have no idea, the only gauges I have in my car are the speedo, clock and gas gauge... lame, I know! I need something to read a/f and timing to see what all is happening to the car from those magic little black boxes Blitz tells you to wire in.

Yeah that hot rod guy was awesome though, made me laugh in the staging lanes which took my mind off of the ridiculous nerves I had, haha! [hot rod ran a 8.546s @ 83.57mph]
MorganThread starterPCB, FL · Jul 1, 2009#52
boo overtightened belt!

Picture not included in this copy

well guess I'll have to drive the miata for a few days til I get the new one on, darn! 😉
changchewsoonMalaysia · Jul 1, 2009#53
hi morgan,

good choice on the water/methanol injection kit. i am using the aem kit too and im currently running a 50/50 mixture.

the car hasn't been completely dialed in yet for the kit as the tuner is still trying to figure out at which psi to start spraying as im boosting very low.

externally even after many rounds of dyno pulls, when we put our hands to the piping near the throttle body you can't feel any heat at all compared to the piping right after the intercooler.

it is very obvious the injection is lowering the temperature in a major way.
MorganThread starterPCB, FL · Jul 2, 2009#54
Originally Posted by changchewsoon ↑
hi morgan,

good choice on the water/methanol injection kit. i am using the aem kit too and im currently running a 50/50 mixture.

the car hasn't been completely dialed in yet for the kit as the tuner is still trying to figure out at which psi to start spraying as im boosting very low.

externally even after many rounds of dyno pulls, when we put our hands to the piping near the throttle body you can't feel any heat at all compared to the piping right after the intercooler.

it is very obvious the injection is lowering the temperature in a major way.
My start psi is about 2-3psi and full is at like 9psi. It seems to really like that at a 50/50 mix. I'm using the smallest injector that came with the AEM, not sure the exact cc/min...

Really just glad to know someone else is using water/meth in a boosted application! I'm not alone, wahoo! Since the blitz is nonintercooled and I'm in 110 degree weather, in glad I went with the AEM kit, my charge pipe forms cold condensation every time. I'd def like more of your experiments with your car and the AEM kit!
changchewsoonMalaysia · Jul 3, 2009#55
Hey me too! I'm too using the smallest size nozzle that came with the kit. We're thinking of starting injection from 4psi onwards and full at 10psi.

condensation?? oh wow...that is really something! i didn't notice any condensation on my pipings. i purchased the water/methanol mixture from my tuner as he stocks racing fuel in barrels and methanol is just one of the barrels he keeps in his warehouse together with the racing fuel.

i wonder whether the quality of the methanol makes any different or methanol is just methanol?

im glad to know there are others out there using it in their car too! your blitz kit is damn sexyyy!
MorganThread starterPCB, FL · Jul 3, 2009#56
changchewsoon - I think that partially the 80% humidity helps out with my condensation claim to fame, but its at least a 100* temp differential according to the laser thermometer. Oh and as for quality of methanol, I was using "gas line dryer" aka "HEET" and since switching to mass purchased methanol, I haven't really noticed too much of a difference. Thanks!!!

echo - yes! after the MAF but before the throttle body, so either behind (since there is a sticker there) or right where the sticker is would be perfect... on mine, the intake setup I currently have (that I hate) I have about 1.5" of room to do anything with, but I made it work

Just a hint but try to angle the injector as much as possible AWAY from the MAF and towards the TB. I got about a 45* angle on my injector without too much hassle, if you can only get it dead on and directly in, its not a huge problem cause the supercharger creates A LOT of suction :) oh and to make sure I'm not spraying all the time my "start" psi for injection is set higher than 1-2psi, that way you dont pool mix while at idle or ultra low boost... hope that helps!
MorganThread starterPCB, FL · Jul 3, 2009#57
yeah I've considered that as well, but it threaded into the pipe I had really well and so far it works very reliably
changchewsoonMalaysia · Jul 4, 2009#58
hurray for water/methanol injection!! 😁 😁
MorganThread starterPCB, FL · Jul 4, 2009#59
exactly, it way cheaper than fabricating an intercooler on the blitz and way more efficient!
cali yarisCanoga Park, CA · Jul 4, 2009#60
I may have to jump on board for this. Probably would be good for safer drag racing.
MorganThread starterPCB, FL · Jul 7, 2009#61
Originally Posted by changchewsoon ↑
hurray for water/methanol injection!! 😁 😁
ehh needed a mildly relevant post to start this one with

so here is where my nozzle is, I remembered that I changed the angle on injector so that it was more level with the tubing - so here it is!
Picture not included in this copy

ps I hate my intake... but I'm stuck to some extent with an xA/xB throttle body location in a yaris... custom intake it is!
MorganThread starterPCB, FL · Jul 7, 2009#62
Summit Racing sells the aem for $399 USD and if you order early enough in the day they ship it out the day you place the order, but if you can find it that cheap locally, go for it! (Summit doesnt charge for shipping on anything over like $200... but local convenience is nice!)
MorganThread starterPCB, FL · Jul 8, 2009#63
yeah, I get spoiled by them cause stuff comes next day for free... your deal locally definitely seems to be pretty good
MorganThread starterPCB, FL · Jul 26, 2009#64
Installed a boost gauge for testing purposes and mine holds 8psi and spikes to 9.... with the belt slipping!
LtNoogieWest Hills, CA · Jul 26, 2009#65
Ok, I'm ordering mine this week. I'm sold on it. I read somewhere that you want max injection when boost first cuts in because the engine load is highest when you are switching from n/a to boosted operations and are undergoing the highest acceleration.

I'll try to find that link again
MorganThread starterPCB, FL · Jul 26, 2009#66
the water methanol kit I'm assuming?.... 🙂
LtNoogieWest Hills, CA · Jul 26, 2009#67
Yes. I'm waiting for a price quote from a local vendor. Otherwise, I'll go to Summit. Once the kit is installed, I'll schedule a dyno day.

Have you autox'd with your setup?
MorganThread starterPCB, FL · Jul 26, 2009#68
yeah get up on the dyno, I'm really trying to get something together in my area so I don't have to pay for time all by my lonesome - but this county is lame...

I have autox'd my car since the supercharger, but I feel like I'm almost slower than before. By that I mean, I was placing 1st-2nd in STS and I'm still faster than anything in STS but I jumped to SM and am finishing last-second to last 🙁 but that was to be expected.

I also added R-Comps (thanks Tamago!). Tires have COMPLETELY changed how I drive the car so adjusting to the extra power (I can actually use my brakes now, lol) and the R-Comps (no slippery driving) has been quite a shock to the system.

Overall, its a nice change but I do miss beating everyone with the stock engine... now they all justify me beating them because of the +30hp 🙄... obviously not because I'm a fairly decent driver
PETERPOOPOahu · Jul 26, 2009#69
i'm jealous. hawaii doesn't sell -20f windshield wiper fluid; nor do they ship it or boost juice to hawaii. wah wah
MorganThread starterPCB, FL · Jul 26, 2009#70
Picture not included in this copy

99.99% methanol 👍

but you may want to check an auto parts store, several of them close to me carry it in bulk - $5/gallon > $1.99/12oz
PETERPOOPOahu · Jul 26, 2009#71
yah i knew about that option, but wasn't very excited about it. i was more interested in the $1.?? option with the windshield wiper fluid.

How big was your tank for the AEM meth kit?

EDIT: I looked online and saw it comes with 1 gallon tank, or you can purchase the bigger 5 gallon tank. How long would a 1 gallon tank of meth/water mixture last? One full tank of gas? Longer? Shorter? Thanks.
MorganThread starterPCB, FL · Jul 26, 2009#72
Umm... well it depends on how you drive!

...and how much you drive. 😁

However, I deliver pizza and have it set to 25% and have my fun at work (legally and safely, of course!) and my 1 gallon tank [50/50 mix] lasts me a good couple of nights at work, so I'd guess maybe 400 miles (+/- 100 miles). The AEM kit has a progressive nozzle and you can set it to not spray as much, but mine is almost always spraying the max for the little injector.

To be quite honest, I've been out and about and made due with straight water. Its really not a noticeable difference and the whole kit is about safety not power for me right now. Either way, if you were less aggressive and had it set to 75% the 1 gallon would easily last 2 weeks ~ 600-700 miles.
PETERPOOPOahu · Jul 26, 2009#73
well i drive pretty conservatively and only manage about 300 miles if that on a full tank. so to know that the 1 gallon of meth/water can last atleast a tank of gas, that's comforting.

I was wondering about running just water in there too. Glad to know that's fine to do that. Same like you, my climate is very hot here. To have the insurance of knowing what the meth kit is doing, that is nice to know.
MorganThread starterPCB, FL · Jul 26, 2009#74
Whenever I run across a 'spare' $600 to rent the dyno I'll try to get some numbers up for water vs water/meth - til then I can only give you a rough guess, but I hope it helps :)
cali yarisCanoga Park, CA · Jul 27, 2009#75
$600 buys what? Are you talking about tuning time, or 3 pulls to see how you're doing?

just curious
PETERPOOPOahu · Jul 27, 2009#76
yah serious, because if it's $600 for three pulls with AFR.....OUCH!
TamagoOff Grid · Jul 27, 2009#77
Originally Posted by Morgan ↑
Whenever I run across a 'spare' $600 to rent the dyno I'll try to get some numbers up for water vs water/meth - til then I can only give you a rough guess, but I hope it helps :)
come down here, my shop is 1 block from where i dyno'd my car back in the day. cost me $35 iirc (dyno day though) i'm sure they'd do it for $60 for 3 pulls
MorganThread starterPCB, FL · Jul 27, 2009#78
Unless you have a 68 Stingray or any year Mustang they charge a ridiculous fee. One shop told me they have to "work on my car prior to dyno time" that they would still charge me for - sorry my car's not a pos that has to be tuned every year 🙄 it's really just Panama City being lame once again :/

Ps- I really just want to see where I'm at there's not anything to tune really, except concentrations but either way my curiosity is going to cost ... As it stands I'm trying to get a group of people to go so we can split a days rental fee
PETERPOOPOahu · Jul 27, 2009#79
wow. that is GAY
LtNoogieWest Hills, CA · Jul 27, 2009#80
I pay $95 for three pulls
MorganThread starterPCB, FL · Jul 27, 2009#81
The mustang dyno place was quite nice actually, but they still told me no... the other place insinuated that I was an idiot for supercharging such a inferior car, which was a lovely thing to hear on the receiving end. Oh well, maybe I can dig around the FL panhandle and try to find someone hosting a dyno day in the near future 🙂
LtNoogieWest Hills, CA · Jul 28, 2009#82
Have you looked into these guys? They use the Dynojet dyno which I have my car done on. They're in Ft. Walton Beach.

http://rpmperformance1.com/
MorganThread starterPCB, FL · Jul 28, 2009#83
yeah as of today I started checking around nearby places (Tallahassee/Ft. Walton/Pensacola) for dyno's

thanks for the link, I hadn't seen those guys yet
LtNoogieWest Hills, CA · Aug 6, 2009#84
My AEM water/meth injection kit arrived!👍

Now, I just need to find the time to install it.
LtNoogieWest Hills, CA · Aug 6, 2009#85
Originally Posted by echo_hrs ↑
Make sure to do a good DIY for this one, LtNoogie; I have my kit sitting in my garage ready to install when I feel up to it...😁

Cheers
Hmmm, I was waiting for yours. 🙂

My projects seem to take much longer and use more tools than most people's. Not that there's anything wrong with buying more tools.
kurokoma-kunmy own little world · Aug 6, 2009#86
Cool, good luck you guys! Happy tool collecting 😉
ParmasML · Aug 9, 2009#87
Seeing this thread makes me wonder on using water injection on my yaris..

Although I am not quite familiar how exactly works in terms of electronic connections. Morgan can you brief some points regarding wiring etc..
MorganThread starterPCB, FL · Aug 9, 2009#88
the wiring is fairly simple, power source for the pump, power source for the float switch (low mixture level sensor), power for the control box (allows you to adjust start psi and full psi), vacuum line to read pressure, ground and I think that was it - when we did the install, the water injection was pretty easy to wire in.

The hardest part was figuring out where to put the tank, the yaris has no good room up front and I just put mine on the back of the rear seat - I love having it there, its way easy to fill up, easy to check the level, hoses all conveniently tuck into the interior right hand side plastics and I've got quick connectors for the float switch and a shut off valve for the tank so I can take it out if needed...

If you can handle the blitz install, the aem is a piece of cake - and as of recently make a good port for a boost gauge 🙂
ParmasML · Aug 9, 2009#89
Thanks for the info will try to find one in the uk to save on shipping...

BTW nice clean setup you have there!
thebarberGrand Rapids, MI · Sep 18, 2009#90
have xa and yaris wiring diagrams i could take a look at?

where did you get the star board from?
MorganThread starterPCB, FL · Oct 14, 2009#91
Originally Posted by Parmas ↑
Thanks for the info will try to find one in the uk to save on shipping...

BTW nice clean setup you have there!
Thanks, it was a lot of work up front but it all paid off, do your prep work, solder all connections, take your time and you'll be fine

Originally Posted by thebarber ↑
have xa and yaris wiring diagrams i could take a look at?

where did you get the star board from?
blitz has directions for both set ups, and I just googled the xa info and garm has a set of the yaris ecu wiring (if he doesn't then etimago has a website where you can find it)

the starboard came from a local marine supply shop, you can find it online - I got the 3/4" stuff and still have some left after buying a 24"x36" piece

------------------------------

on a more recent addition to my car, here is a crappy video with interesting noises for all who are bored 🙂

Mobile, AL tunnel a few weeks ago
MorganThread starterPCB, FL · Feb 13, 2010#92
This kit is sold and I hope the next owner can dyno it to see what it can do. I have my car back to "normal" and am remembering the fun of a 106 hp. Can't wait to get back down to ST in autocross, for now I have some RComps to burn through so hello FSP 🙂