So lately ive been hearing alot of people catching flak for having rota's? Whats so wrong with Rota's. Is it the fact that they take famous wheels made by mugen or spoon or volk or other fancy JDM companies and produce a cheaper lightweight good looking copy? Hey that doesnt seem like such a bad idea to me....🤷 im all for saving money and looking good in the process...
Whats wrong with Rota's?
163 posts · 79,753 views · page 1 of 4
Replies 162
Cheaper lightweight copy, doesnt always mean that they are as strong as you need them to be.
People flak them mainly because they buy them, expect them to be as good as the regular rims. When they push them constantly for too long, too hard. They break. Hence why people hate Rotas.
I dont think that a Yaris can abuse a Rota into submission, at least in a track day. Maybe several seasons of autocross, then you might have a problem with cracking and possible breakage.
People flak them mainly because they buy them, expect them to be as good as the regular rims. When they push them constantly for too long, too hard. They break. Hence why people hate Rotas.
I dont think that a Yaris can abuse a Rota into submission, at least in a track day. Maybe several seasons of autocross, then you might have a problem with cracking and possible breakage.
Nothing is wrong with them, they are great wheels. Expensive lighter wheels break and bend just as easily as Rotas. Wheels dont just break for no reason. They break because you drive over or run into things.
There are only 3 qualities you can have in a wheel -
Light Strong Cheap
Pick 2 and live with your choice
There are only 3 qualities you can have in a wheel -
Light Strong Cheap
Pick 2 and live with your choice
Yea, I'm not trying to spend $800 on a set of wheels that there's a possibility can get bent due to potholes or curbrash. I'd rather spend 400-500 on "knockoffs". Then again, I'm not a performance guy, just a daily driver.
none...just some snubbish crowd who likes to own jahPANIS made wheels...don't mind rockin it anyday...
I dont think anyone could have put this better sir.Originally Posted by largeorangefont ↑Nothing is wrong with them, they are great wheels. Expensive lighter wheels break and bend just as easily as Rotas.
There are only 3 qualities you can have in a wheel -
Light, Strong, Cheap.
Pick 2.
I do autocross, and i see a loooaaaddd of peeps with them at the course, so rota must be doing something right...
ps. i hope i didnt start world war 19 on yaris world
I've wondered the same thing for the past couple weeks hearing all this talk about "wheel noobs and knockoffs"Originally Posted by mastaofdisasta ↑I dont think anyone could have put this better sir.
I do autocross, and i see a loooaaaddd of peeps with them at the course, so rota must be doing something right...
ps. i hope i didnt start world war 19 on yaris world
Rotas arent bad, mine have held up great over 1.5 years, but I have yet to hit the track with them, but plenty of spirited backroads driving.
I just think that people break them, dont realize the fact that they spent $500 on the whole set of rims. They want the quality of a $1500 set, thus would rather blame poor craftmanship.
I just think that people break them, dont realize the fact that they spent $500 on the whole set of rims. They want the quality of a $1500 set, thus would rather blame poor craftmanship.
true automotive enthusiasts would not say that, as true auto enthusiasts are few and far between...Then again, i guess their is always a fine obscure line between conniseur and asshole. To put it simply some peeps like me just cant afford the real thing, and i aint gonna lie, if i could afford em, id get volks, or be throwing on a set or mugen nr10's on my honda, but for now at this point in my life, i am much more than appreciative to be getting Rotas on my car in a few weeks. Much love Rota, one of the best things to come outta the Phillipines everOriginally Posted by Pitt Yaris ↑I've wondered the same thing for the past couple weeks hearing all this talk about "wheel noobs and knockoffs"
offtopic: thought it was manny "pacman" pacquiao.😁(sorry, could not resist)Originally Posted by mastaofdisasta ↑Much love Rota, one of the best things to come outta the Phillipines ever
I plan on purchasing a set of knock offs soon. Either rota or konig most likely.
One of the best posts correcting someone.Originally Posted by Malaya1221 ↑offtopic: thought it was manny "pacman" pacquiao.😁(sorry, could not resist)
If Rotas were "cool" JDM fanboys would have no reason to tout their $2500 wheels.
I don't see anything wrong with "fake" wheels, I'm on my second set of Konigs and have never had a problem. Don't get me wrong I would love to be able to AFFORD some forged high dollar wheels some day, but in the meantime until I win the lotto, I'll happily putt around on my cheapo "fake" wheels😁
none...just some snubbish crowd who likes to own jahPANIS made wheels...don't mind rockin it anyday...LOL, says the guy who just laid down some serious bank on REAL JDM Bride seats.
I run Rotas on both my road racing and street cars. I have never had a problem. If you looking to compete at a high end modified car show I wouldn't recommend them. But if your looking for a performance wheel and tire package for track use you and your planning on spending 3k on your wheels you should really give you head a shake. If its a street car then its even less of a issue IMO.
I had some cheap rims once. Drove over pothole and they broke. End of story.
i must have fell off if KONIGS are knockoff's now😆Originally Posted by Pitt Yaris ↑I plan on purchasing a set of knock offs soon. Either rota or konig most likely.
Nothing wrong with Rota wheels. I bought a set of Rota Circuit 8's for my Saturn back about 1999. Autocrossed them, street drove them, they saw ice, snow, road salt, etc. They went on my Miata for another 3 years of street, autocross and track use after I sold the Saturn and moved back to FL. Sold them to another Miata guy, he ran them for a few years, then sold them to another Miata guy... and I still see those wheels every time I go to one of the local Miata club meetings.
Rota is "cool" in same way that a freakin' Yaris is cool! It's not the highest performance option, but it is inexpensive, fairly light weight and gets the job done!
Rota is "cool" in same way that a freakin' Yaris is cool! It's not the highest performance option, but it is inexpensive, fairly light weight and gets the job done!
The reason why peeps hate Rotas are b/c there are a couple of vids out there showing the Rotas breaking completely off the hub . It turned out to be an isolated incident .
Rotas suck ass b/c they blatantly steal their designs from reputable manufactures to cater towards the individuals who want the "look" of expensive wheels but don't want the spend it (for whatever reason, viable or not).
I'd be 100% less pissed off at Rota if they actually designed their own shit, instead they steal from other companies to make a $$.
Although if Rota actually spent $$ designing wheels they wouldn't cost $70 a pop. :lol:
they have their place in our market b/c people love cheap knockoffs, doesn't make me "snobish" b/c I respect intellectual property.
My attitude goes towards all knock off companies not just Rota. Drag, Konig are two examples more popular on here.
Will your Rotas suddenly esprode while driving? no.
Look into wheel manufactures who are less expensive but still design their own shit, stop supporting the knock offs!!
/rant
:D
I'd be 100% less pissed off at Rota if they actually designed their own shit, instead they steal from other companies to make a $$.
Although if Rota actually spent $$ designing wheels they wouldn't cost $70 a pop. :lol:
they have their place in our market b/c people love cheap knockoffs, doesn't make me "snobish" b/c I respect intellectual property.
My attitude goes towards all knock off companies not just Rota. Drag, Konig are two examples more popular on here.
Will your Rotas suddenly esprode while driving? no.
Look into wheel manufactures who are less expensive but still design their own shit, stop supporting the knock offs!!
/rant
:D
Team Dynamics All THE WAY!
i love my rota circuit 8s...running thru shitty mass/ct/ny roads full of potholes on the highway makes me cringe, and they are TPMS friendly 👍 lol
sure there are some signs that visual quality isnt good, or very smooth (take close look at pic)...but its a solid wheel. i did have to take a hammer once or twice to fix a couple booboos, though. 😎
Picture not included in this copy
sure there are some signs that visual quality isnt good, or very smooth (take close look at pic)...but its a solid wheel. i did have to take a hammer once or twice to fix a couple booboos, though. 😎
Picture not included in this copy
or Enkei, or the Work Emotion Series or GramLightsOriginally Posted by Tamago ↑Team Dynamics All THE WAY!
:)
I can't speak for everyone else, but I didn't buy my Rotas because they were styled like another wheel. In fact, I didn't even realize that the Circuit 8 was a knock-off wheel when I bought it. I bought it because it was cheap, light and I didn't hate the way it looked.
As was said earlier in this thread: Cheap, Light, Strong... pick 3. With Rota, you're picking cheap and light.
And I don't buy the "stolen intellectual property" bit. I owned a set of actual Volk CE28N's after the Rota Circuit 8's. While the design is "similar", it is absolutely NOT the same. Rota simply made a wheel that had a similar appearance. It is designed BY ROTA to work with Rota's casting methods rather than Volks forging methods. Compare the "same" wheel in the same size, you'll find the Volk is about 2/3 the weight of the Rota. That's not magic! There's less aluminum in the Volk wheel to make it lighter, the strength is retained by careful design and the forging process. It would be impossible to "copy" that design and make a HEAVIER wheel... if Rota were to copy it and just cast it, they'd end up with a wheel that weighed about the same, but was VERY weak.
As was said earlier in this thread: Cheap, Light, Strong... pick 3. With Rota, you're picking cheap and light.
And I don't buy the "stolen intellectual property" bit. I owned a set of actual Volk CE28N's after the Rota Circuit 8's. While the design is "similar", it is absolutely NOT the same. Rota simply made a wheel that had a similar appearance. It is designed BY ROTA to work with Rota's casting methods rather than Volks forging methods. Compare the "same" wheel in the same size, you'll find the Volk is about 2/3 the weight of the Rota. That's not magic! There's less aluminum in the Volk wheel to make it lighter, the strength is retained by careful design and the forging process. It would be impossible to "copy" that design and make a HEAVIER wheel... if Rota were to copy it and just cast it, they'd end up with a wheel that weighed about the same, but was VERY weak.
the Circuit 8's are not CE28N knock offs. they are knock offs of a Mugen wheel.Originally Posted by Loren ↑I can't speak for everyone else, but I didn't buy my Rotas because they were styled like another wheel. In fact, I didn't even realize that the Circuit 8 was a knock-off wheel when I bought it. I bought it because it was cheap, light and I didn't hate the way it looked.
As was said earlier in this thread: Cheap, Light, Strong... pick 3. With Rota, you're picking cheap and light.
And I don't buy the "stolen intellectual property" bit. I owned a set of actual Volk CE28N's after the Rota Circuit 8's. While the design is "similar", it is absolutely NOT the same. Rota simply made a wheel that had a similar appearance. It is designed BY ROTA to work with Rota's casting methods rather than Volks forging methods. Compare the "same" wheel in the same size, you'll find the Volk is about 2/3 the weight of the Rota. That's not magic! There's less aluminum in the Volk wheel to make it lighter, the strength is retained by careful design and the forging process. It would be impossible to "copy" that design and make a HEAVIER wheel... if Rota were to copy it and just cast it, they'd end up with a wheel that weighed about the same, but was VERY weak.
Picture not included in this copy
🤣 you need to look more at the Rota "lineup"
they steal every wheel from someone else, if you don't think so you just aren't familiar with the wheel they stole it from haha.
If you'd like examples of this i'd be more than happy to give you them, but there is no way you can't "buy" the intellectual property bit b/c it's 100% true.
All the other arguments against Rota have been beaten like a deadhorse, Generally if I were to get into an accident I'd prefer the wheel to stay attached to the hoop.....🍻
alot of manufactures use "similar" designs but they make subtle changes to be able to call it their own. Rota takes these subtle changes and adds them to their wheels so they "Look" the same. haha.
sorry to say this, Russelltheirate, but he's right..Originally Posted by Loren ↑While the design is "similar", it is absolutely NOT the same. Rota simply made a wheel that had a similar appearance.
It would be impossible to "copy" that design and make a HEAVIER wheel...
if Rota were to copy it and just cast it, they'd end up with a wheel that weighed about the same, but was VERY weak.
Strange how similar the Mugen and the Rota are visually.....:vomit:
YES, visually..Originally Posted by Russelt3hPirate ↑Strange how similar the Mugen and the Rota are visually.....:vomit:
and the buck stops there.
i think that toyota could sue subaru for copying their front ends since 1996 (compare corolla to impreza) if we all lived by the "visual property is the same as intellectual property" rule..
so they add a little extra metal so the wheels don't explode, they sure as shit use the EXACT same visual design.Originally Posted by Tamago ↑sorry to say this, Russelltheirate, but he's right..
If you'd like I can go back and add the word "Visual" to all of my previous posts.
and Rota has had a few "issues" with wheels that were cast too "light" and they straight fell apart. 🤣
haha see, this proves the point of taking a design and making subtle changes.Originally Posted by Tamago ↑YES, visually..
and the buck stops there.
i think that toyota could sue subaru for copying their front ends since 1996 (compare corolla to impreza) if we all lived by the "visual property is the same as intellectual property" rule..
for example.
Advan RG2, and GramLight 57Maximum both basic 6 spokes with a bit of concave built into the shape.
but the RG2 has slightly skinnier spokes and doesn't have the (pain in the ass while cleaning) nipples on the hoop like the 57Maximum does.
:)
57maximums are for ricers anyway..Originally Posted by Russelt3hPirate ↑haha see, this proves the point of taking a design and making subtle changes.
for example.
Advan RG2, and GramLight 57Maximum both basic 6 spokes with a bit of concave built into the shape.
but the RG2 has slightly skinnier spokes and doesn't have the (pain in the ass while cleaning) nipples on the hoop like the 57Maximum does.
:)
hey now.Originally Posted by Tamago ↑57maximums are for ricers anyway..
Originally Posted by Russelt3hPirate ↑Rotas suck ass b/c they blatantly steal their designs from reputable manufactures to cater towards the individuals who want the "look" of expensive wheels but don't want the spend it (for whatever reason, viable or not).
I'd be 100% less pissed off at Rota if they actually designed their own shit, instead they steal from other companies to make a $$.
Although if Rota actually spent $$ designing wheels they wouldn't cost $70 a pop. :lol:
Look into wheel manufactures who are less expensive but still design their own shit, stop supporting the knock offs!!
/rant
:D
wow...so what you're saying is that u hate rota because they copy? a lot....actually most rims i see that are popular now are knockoffs of Eagle-alloy's wheels from the early 90's when people wanted something better for their mustangs and camaro's. just about any 5-star or 6-star, twist design or 3-star wheel is some sort of eagle design...
plus there's only so much you can do with a wheel....it's a freakin circle with cut out design on it...and there's only so much that will actually look good when it's all said and done. so if someone can do it cheaper than the factory and the high-end companies, i'll take it. they may not use t-6061 billet or run an extreme polish on it, but i can deal with that. and powdercoat will chip like paint, so i would rather have painted wheels so i can blast and re-coat them. also, some alloys can't be repaired, the cheaper wheels can be with simple welders and a guy who knows what hes' doing.
There are plenty of variations a company can do to make their wheels different.Originally Posted by severous01 ↑wow...so what you're saying is that u hate rota because they copy? a lot....actually most rims i see that are popular now are knockoffs of Eagle-alloy's wheels from the early 90's when people wanted something better for their mustangs and camaro's. just about any 5-star or 6-star, twist design or 3-star wheel is some sort of eagle design...
plus there's only so much you can do with a wheel....it's a freakin circle with cut out design on it...and there's only so much that will actually look good when it's all said and done. so if someone can do it cheaper than the factory and the high-end companies, i'll take it. they may not use t-6061 billet or run an extreme polish on it, but i can deal with that. and powdercoat will chip like paint, so i would rather have painted wheels so i can blast and re-coat them. also, some alloys can't be repaired, the cheaper wheels can be with simple welders and a guy who knows what hes' doing.
look at RPF1s and Kosei K1TS's
basic split six spoke with slight changes.
All I'm saying is Rota would have significantly less sales if they didn't steal their designs and therefore they'd be more expensive and the people who buy them b/c they are cheap wouldn't b/c they wouldn't be cheap anymore.
Nothing wrong with a wheel getting "inspiration" from another wheel, but an exact knock off? come on now, oh well. Nothing I can do. I was just answering the OP's initial question. 👍
All I'm saying is Rota would have significantly less sales if they didn't steal their designs and therefore they'd be more expensive and the people who buy them b/c they are cheap wouldn't b/c they wouldn't be cheap anymore.The way I see it, those overseas companies would make MORE money if they offered some middle-of-the-road choices. I'd love to rock some Volk's, but I'm not spending $400 a corner when I can get wheels for $100 a corner that work just fine.
Nike makes $45 shoes, you know. 😆
BUT you don't want to be seen with them on though.......😆Originally Posted by ChinoCharles ↑
Nike makes $45 shoes, you know. 😆
Why not? I'm usually left arguing that the people w/ the $200 ones are morons.
And I buy New Balances... and Konigs. 😆
And I buy New Balances... and Konigs. 😆
im DSW myself but rims are like sneakers its all about the brand name. buy some cheap knock off and throw the real deal center cap on it and its all good.....
ahaha, the wheels might as well match your fake rolex and oakleys too. 🤣 ;)Originally Posted by BLAZINBLUEVITZ ↑im DSW myself but rims are like sneakers its all about the brand name. buy some cheap knock off and throw the real deal center cap on it and its all good.....
nike = rotaOriginally Posted by ChinoCharles ↑Nike makes $45 shoes, you know. 😆
$100 a corner isn't middle road. ahaha.Originally Posted by ChinoCharles ↑The way I see it, those overseas companies would make MORE money if they offered some middle-of-the-road choices. I'd love to rock some Volk's, but I'm not spending $400 a corner when I can get wheels for $100 a corner that work just fine.
Nike makes $45 shoes, you know. 😆
what size wheel are you looking at getting? there are $250 a corner wheels from Rays, and there are PLENTY of non-knock offs out there that don't cost a testicle (or two...haha).
There was a set of gun blue wheels from either Volks or Rays that I would have LOVED to own, but the price was hilarious. +300 points if you can find what they are.
vsxx ?Originally Posted by ChinoCharles ↑There was a set of gun blue wheels from either Volks or Rays that I would have LOVED to own, but the price was hilarious. +300 points if you can find what they are.
The Gun Blue is a gramLight color. If you were looking at 16x7 4x100 then it was the 57Maximum.Originally Posted by ChinoCharles ↑There was a set of gun blue wheels from either Volks or Rays that I would have LOVED to own, but the price was hilarious. +300 points if you can find what they are.
It was either the 57Maximum or the 57Optimise.
If I had to guess I'd say 57Maximum simply b/c that's the one available to view on TireRack 🤣
57Maximum
Picture not included in this copy
57Optimise
Picture not included in this copy
that's a 3 Piece Work wheel, it is $$. :)Originally Posted by Tamago ↑vsxx ?
THE CANAL STREET watch yes but the oakley's went out in the late 90's....Originally Posted by Russelt3hPirate ↑ahaha, the wheels might as well match your fake rolex and oakleys too. 🤣 ;)
LV wallet then? 🤣Originally Posted by BLAZINBLUEVITZ ↑THE CANAL STREET watch yes but the oakley's went out in the late 90's....
It was the second, and no, I don't shop TireRack you ass. 😆 An old vendor here used to sell them. Needless to say he didn't last long.
How much are they?
How much are they?
Only reason I don't the opti is only 6.5" for 15 and 16. otherwise they are sweet.Originally Posted by ChinoCharles ↑It was the second, and no, I don't shop TireRack you ass. 😆 An old vendor here used to sell them. Needless to say he didn't last long.
How much are they?
I shot you a PM.
ordering these tonight, what are they a knockoff of????
Picture not included in this copy
Picture not included in this copy