regalOriginal postPA · Apr 30, 2009#1- Scion 15x6 alloys (perfect fit)
- TRD rear sway bar
- Tokico Blue Shocks
- TRD red Springs
- Champiro 328 summer performance 195-55-15
I am very happy with the look and the performance is outstanding, don't know why I had so many doubts, this thing handles better than my EG civic ever did.
One concern is at higher speeed bumps I get a knock at the top of the springs. I was unsure how far to tighten the top nuts on the end of the shock rods.
Picture not included in this copy
Replies 20
33OHDover, Ohio · Apr 30, 2009#2 Originally Posted by
regal ↑
I am very happy with the look and the performance is outstanding, don't know why I had so many doubts, this thing handles better than my EG civic ever did.
👏 I've been following a lot of your threads, very glad it came out to your liking!
regalThread starterPA · Apr 30, 2009#3This is the way the car should have come from the factory, the handling is extremely fast and responsive.
Russelt3hPirateEpcot · Apr 30, 2009#4did you tighten down the upper suspension bolt while the car was on the ground?
also check the wiper tray bolts, I had a nasty rattle since I forgot to tighten one back down 100%.
regalThread starterPA · Apr 30, 2009#5 Originally Posted by
Russelt3hPirate ↑ did you tighten down the upper suspension bolt while the car was on the ground?
also check the wiper tray bolts, I had a nasty rattle since I forgot to tighten one back down 100%.
No I did't tighten down the upper shock bolt with the wheels planted. I couldnt even find the wiper tray bolt, the\at is such a mickey mouse cowling.
Back to work on it tommorrow, but it handles so quickly it is mind blowing
Thanks for the suggestions.
33OHDover, Ohio · Apr 30, 2009#6May have asked you this before, but whereabouts in PA are you?
regalThread starterPA · Apr 30, 2009#7I am in SE PA about 1 hr north of baltimore
33OHDover, Ohio · Apr 30, 2009#8Ah okay, nevermind then. I'm close to the western border, by Pittsburgh.
marcustoronto, canada · Apr 30, 2009#9is kokico shocks same as tokico shock...
kngrsllSpartanburg, SC · Apr 30, 2009#10 Originally Posted by
marcus ↑ is kokico shocks same as tokico shock...
i have heard they are better while being quite a bit cheaper...
glad to hear it worked out well for you! the car looks great!
regalThread starterPA · Apr 30, 2009#11I noticed the top hat of the shock where it sticks up thru the firewall isn't flush, its lik there is nothing supoorting the shock rod at the top. Looks like I need to pull them and tightendown both nuts?
kngrsllSpartanburg, SC · Apr 30, 2009#12 Originally Posted by
regal ↑ I noticed the top hat of the shock where it sticks up thru the firewall isn't flush, its lik there is nothing supoorting the shock rod at the top. Looks like I need to pull them and tightendown both nuts?
a picture is worth a 1000 posts
PHXDEMONPhoenix, AZ · Apr 30, 2009#13 Originally Posted by
kngrsll ↑ i have heard they are better while being quite a bit cheaper...
glad to hear it worked out well for you! the car looks great!
😆🙄
kngrsllSpartanburg, SC · Apr 30, 2009#14 Originally Posted by
PHXDEMON ↑ 😆🙄
what?
AlexNet0Rockland, ME · Apr 30, 2009#15 Originally Posted by
regal ↑ I noticed the top hat of the shock where it sticks up thru the firewall isn't flush, its lik there is nothing supoorting the shock rod at the top. Looks like I need to pull them and tightendown both nuts?
I believe there was a thread on this where its a normal occurance on this car? I dunno, maybe someone else will chime in
anonymous userwindward oahu · May 1, 2009#16Regal,
Not to diss your choice of tires, but if you went with something else, (most anything performance), you may have seen a greater handling improvement.
regalThread starterPA · May 1, 2009#17Yea the tire were sold to me as summer performance tires, I really haven't had them lose grip so I dont think they are the limiting factor. If I can figure out the knock I'll be golden.
regalThread starterPA · May 1, 2009#18 Originally Posted by
marcus ↑ is kokico shocks same as tokico shock...
Yes my japanese is dyslexic
regalThread starterPA · May 1, 2009#19I tightened down the top nut, now more knocking. My cowling isn't back on right I am getting a weird wistle at higher speeds.
I would rate this job at 100% easier than changing springs/struts on a double wishbone civic. Toyota should have given better access to the front shock tower, I know we cam't be doing this by the book, I'll bet there is a lot more to remove that the wiper rack to get good access to the shock tower.
Russelt3hPirateEpcot · May 1, 2009#20 Originally Posted by
regal ↑ I tightened down the top nut, now more knocking. My cowling isn't back on right I am getting a weird wistle at higher speeds.
I would rate this job at 100% easier than changing springs/struts on a double wishbone civic. Toyota should have given better access to the front shock tower, I know we cam't be doing this by the book, I'll bet there is a lot more to remove that the wiper rack to get good access to the shock tower.
just take the whole panel off.
it's only 7 or 8 bolts (maybe 10), really easy to put back on too.
CtrlAltDefeatIndianapolis IN · May 2, 2009#21 Originally Posted by
regal ↑ I noticed the top hat of the shock where it sticks up thru the firewall isn't flush, its lik there is nothing supoorting the shock rod at the top. Looks like I need to pull them and tightendown both nuts?
well the gap is normal it's covered here as well...
Just finished DIY NF210 but have question about the gap .... I'm not sure about the sounds you mentioned.