Yarisworld Archive

Fog light help please

58 posts · 14,649 views · page 2 of 2

Replies continued

Liu997Thread starterHicksville, LI · May 9, 2009#51
yes, only when I turn the panel lights on and headlights
TreyzLong Island, NY · May 9, 2009#52
It's been so long that I don't even remember what I did lol ....

Don't be surprised if the lamps break on ya. Had it done twice before I finally ordered the Toyota OEM lamps.
CTScottUSA, CT · May 9, 2009#53
Originally Posted by Liu997 ↑
yes, only when I turn the panel lights on and headlights
Can you take a picture of the other side of the switch circuit board?
Liu997Thread starterHicksville, LI · May 10, 2009#54
How do I do that. It seems like I can't take out the board
CTScottUSA, CT · May 10, 2009#55
Originally Posted by Liu997 ↑
How do I do that. It seems like I can't take out the board
You have to snip the black blob of plastic to lift the board. I believe that the Switch LED is cooked from when the jumper was going to the wrong side of the resistor. That would have put 12 volts directly through the LED, which would kill it.
Liu997Thread starterHicksville, LI · May 10, 2009#56
ugh,..... whatever I give up anyway when I press it, the foglight on the Dash cluster turns on. Wait if you send 12 volts directly to an LED it frys it?
Damn I fried 20 dollars worth of lights 😠
CTScottUSA, CT · May 10, 2009#57
Originally Posted by Liu997 ↑
ugh,..... whatever I give up anyway when I press it, the foglight on the Dash cluster turns on. Wait if you send 12 volts directly to an LED it frys it?
Damn I fried 20 dollars worth of lights 😠
If the LED doesn't have a current limiting resistor it will light brightly once. Sometimes they'll even split or pop.
Liu997Thread starterHicksville, LI · May 10, 2009#58
Yea that's what happened to my led spot lights, I though it was 12v hardware but it lit once and I though the connection was bad... then used another one and that too fried ughh bad day.
😠 😢

And thanks for all the foglight help anyway