TamagoOriginal postOff Grid · Apr 25, 2009#1Picture not included in this copy
as far as i can tell, the downpipe is the only real "mechanical" issue.
yes, i realize there's not bling bling front mount intercooler, and i wager it'd be a waste of money.. a meth injection setup would easily replace the need for an intercooler and will help throttle response. (shorter piping = quicker spooling) and for $1000 less than a blitz, it's a no brainer..
more power, for less money?
😉
Replies 162
GideonSunnyvale, CA · Apr 25, 2009#2Well the management wouldn't work because of the ECU, although how different are the ECUs? Would putting the computer into a CEL coma to stop it from trying to adjust what the piggyback is doing work?
TamagoThread starterOff Grid · Apr 25, 2009#3 Originally Posted by
Gideon ↑ Well the management wouldn't work because of the ECU, although how different are the ECUs? Would putting the computer into a CEL coma to stop it from trying to adjust what the piggyback is doing work?
who KNOWS that the management wouldn't work?
GideonSunnyvale, CA · Apr 25, 2009#4This is true, although our ECU likes to learn and xB does not? That's enough of a difference if it's true I would think to mess up the piggyback. 🤷
TamagoThread starterOff Grid · Apr 25, 2009#5 Originally Posted by
Gideon ↑ This is true, although our ECU likes to learn and xB does not? That's enough of a difference if it's true I would think to mess up the piggyback. 🤷
no, xa/xb ecu's are re-learning ecus as well. a proper wiring job and volt clamping of the o2 sensor and/or MAF will easily trick the stock ECU into thinking it's seeing stoichiometric all the time, and will not fight your +/- piggyback tuning.
GideonSunnyvale, CA · Apr 25, 2009#6 Originally Posted by
Tamago ↑ no, xa/xb ecu's are re-learning ecus as well. a proper wiring job and volt clamping of the o2 sensor and/or MAF will easily trick the stock ECU into thinking it's seeing stoichiometric all the time, and will not fight your +/- piggyback tuning.
Oh. Well sweetness.
ChinoCharlesOH · Apr 25, 2009#7I'm throwing this out there... I heard through the grape vine that the overseas crowd is having success upgrading E-manage blues to the gold firmware and running a MAP sensor.
TamagoThread starterOff Grid · Apr 25, 2009#8in low boost applications i discovered that there was no reason for me to pull out timing.. by the time i was done with my FIC tune i'd put back all the timing i'd pulled out, and ended up netting 20whp by doing so. leave the cams alone, address fuel ONLY and you should be alright. injector control may be the best way to do this (this is why the FIC works very well in that aspect) but i'd suggest using the FIC as a fuel computer ONLY, don't even wire in the cam sensor stuff.. i believe strongly this is why Garm and others have had missfire problems. i dealt with some of those codes as well and found that by adjusting the "default" injector response time set up in the FIC, i was able to do away with the high RPM stuff.
seriously, if you haven't built an engine, you dont' want to exceed 10psi.. so you really shouldnt' be pulling out any timing. trust the stock knock sensor, maybe run meth injection or a big ass front mount intercooler.
TamagoThread starterOff Grid · Apr 25, 2009#9 Originally Posted by
ChinoCharles ↑ I'm throwing this out there... I heard through the grape vine that the overseas crowd is having success upgrading E-manage blues to the gold firmware and running a MAP sensor.
awesome news!
especially since emanage blues are garbage and therefore very cheap to source :D
ChinoCharlesOH · Apr 25, 2009#10... and I already have one. 🙂
I'm accepting donations, BTW. If everyone sent me a dollar maybe I could crack the case. 😆
TamagoThread starterOff Grid · Apr 25, 2009#11just use a hammer and chisel
ChinoCharlesOH · Apr 25, 2009#12LOL
at3GGVA Beach · Apr 27, 2009#13i'll send you $2 how about that? lol Who knows if this kit will work? It would be awesome, just kind of a big risk when nobody knows for sure?
saplaymateSATX · Apr 27, 2009#14 Originally Posted by
Tamago ↑ who KNOWS that the management wouldn't work?
Most here are so full of 🙄, theirs nothing special about are ECU, you can modify the signals and it will never "relearn" it self back to stock. whooppee777Maryland · Apr 27, 2009#15 Originally Posted by
ChinoCharles ↑ ... and I already have one. 🙂
I'm accepting donations, BTW. If everyone sent me a dollar maybe I could crack the case. 😆
that actually doesnt sound like a bad idea.
ChinoCharlesOH · Apr 27, 2009#16 Originally Posted by
saplaymate ↑ Most here are so full of 🙄, theirs nothing special about are ECU, you can modify the signals and it will never "relearn" it self back to stock.
Did you tune your car with a piggyback successfully?
at3GGVA Beach · Apr 27, 2009#17 Originally Posted by
saplaymate ↑ Most here are so full of 🙄, theirs nothing special about are ECU, you can modify the signals and it will never "relearn" it self back to stock.
yet all of US are uneducated....🤷
gwasabiHonolulu, Hawaii · Apr 27, 2009#18MAN!!!!!!!!!!! THIS WAS MY SECRET PLAN!!! AAAHHH!!!
Well since it's out there already. HKS Kainsai division makes a TurboCharger kit for the yaris. Yes you read correctly, YARIS! not XB or XA or other 1nzfe. It's a YARIS!
Good luck getting one though, Kansai doesn't ship out to US and the kit costs 7k.
gwasabiHonolulu, Hawaii · Apr 27, 2009#19 Originally Posted by
saplaymate ↑ Most here are so full of 🙄, theirs nothing special about are ECU, you can modify the signals and it will never "relearn" it self back to stock.
Its a misconception. it wont relearn back to stock. It'll learn around it though because it generally tries to keep everything running at a equal ratio and blah blah blah. I don't know crap about cars just my 2 cents lol.
TamagoThread starterOff Grid · Apr 27, 2009#20 Originally Posted by
gwasabi ↑ Its a misconception. it wont relearn back to stock. It'll learn around it though because it generally tries to keep everything running at a equal ratio and blah blah blah. I don't know crap about cars just my 2 cents lol.
so the BS is continued
gwasabiHonolulu, Hawaii · Apr 27, 2009#21lol dont know the right termsjust generally know what it does lol
TamagoThread starterOff Grid · Apr 27, 2009#22 Originally Posted by
gwasabi ↑ lol dont know the right termsjust generally know what it does lol
what does it do? besides "kinda changes stuff and blah blah"
Russelt3hPirateEpcot · Apr 27, 2009#23this is actually a really good idea.
<-- calling sister in Jaaapan.
<3 Yarisworld.
TamagoThread starterOff Grid · Apr 27, 2009#24 Originally Posted by
Russelt3hPirate ↑ this is actually a really good idea.
<-- calling sister in Jaaapan.
<3 Yarisworld.
kit is currently in stock in the YOU ESSSSS
Russelt3hPirateEpcot · Apr 27, 2009#25 Originally Posted by
Tamago ↑ kit is currently in stock in the YOU ESSSSS
i want the Yaris one. sheesh.
Russelt3hPirateEpcot · Apr 27, 2009#26I'd like to find pics of this installed.
if any one knows of any please post. (xB, xA, yaris what ever).
i'm off to look myself.
Nexus1155Dorchester · Apr 27, 2009#27What about this kit WON'T work for the Yaris.
Pessimism?
TamagoThread starterOff Grid · Apr 27, 2009#28 Originally Posted by
Nexus1155 ↑ What about this kit WON'T work for the Yaris.
Pessimism?
i was hoping someone could give a definitive answer.
because as far as i can see, it will work with mild modifications, and is a VERY high quality kit (none of that turbokits.com crap)
Russelt3hPirateEpcot · Apr 27, 2009#29who wants to draw this up in an engine bay for me?
gwasabiHonolulu, Hawaii · Apr 27, 2009#30I mean.....honestly You can take any XA or XB kit and Make it work with mild modification.
Greddy has a turbo kit out for the XB. So does HKS US.
and as far as an answer to tamago, like I said, I know zilch about cars. I said I "GENERALLY" know what it does. You don't really have to be so aggressive though. I mean it doesn't take much to act tough on the internet. Anyway I got no beef with you. just be nicer please :)
Russelt3hPirateEpcot · Apr 27, 2009#31 Originally Posted by
gwasabi ↑ I mean.....honestly You can take any XA or XB kit and Make it work with mild modification.
we know, tamago knows that from direct experience. taking his xA turbo kit and putting in a Yaris.
the question was which part of the above kit would cause the issues and need to be modified not "if" it could be.
either way, the argument for the "blah blah" is "why say it if you don't know or aren't willing to argue the point?"
gwasabiHonolulu, Hawaii · Apr 27, 2009#32oh well. I say it looks like only turbo manifold and the brackets to hold the peices in place needs to be modified. and also maybe hammer in the intake pipes here or there for clearance issues
well I just put it out there. my main point in that post was to say its a misconception that alot of people get when they say the ECU learns around the piggyback thinking it just goes back to stock.
TamagoThread starterOff Grid · Apr 27, 2009#33 Originally Posted by
gwasabi ↑ oh well. I say it looks like only turbo manifold and the brackets to hold the peices in place needs to be modified. and also maybe hammer in the intake pipes here or there for clearance issues
well I just put it out there. my main point in that post was to say its a misconception that alot of people get when they say the ECU learns around the piggyback thinking it just goes back to stock.
and yet you cannot explain how they work, you can just say that it's a misconception.. right..
and the only part physically that needs to be modified is the downpipe from the turbo to the exhaust. the manifold is just fine.
Russelt3hPirateEpcot · Apr 28, 2009#34anyone find pics?
the only thing that wont work is the downpipe wont meet up with the exhaust it needs extending an inch or two. you would be better off buying the zage tirbo kit for $1800 shipped.
1 attachment not included in this copy
TamagoThread starterOff Grid · Apr 28, 2009#36 Originally Posted by
kou ↑ the only thing that wont work is the downpipe wont meet up with the exhaust it needs extending an inch or two. you would be better off buying the zage tirbo kit for $1800 shipped.
HKS > Zage lol
i did some research on both it looks like zage makes the kit for HKS they may use there own hks turbo but everything else is outsourced. the first zage kit was a moddified hks xa/xb tubo kit.
Russelt3hPirateEpcot · Apr 28, 2009#38 Originally Posted by
kou ↑ i did some research on both it looks like zage makes the kit for HKS they may use there own hks turbo but everything else is outsourced. the first zage kit was a moddified hks xa/xb tubo kit.
wait a sec, if the first Zage kit was a modified HKS kit, then how does Zage make the HKS kit?
sounds like BS to me.
which one is kou?
why would a company not see what was needed to fit there turbo kit in a different model, they would modify the one they have first then make the parts needed.
Russelt3hPirateEpcot · Apr 28, 2009#40 Originally Posted by
kou ↑ why would a company not see what was needed to fit there turbo kit in a different model, they would modify the one they have first then make the parts needed.
I take it you didn't re-read your comment or mine.
so you're telling me Zage and HKS are the same in terms of this turbo kit?
the HKS kit was not designed/developed by HKS but by Zage?
Zage stamps the HKS oil pan for them, and doesn't include an intercooler?
I'm just trying to understand your contradictory statement.
Russelt3hPirateEpcot · Apr 28, 2009#41looks like Zage used all their good oil line tubing for the HKS order......
hks offers there own turbo and engine management for an xa/xb with there finished kit, zage developed the yaris kit from that kit, how hard is that to understand.everyone outsources.
Originally Posted by
Russelt3hPirate ↑ looks like Zage used all their good oil line tubing for the HKS order......
copyrights/patents on hks product?zage is not a small company i not think the wont to step on anybodys toes.
Russelt3hPirateEpcot · Apr 28, 2009#44 Originally Posted by
kou ↑ hks offers there own turbo and engine management for an xa/xb with there finished kit, zage developed the yaris kit from that kit, how hard is that to understand.everyone outsources.
it's hard to understand b/c you keep bouncing around.
first you said Zage made the HKS kit.
then you said Zage used the HKS kit for their Yaris kit.
now you're saying Zage stole the HKS kit design from the xA/xB and made some minor changes and are calling it their own.
so Zage isn't making the HKS kits, they just used an HKS kit as their initial setup for their new "Zage" Yaris kit.
or are you still saying Zage makes the HKS kits?
see where you're not making sense?
or do I need to add in your previous quotes?
Russelt3hPirateEpcot · Apr 28, 2009#45also please define the term "outsource".
if "EVERYONE" outsources, who makes the Zage kit? HKS? 🤣
AltitudeColorado · Apr 28, 2009#46^^^ Does this kind of shit keep you up at night? Seriously, you have way too much time on your hands.
Russelt3hPirateEpcot · Apr 28, 2009#47 Originally Posted by
Altitude ↑ ^^^ Does this kind of shit keep you up at night? Seriously, you have way too much time on your hands.
no, I sleep fine.
I just would prefer to know the truth whenever possible instead of some mindless regurgitation found somewhere on the internets.
does me asking questions keep you up at night? 🤷
I actually get paid by Yarisworld to keep the drama going.*
*the above comment is 100% false
cali yarisCanoga Park, CA · Apr 28, 2009#48 I actually get paid by Yarisworld to keep the drama going.
... and you're doing a great job with overly aggressive negativity and sarcasm.
The actual knowledge you have is pretty good, though. 👏
Russelt3hPirateEpcot · Apr 28, 2009#49 Originally Posted by
cali yaris ↑ ... and you're doing a great job with overly aggressive negativity and sarcasm.
The actual knowledge you have is pretty good, though. 👏
I'll try to be cuddly and lovey dovey for a few days and see if it helps, but from what I've witnessed before it takes short sentences to get the point across on a forum and that can misconstrued as aggressive and negative, then again if something is in the middle of a paragraph there is a very slim chance it'll get read especially if it is something worth reading. Thank you cali for your positive comments towards my knowledge. Cali, do you have any comments about this turbo kit in particular?
cali yarisCanoga Park, CA · Apr 28, 2009#50ok, I'll offer a few comments. The context for my comments is that someone buying this expects to more or less bolt it on and have a professional shop make adjustments, fabricate what's needed, tune and dyno the car.
1. What turbo is it? It's the heart of the kit, and I personally would only trust a name brand in my car to blow boost.
2. I like water lines and external wastegates, but that's not a critical point.
3. Management - I've always recommended finding a good shop with a dyno and someone who really knows how to tune cars before installing anything. Further, the tuner will have a preferred method/more knowledge on how to do it. Make sure they know how to tune the car with THIS management, including wiring, or you'll be wasting money on parts they can't use.
4. As noted, a downpipe will need to be fabricated. Again make sure the shop you are dealing with can do ALL of the work required to complete the project.
5. Intercooler and BOV -- Routing, choices, fabricating and installing will cost something, as will the purchase of a BOV.
The bottom line: It's an unknown turbo with quite a bit of work (in my opinion only!) to install correctly and unknown tuning strategy to make reliable power with a USDM car. I personally would lay out a plan, find a shop, source a mani, a turbo, and just build my own.