They do work, but if you want to spend over $1000 and getting it all wired up to work properly with stock ECU and sensors, lol then go for it
what about this kit would NOT work for the yaris?
163 posts · 34,136 views · page 3 of 4
Replies continued
Garm has a standalone that i believe is installed on his new setup. Not sure if it has been tuned successfully yet...
Hmm, this thread was entertaining... /popcorn
Just seems kinda interesting to me that a man can program the ECU for this car, yet across the globe probably several thousand engineers cant figure it out to crack it, and those who have tricked it, havnt shown any love to the US peeps.
Either the engineer who built the ECU for the Yaris is a freaking scholar beyond scholars, or just not from here (i.e. ALIEN)
Just seems kinda interesting to me that a man can program the ECU for this car, yet across the globe probably several thousand engineers cant figure it out to crack it, and those who have tricked it, havnt shown any love to the US peeps.
Either the engineer who built the ECU for the Yaris is a freaking scholar beyond scholars, or just not from here (i.e. ALIEN)
just rip out all the wiring and wire it all fresh. the stock sensors suck anyway.Originally Posted by Sabretooth ↑Hmm, this thread was entertaining... /popcorn
Just seems kinda interesting to me that a man can program the ECU for this car, yet across the globe probably several thousand engineers cant figure it out to crack it, and those who have tricked it, havnt shown any love to the US peeps.
Either the engineer who built the ECU for the Yaris is a freaking scholar beyond scholars, or just not from here (i.e. ALIEN)
Not to be a douche or anything Russel, do you do any of the work at all on your own cars other than changing the wheels..... what's your username on NASIOC
just rip out all the wiring and wire it all fresh. the stock sensors suck anyway.That's what I did. The EMS box is just back from AEM - they modified the internal wiring for VVTI. Hopefully this week it fires up - cross your fingers.
Garm, assuming it does work will we have the option of buying that unit prewired for the Yaris?
WRX8XB and T3h_clap on IWSTI. :)Originally Posted by Nexus1155 ↑Not to be a douche or anything Russel, do you do any of the work at all on your own cars other than changing the wheels..... what's your username on NASIOC
more about the STI here.
http://t3hclap.com/archives/40
My new goal in life is to get a pic of my Yaris with your stamp of approval. 🤣 😉
they are trash. all piggybacks are trash.Originally Posted by PETERPOOP ↑All the tuners on the island here say the AEM FIC is trash; same with emanage blue.
you'll need a ryank sized banner that says ROTA on it down the side of your car 🤘Originally Posted by ChinoCharles ↑My new goal in life is to get a pic of my Yaris with your stamp of approval. 🤣 😉
OMG burn. 😆Originally Posted by Tamago ↑you'll need a ryank sized banner that says ROTA on it down the side of your car 🤘
it can happen. :) I'm looking to do a feature on a few Yari. If anyone is interested.Originally Posted by ChinoCharles ↑My new goal in life is to get a pic of my Yaris with your stamp of approval. 🤣 😉
ahaha riiiiight.Originally Posted by Tamago ↑you'll need a ryank sized banner that says ROTA on it down the side of your car 🤘
Ughhhh surprisingly I am a member on both because i follow rally and ECU tuning. It seems like you're a big suspension nut?
suspension and wheels tech forums are where I generally "hang". What's your name on each?Originally Posted by Nexus1155 ↑Ughhhh surprisingly I am a member on both because i follow rally and ECU tuning. It seems like you're a big suspension nut?
Same as my name is on every forum lol Nexus1155. I don't post up just browse around
understandable.Originally Posted by Nexus1155 ↑I don't post up just browse around
Uh.. I run Ray's Foundry? Or do I not get the joke. 🤷Originally Posted by Tamago ↑you'll need a ryank sized banner that says ROTA on it down the side of your car 🤘
Originally Posted by ryank ↑Uh.. I'm in love with Garm? Or do I not get the joke. 🤷
🤷
Didn't realize there was anything wrong with someone paying and sending test parts to you to go to car shows with their name on your car. Last I heard it was quite popular in the car world, called a sponsorship? 🤷
the irony of the word MICRO being 3 feet tall is what makes me 😆Originally Posted by ryank ↑Didn't realize there was anything wrong with someone paying and sending test parts to you to go to car shows with their name on your car. Last I heard it was quite popular in the car world, called a sponsorship? 🤷
and the joke is actually pointed toward the fact that russellthepirate would NEVER put rotas on anything.. ;)
tell them about the time i painted rota ftw on your wing :D lmfao..
tell them about the time i painted rota ftw on your wing :D lmfao..
Uhh.. okay. The capital letters are 8" high.
this is not a decision you should be trying to rationalize with me. i have a panda on my hood lolOriginally Posted by ryank ↑Uhh.. okay. The capital letters are 8" high.
Abra-ka-pandamago!
No but seriously we need more viable turbo options under 2k then they would sell like hotcakes
No but seriously we need more viable turbo options under 2k then they would sell like hotcakes
My car has so many stickers it looks like a cheap bar skank. Its OK. 😆
🤣 troofOriginally Posted by Tamago ↑and the joke is actually pointed toward the fact that russellthepirate would NEVER put rotas on anything.. ;)
tell them about the time i painted rota ftw on your wing :D lmfao..
dude, not even a quality civic kit is that cheap..Originally Posted by Nexus1155 ↑Abra-ka-pandamago!
No but seriously we need more viable turbo options under 2k then they would sell like hotcakes
what if it was sans turbo/engine management?Originally Posted by Tamago ↑dude, not even a quality civic kit is that cheap..
🎉
that's possible i suppose.Originally Posted by Russelt3hPirate ↑what if it was sans turbo/engine management?
🎉
uhhhh without turbo won't work well. I mean you honestly could do a kit for under $2000 on the retail market and sell it for profit. It might cost you like $900 in parts with intercooler and no management and sell it for $1800... Not bad IMO, but i don't have super welder fab skills
obvious post is obvious.. lmfaoOriginally Posted by Nexus1155 ↑uhhhh without turbo won't work well.
Suppliers being xoRacing or something?Originally Posted by Nexus1155 ↑uhhhh without turbo won't work well. I mean you honestly could do a kit for under $2000 on the retail market and sell it for profit. It might cost you like $900 in parts with intercooler and no management and sell it for $1800... Not bad IMO, but i don't have super welder fab skills
you can make a cheap kit, doesn't mean it's good.
now, if you assembled one using used parts, it'd be feasible.
so Used Intercoolers (saab), used turbos (WRX?), new oil lines (nice ones), new manifold/piping/intake, new DP.
not sure if it'd be feasible for $900 cost if it was all new stuff.
also TMIC ftw. :)
sounds a lot like this:Originally Posted by Russelt3hPirate ↑Suppliers being xoRacing or something?
you can make a cheap kit, doesn't mean it's good.
now, if you assembled one using used parts, it'd be feasible.
so Used Intercoolers (saab), used turbos (WRX?), new oil lines (nice ones), new manifold/piping/intake, new DP.
not sure if it'd be feasible for $900 cost if it was all new stuff.
also TMIC ftw. :)
Picture not included in this copy
lol
wonder where I got my inspiration/cost figures......
we could probably throw in an oil cooler too...hmmm ;)
we could probably throw in an oil cooler too...hmmm ;)
$20!!!Originally Posted by Russelt3hPirate ↑wonder where I got my inspiration/cost figures......
we could probably throw in an oil cooler too...hmmm ;)
also TMIC ftw. :)Don't even f'in start with TMIC bs, you have a Subaru, and you obviously know they blow ass even at the expense of shorter piping...
they blow ass? (wont get into the TMIC vs FMIC for a subaru here, feel free to PM or start a thread on Nasioc/IWSTI and I'll chime in there).Originally Posted by Nexus1155 ↑Don't even f'in start with TMIC bs, you have a Subaru, and you obviously know they blow ass even at the expense of shorter piping...
reason I said it, is b/c it would be significantly cheaper to fabricate a setup that had a TMIC that was inside the engine bay.
less complexity in the piping, fitment, no cutting of the bumper or bumper beam. (just a hole in the hood.. 🤣 ).
when running a large turbo at high PSI I can see the requirements of an FMIC but at 8 psi a TMIC would be fine as long as it had proper flow.
obviously done correctly a nice V-mount setup would be ideal with the organization of the Yaris motor (just need to extend the maf).
either way, for $1800 I'd probably set it up sans intercooler and sell a water injection kit option. :)
oh yeah for a small engine like this and a V Mount, i mean its fine on something that produces little to no heat, but i meant as a solution for a performance vehicle that is going to be running over 20psi and the whole engine bay being roasting hot and the heatsoak deally. THATS when you are better off going FMIC. But recently they did research to find that the V Mounts have been working extraordinarily well since they get a nice volume of air targeted at the intercooler and still allowing it to hit the radiator as well...
But A TMIC would be fine with this little itty bitty.
But A TMIC would be fine with this little itty bitty.
I'd love to hack apart a Yaris and do a full on V-Mount with stepped cores but as you said it'd be a little pointless unless you already have a setup running 20 psi +Originally Posted by Nexus1155 ↑oh yeah for a small engine like this and a V Mount, i mean its fine on something that produces little to no heat, but i meant as a solution for a performance vehicle that is going to be running over 20psi and the whole engine bay being roasting hot and the heatsoak deally. THATS when you are better off going FMIC. But recently they did research to find that the V Mounts have been working extraordinarily well since they get a nice volume of air targeted at the intercooler and still allowing it to hit the radiator as well...
But A TMIC would be fine with this little itty bitty.
see the setup on Tamago's sig?
nice short piping, simple, (just need a hole in the hood)....haha
I don't know if a TMIC would clear the hood in a Yaris!
if it clears on an xA, it'll clear on euro NCAP yaris hoods.Originally Posted by ChinoCharles ↑I don't know if a TMIC would clear the hood in a Yaris!
mine worked perfectly.Originally Posted by Nexus1155 ↑Don't even f'in start with TMIC bs, you have a Subaru, and you obviously know they blow ass even at the expense of shorter piping...
I thought you guys had more room? Oh well, it doesn't matter. FMIC FTW. 🤷 😆
in the "boost response" war, i'd win, even with a larger VF39 turbo 😉😁Originally Posted by ChinoCharles ↑I thought you guys had more room? Oh well, it doesn't matter. FMIC FTW. 🤷 😆
I just like the wow factor of a FMIC. Go on, call me a ricer.
RICER!Originally Posted by ChinoCharles ↑I just like the wow factor of a FMIC. Go on, call me a ricer.
Hey, you've got a FUCKIN' PANDA ON YOUR HOOD! Your car should come with chopsticks! 🤣
it doesn't come with chopsticks, but it did come with fenders large enough to run wider than a 205 without rubbing constantly 😆😆😆Originally Posted by ChinoCharles ↑Hey, you've got a FUCKIN' PANDA ON YOUR HOOD! Your car should come with chopsticks! 🤣
I hate you. 🤣