33OHOriginal postDover, Ohio · Apr 24, 2009#1I hate the stock lower grill. I want to see what people have done, whether it be buying an aftermarket one, painting it, taking a saw to it.. etc. 😁
1 attachment not included in this copy
Replies 26
DarbPittsburgh, PA · Apr 24, 2009#2 Originally Posted by
ryank ↑ I hate the stock lower grill. I want to see what people have done, whether it be buying an aftermarket one, painting it, taking a saw to it.. etc. 😁
I could work some photoshop magic.
Though, I'm pretty sure you know how to 'shop, too. 😆
33OHThread starterDover, Ohio · Apr 24, 2009#3 Originally Posted by
Darb ↑ I could work some photoshop magic.
Though, I'm pretty sure you know how to 'shop, too. 😆
Yeah I do. I've photoshopped it a few ways. Just looking for more ideas on what's actually been done.
I'd love to saw it and throw some mesh in there, what I've done on a few of my previous cars. They just didn't cost 13K.
mrbondIllinois · Apr 24, 2009#4^ Garm's done it with his car. I'm planning on doing this as soon as I get my fog lights. I'll be sawing away the two horizontal bars, then using a bit of body filler on the newly-exposed openings, and then using some 1F8 touch up paint for those. As for the mesh, you can find it EVERYWHERE on ebay. I'll be getting some of that, cutting it to the appropriate size, and then either zip-tying it down or using epoxy. It looks really good on Garm's car, and I don't see why it shouldn't work for us as long as you take time and care.
cali yarisCanoga Park, CA · Apr 24, 2009#5I took out the bars, put in mesh to match the upper grill and PAINTED the inside edge black so it looks like a grill insert:
Picture not included in this copy
ChinoCharlesOH · Apr 24, 2009#6^^ That is what I will be doing very soon.
33OHThread starterDover, Ohio · Apr 24, 2009#7 Originally Posted by
cali yaris ↑ I took out the bars, put in mesh to match the upper grill and PAINTED the inside edge black so it looks like a grill insert:
Yep, there we go. That's what I need to do. Nice tip on the painting the inside black! 👍
Thanks Garm!
Pitt YarisPittsburgh · Apr 24, 2009#8I also want to do this. Where can one get high quality mesh and what can I expect to pay? I might even do something with the lower AND upper grill. Kinda wanna take out the stock upper grill and figure out a way to mount just mesh.
Basically like this, but also doing the lower to match....
Picture not included in this copy Everyone says hope depot etc, but I want something that's gonna be flimsy bend/break easily.
ChinoCharlesOH · Apr 24, 2009#9Go to
http://www.microimageonline.com and go to the store and find their grille insert for sedans. It comes w/ mesh and is a little more appealing than what you're suggesting, at least IMO.
Pitt YarisPittsburgh · Apr 24, 2009#10 Originally Posted by
ChinoCharles ↑ Go to
http://www.microimageonline.com and go to the store and find their grille insert for sedans. It comes w/ mesh and is a little more appealing than what you're suggesting, at least IMO.
I looked, I think he only had liftback inserts plus I don't wanna essentially pay over 100-120 bucks on a grill after having to get it painted.
BLAZINBLUEVITZNEW YORK · Apr 24, 2009#11that sedan looks like a photo chop.
cali yarisCanoga Park, CA · Apr 24, 2009#12I'm out of sedan mesh grills at the moment. They do look great though IMO
Pitt YarisPittsburgh · Apr 24, 2009#13 Originally Posted by
BLAZINBLUEVITZ ↑ that sedan looks like a photo chop.
It is, I'm not very good so it doesn't look super clean.
33OHThread starterDover, Ohio · Apr 24, 2009#14I love the one from MicroImage as well. I'm getting one of the Liftback mesh ones soon for my upper grill. Just have to do a custom lower grill because nobody makes one yet.
Picture not included in this copy
Pitt YarisPittsburgh · Apr 24, 2009#15I probably would end up getting the one off Garm if he had any, but since he doesn't I gotta do something else. A good thing about if this custom one fails, I still have the stock upper to put back in.
33OHThread starterDover, Ohio · Apr 24, 2009#16I'd see if he's getting any more, and just spraypaint it black. Then spraypaint a clear coat over it. That way, no expensive painting involved.
Pitt YarisPittsburgh · Apr 24, 2009#17True, it wouldn't look too bad. I guess one can of flint mica spray for 20 bucks might be able to do the job as well. Didn't he get them from Thailand? Also, if you plan on doing a custom lower grill we should get together one of these days so that way we can kill two birds with one stone, haha. I'm also real close to buying the nf210s as well.
33OHThread starterDover, Ohio · Apr 24, 2009#18 Originally Posted by
Pitt Yaris ↑ Didn't he get them from Thailand?
Most likely, lots of his stuff comes from Thailand. Shoot him a PM and see if he expects any soon. 😎
33OHThread starterDover, Ohio · Apr 24, 2009#19 Originally Posted by
Pitt Yaris ↑ True, it wouldn't look too bad. I guess one can of flint mica spray for 20 bucks might be able to do the job as well. Didn't he get them from Thailand? Also, if you plan on doing a custom lower grill we should get together one of these days so that way we can kill two birds with one stone, haha. I'm also real close to buying the nf210s as well.
I'm doing the grill tomorrow morning. Feel free to drive over here. 😁
Pitt YarisPittsburgh · Apr 24, 2009#20Lol, gotta say I wasn't expecting you to do it so soon. Gotta work a midnight shift tonight then gotta go over to Brookefield, Ohio tomorrow. Maybe here in a couple/few weeks I'll take the drive out that way. Also, where do you plan on getting the material?
33OHThread starterDover, Ohio · Apr 24, 2009#21I'm pretty sure I have some mesh left over from what I used before (on my old Civic), if not, I'll pick it up at Lowes.
Pitt YarisPittsburgh · Apr 24, 2009#22Well post pics of before/during/after if you remember. Be lookin forward to them.
33OHThread starterDover, Ohio · Apr 24, 2009#23I'll try. Kinda in a time bind, but I'll see what I can do. 👍
at3GGVA Beach · Apr 24, 2009#24I would really like to see a DIY for this...I dont like the lower either, but am very nervous about cutting anything....if youve got the time anyways. Good luck!
33OHThread starterDover, Ohio · Apr 27, 2009#25vios7Malaysia · Apr 27, 2009#26Pitt - just let u know. there are 2 types of after market mesh grill..refer pic below. the bigger smile u see on my pic here is TRD. 2 month ago..i almost buy..but after thinking properly, i think its not suit to my car..lol
also sample car from thailand using my eyelids(same-from team autosports) with trd mesh grill. 🎉
2 attachments not included in this copy
Pitt YarisPittsburgh · Apr 27, 2009#27 Originally Posted by
vios7 ↑ Pitt - just let u know. there are 2 types of after market mesh grill..refer pic below. the bigger smile u see on my pic here is TRD. 2 month ago..i almost buy..but after thinking properly, i think its not suit to my car..lol
also sample car from thailand using my eyelids(same-from team autosports) with trd mesh grill. 🎉
Awesome pic.