By popular demand, how to eliminate your stock, painted lower grill and add a mesh insert.
(Garm had given me the idea to do this. 👍)
What you will need:
Sawzall
Wire cutters
Black spraypaint (I used Satin Black)
Gutter Guard (mesh grill) - I bought mine from Lowe's. Came in a 5-pack for $9.
Steps:
Using the Sawzall, cut the front, painted rungs of the grill. Don't be precise here, leave some room to clean your cuts up.
Picture not included in this copy
Remove the ugly black grill that is behind, it's just clipped in.
Picture not included in this copy
Picture not included in this copy
Clean up your cuts, smooth against the bumper.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Use the stock black grill as your frame for the new mesh, cut around the outside.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Zip-tie the top of your mesh to the frame you made to hold it into place, and begin trimming it to fit the template.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Zip-tie all-around the finished product to hold it into place.
Picture not included in this copy
Picture not included in this copy
Mask your bumper to spray the rough edges with black that you cut.
Picture not included in this copy
Picture not included in this copy
Spray the inside edges with black.
Picture not included in this copy
Go ahead and paint your "grill assembly" black after you cut the extra length off the zip-ties.
Picture not included in this copy
Picture not included in this copy
Insert the grill assembly, clipping into it's stock location.
Picture not included in this copy
Picture not included in this copy
And you're done! Better pic of front to come soon, these are all cell phone pics. 😎
Picture not included in this copy
(Garm had given me the idea to do this. 👍)
What you will need:
Sawzall
Wire cutters
Black spraypaint (I used Satin Black)
Gutter Guard (mesh grill) - I bought mine from Lowe's. Came in a 5-pack for $9.
Steps:
Using the Sawzall, cut the front, painted rungs of the grill. Don't be precise here, leave some room to clean your cuts up.
Picture not included in this copy
Remove the ugly black grill that is behind, it's just clipped in.
Picture not included in this copy
Picture not included in this copy
Clean up your cuts, smooth against the bumper.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Use the stock black grill as your frame for the new mesh, cut around the outside.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Zip-tie the top of your mesh to the frame you made to hold it into place, and begin trimming it to fit the template.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Zip-tie all-around the finished product to hold it into place.
Picture not included in this copy
Picture not included in this copy
Mask your bumper to spray the rough edges with black that you cut.
Picture not included in this copy
Picture not included in this copy
Spray the inside edges with black.
Picture not included in this copy
Go ahead and paint your "grill assembly" black after you cut the extra length off the zip-ties.
Picture not included in this copy
Picture not included in this copy
Insert the grill assembly, clipping into it's stock location.
Picture not included in this copy
Picture not included in this copy
And you're done! Better pic of front to come soon, these are all cell phone pics. 😎
Picture not included in this copy