auto palOriginal postmanila, philippines · Apr 15, 2009#1i'd like to install LED lighting in the area under the dashboard. where do i tap the DC power for the lights so that they go on and off
when the doors are opened and closed?
thanks for any information you can share.
Replies 16
Liu997Hicksville, LI · Apr 15, 2009#2Yea I would also like to do this on my yaris. It would be nice to also have a switch for all of this.
enobmort42Denver, CO · Apr 15, 2009#3you can check this out for the wiring on the dome light and tap into that somewhere:
http://www.etimago.com/yaris/repairmanual/EWD.pdf ...what i did is, instead of tapping into the dome light, i have two systems: one turns on when the lights are on. for that, i used the wire that would have normally been for the automatic shifter light (i have a stick) for those. they light up the little cubby area under the climate control console. the other lights i have light up the foot areas in the front and the cup holders in the back, giving an all around illuminescence. those are switched and powered by a 12v constant in the fuse box behind the driver's side sunglass holder (see the pic, courtesy of CTScott. the red wire toward the bottom is where it should go. there are two terminals. the top one is the 12 volt constant).
hope this helps someone! 👍
auto palThread startermanila, philippines · Apr 15, 2009#4thanks for the information, enobmort42.
CreeperGeorgia · Apr 15, 2009#5i have my entire cabin light up, floorboards, airvents, compartments, under seats, under back seat, back floorboard. ill try and get some pictures if i can get my cam to take some decent ones. as for wireing i just wired from the batter with a inline fuse to a switch and then just wired the lights to the switch i have 3 switches in total inside outside and wheelwells. once you get the power in the cabin situated its easy as easy spread butter from there.
also have custom led lights in the glove boxes :)
Liu997Hicksville, LI · Apr 15, 2009#6 Originally Posted by
Creeper ↑ i have my entire cabin light up, floorboards, airvents, compartments, under seats, under back seat, back floorboard. ill try and get some pictures if i can get my cam to take some decent ones. as for wireing i just wired from the batter with a inline fuse to a switch and then just wired the lights to the switch i have 3 switches in total inside outside and wheelwells. once you get the power in the cabin situated its easy as easy spread butter from there.
also have custom led lights in the glove boxes :)
Would like to see pictures. 👍
CreeperGeorgia · Apr 15, 2009#7it glows like a red hot moon inside :)
CreeperGeorgia · Apr 15, 2009#8allthrough mine are all on switches and as to having them come on wehn the door opens i think enobmort42 has the right idea
CreeperGeorgia · Apr 15, 2009#9sorry for the short notice, low res, shacky, camera pictures. Ill try and get the real camera out sometime soon
the bright light reflection in the center vent on the 2nd picture is just my air-freshienr not the bulb

enobmort42Denver, CO · Apr 15, 2009#10wow, that's a lot of red! mine glows a nice blue... at least the lady in the wendy's drive thru window likes it... 👍
CreeperGeorgia · Apr 16, 2009#11yeah forgot to turn on the car but climate knobs and shifter are red as well. taco bell lady likes mine :)
Liu997Hicksville, LI · Apr 16, 2009#12thats nice, that prob what I want to do. Undecided with the color lol
auto palThread startermanila, philippines · Apr 16, 2009#13hi, creeper.
thanks for the photos. that's really red hot!
Pwr_DoriSydney, Australia · Jul 24, 2010#14the only thing that i light that i changed was the dome light to a 16 red led lol and im only thirteen
husaynkhanmauritius · Jul 27, 2010#15i also want to know where to plus the cable for the LED to light on when the doors open
CTScottUSA, CT · Jul 27, 2010#16husaynkhanmauritius · Aug 1, 2010#17thanks scott