Replies continued
CTScottThread starterUSA, CT · May 18, 2009#201 Originally Posted by
lammy29 ↑
The second one has this disclaimer:
"Please not if you are installing a stereo into a Japanese vehicle you will need the dearer din pocket kit as the standard width of a Japanese aperture is smaller than din size and the pocket has to fit from behind."
So, I think you need one which attaches to the brackets with screws, rather than a snap-in one.
lammy29Nottingham, UK · May 18, 2009#202 Originally Posted by
CTScott ↑ The part that this thread is about is the PZ489-B0330-00, which is one of the three Toyota parts that you need.
cool, just me making sure and wastin your time sorry!!
Originally Posted by
CTScott ↑ The second one has this disclaimer:
"Please not if you are installing a stereo into a Japanese vehicle you will need the dearer din pocket kit as the standard width of a Japanese aperture is smaller than din size and the pocket has to fit from behind."
So, I think you need one which attaches to the brackets with screws, rather than a snap-in one.
so would you say safest bet is the one you recommended first time?
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=350203320551 IsLNdbOiLas Vegas, NV · May 18, 2009#203CTScottThread starterUSA, CT · May 18, 2009#204CTScottThread starterUSA, CT · May 18, 2009#205 Originally Posted by
IsLNdbOi ↑
I am not sure if that would fit. It depends on if the door width is less than 174mm.
lammy29Nottingham, UK · May 18, 2009#206 Originally Posted by
CTScott ↑
once again🙇 ima go into my local dealer and see how much i can get the three parts for and hopefully they will have it!! i let you know how it goes. maybe pm you becus i used like a whole page in this thread
lammy29Nottingham, UK · May 19, 2009#207"Well the prices are similar, in order to actually supply you with something I will adjust the postage a bit laugh.gif
Total price inc delivery 107.42" managed to get the three parts for little bit cheaper after asking around was orginally £118. 😁 also ordered
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=260363938539 hopefully will be here for friday!!!!! i let you know how it goes!!!
🙇 once again Thanks! cant wait!!!! i think i might need adapter so it can fit the alpine system right?
CTScottThread starterUSA, CT · May 19, 2009#208 Originally Posted by
lammy29 ↑ "Well the prices are similar, in order to actually supply you with something I will adjust the postage a bit laugh.gif
Total price inc delivery 107.42" managed to get the three parts for little bit cheaper after asking around was orginally £118. 😁 also ordered
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=260363938539 hopefully will be here for friday!!!!! i let you know how it goes!!!
🙇 once again Thanks! cant wait!!!! i think i might need adapter so it can fit the alpine system right?
Yes, you need a wiring harness adapter:
http://cgi.ebay.co.uk/TOYOTA-YARIS-R...3286.m63.l1177 lammy29Nottingham, UK · May 19, 2009#209 Originally Posted by
CTScott ↑
cool i rang up halfords and prob pick up one later today or on friday
IsLNdbOiLas Vegas, NV · May 21, 2009#210 Originally Posted by
WeeYari ↑ Ground off the positioning pins on the HU mounting brackets. Was then able to position HU further back.
If possible, can you post pictures of your modified mounting brackets? Which of the positioning dimples did you grind off on each bracket?
So the new trim piece doesn't rest on the face frame of your head unit? If not, don't you see a gap / empty space around the face frame of your head unit (between the face frame and the trim piece)?
WeeYariGeorgetown, Ontario, Canada · May 21, 2009#211 Originally Posted by
IsLNdbOi ↑ If possible, can you post pictures of your modified mounting brackets? Which of the positioning dimples did you grind off on each bracket?
So the new trim piece doesn't rest on the face frame of your head unit? If not, don't you see a gap / empty space around the face frame of your head unit (between the face frame and the trim piece)?
I really don't feel like ripping everything apart again.
If possible, can you take and post up a picture of the side of your HU, as well as one of the mounting bracket. I will then use those to show you what I did.
The trim piece
does rest on the HU. When the trim reaches the point where it snaps into place, the back side of the opening just meets up with the 'flange' on the face frame.
CTScottThread starterUSA, CT · May 21, 2009#212 Originally Posted by
WeeYari ↑ I really don't feel like ripping everything apart again.
If possible, can you take and post up a picture of the side of your HU, as well as one of the mounting bracket. I will then use those to show you what I did.
The trim piece does rest on the HU. When the trim reaches the point where it snaps into place, the back side of the opening just meets up with the 'flange' on the face frame.
Here's a picture of the left bracket. You can see the six alignment bumps.
Picture not included in this copy1 attachment not included in this copy
WeeYariGeorgetown, Ontario, Canada · May 21, 2009#213Scott,
Can you give me two pictures of the bracket standing on its end as if it was in its mounted position. I would like one of both the inside, and outside of the bracket. It would be my intent to combine bracket photos, with one of the side of the HU so that I may draw arrows between the two to indicate re-alignment positioning.
Thanks.
CTScottThread starterUSA, CT · May 21, 2009#214 Originally Posted by
WeeYari ↑ Scott,
Can you give me two pictures of the bracket standing on its end as if it was in its mounted position. I would like one of both the inside, and outside of the bracket. It would be my intent to combine bracket photos, with one of the side of the HU so that I may draw arrows between the two to indicate re-alignment positioning.
Thanks.
Stock radio with bracket mounted:
Picture not included in this copy Both brackets viewed from front:
Picture not included in this copy Left Bracket:
Picture not included in this copy Right Bracket:
Picture not included in this copy4 attachments not included in this copy
pariahdecssMassachusetts · May 21, 2009#215I had to do this too, in my case I took a ball peen hammer and bashed down the alignment bumps, and then I slotted out the holes so that I could slide my HU further back so that it is almost flush with the new trim - slightly proud. It looks much better this way. It did take some back and forth to get it exactly how I wanted it, but damn it looks sweet.
WeeYariGeorgetown, Ontario, Canada · May 21, 2009#216This pic should work for now.
It may have been blind luck that I was able to achieve the exact amount of movement required for my JVC HU.
1 attachment not included in this copy
IsLNdbOiLas Vegas, NV · May 21, 2009#217Thanks guys. I'll give this a try when I get the new trim piece.
IsLNdbOiLas Vegas, NV · May 21, 2009#218 Originally Posted by
WeeYari ↑ This pic should work for now.
It may have been blind luck that I was able to achieve the exact amount of movement required for my JVC HU.
So the way you mounted it, the HU is attached to each bracket with only one screw?
WeeYariGeorgetown, Ontario, Canada · May 21, 2009#219 Originally Posted by
IsLNdbOi ↑ So the way you mounted it, the HU is attached to each bracket with only one screw?
No, 2 screws in each bracket.
AdriaanMontreal · May 21, 2009#220Received it two days ago but doesn't work with my two single din setup. The radio & the bottom cover pocket are 182mm. I could cut the plastic to get the radio to open but as in the picture, the bottom cover is wider so that wouldn't open. So now I may have to get rid off it, if i can't think of anything after the weekend its gone. I wanted one so badly and i can't use it now. Here a pic of my setup so if anyone else has the same the 180mm radio trim wouldn't work.
Picture not included in this copy
IsLNdbOiLas Vegas, NV · May 22, 2009#221Seems like none of the Pioner / Pioneer Premier head units fit properly in this double din trim piece. I wish Pioneer would create proper double / single din width head units.
MGarganoNJ · May 22, 2009#222It will fit if you trim the double DIN trim accordingly. I have the Pioneer AVH-P4000DVD which has the same weird face trim piece as yours and I made it work perfectly after a few trips back and forth to the garage to use the dremel tool.
IsLNdbOiLas Vegas, NV · May 22, 2009#223Trimmed mine as well. A little bit at a time. Had to trim so much to get my P8000BT to fit that by the time it was trimmed enough, you could see the jagged edges I "trimmed" using my dremel. I posted a picture earlier in this thread.
CTScottThread starterUSA, CT · May 22, 2009#224 Originally Posted by
Adriaan ↑ Received it two days ago but doesn't work with my two single din setup. The radio & the bottom cover pocket are 182mm. I could cut the plastic to get the radio to open but as in the picture, the bottom cover is wider so that wouldn't open. So now I may have to get rid off it, if i can't think of anything after the weekend its gone. I wanted one so badly and i can't use it now. Here a pic of my setup so if anyone else has the same the 180mm radio trim wouldn't work.
Picture not included in this copy
How about pushing the headunit in deeper, per WeeYari's instructions above? The HU should work that way. The question is if the door on the pocket will fit within the trim.
CTScottThread starterUSA, CT · May 22, 2009#225By the way, I have an extra set of brackets.
If someone doesn't have to tools, or doesn't understand the grinding process to move the HU deeper, so the trim piece will fit with wider HUs, I can modify the set that I have and ship it to you in exchange for your set.
AdriaanMontreal · May 22, 2009#226Still doesn't work due to the cover it the same size as the pionner unit. Because of pionner stupid din size i had to trim the double din metra brackets so it could fit. Guess i'm stuck with the 200mm opening. Unless i change the cover pocket to an open version. But then i'll have items out in the open which i don't like.
IsLNdbOiLas Vegas, NV · May 23, 2009#227 Originally Posted by
CTScott ↑ By the way, I have an extra set of brackets.
If someone doesn't have to tools, or doesn't understand the grinding process to move the HU deeper, so the trim piece will fit with wider HUs, I can modify the set that I have and ship it to you in exchange for your set.
How do you grind the positioning stubs? Will a dremel w/ a sanding head do it?
All I have to do is grind down all of the positioning stubs on the sides of the bracket that face the head unit, right?
WeeYariGeorgetown, Ontario, Canada · May 23, 2009#228 Originally Posted by
IsLNdbOi ↑ How do you grind the positioning stubs? Will a dremel w/ a sanding head do it?
All I have to do is grind down all of the positioning stubs on the sides of the bracket that face the head unit, right?
I used a file to remove the stubs. Dremel will work as well. The metal is very soft and easy to remove.
Yes, all you have to do is eliminate all 6 stubs on the HU side of the bracket.
Sodium DuckWestern Mass. · May 23, 2009#229I used one of those big spinning stone griding wheel things.
IsLNdbOiLas Vegas, NV · May 26, 2009#230Finally got it in. For my Pioneer I used my dremel to grind down all six of the positioning stubs. Then I moved the brackets forward until the top front hole was over the front-most screw hole for Toyota mounting points on the Pioneer HU. The top rear hole is now over the hole where the top rear positioning stub used to be.
In this mounting position, I use one of the original mounting bracket screws for the front hole and a short, self-tapping screw for the rear hole (the one that used to be for the positioning stub):
Picture not included in this copy
This is the best I could get it. The front bottom edge of the HU is flush / right up against the bottom edge of the new trim piece. The front top edge of the HU is further back so there's a small gap between that top edge of the HU and the top edge of the new trim piece. I'll have to cut the top edge of the stick on bezel that the Pioneer HU came with so I can stick that to the top edge of the front of the HU. Should take care of that gap.
With this new trim piece and the way I had to mount the HU, the HU now sits further back so it's more recessed. I like how this looks.
Picture not included in this copy
Picture not included in this copy
Scott, I still need another one of these trim pieces. One of my friends has asked me to install a new HU in his Yaris and he wants me to get one of these for him. Please keep me on the list for your next possible group buy.
808_YarisHI · May 26, 2009#231^nice pic. find your screw lol!
WeeYariGeorgetown, Ontario, Canada · May 26, 2009#232 Originally Posted by
IsLNdbOi ↑ Scott, I still need another one of these trim pieces. One of my friends has asked me to install a new HU in his Yaris and he wants me to get one of these for him. Please keep me on the list for your next possible group buy.
One is for sale here in Toronto.
For Sale True Double Din Radio Trim for Liftbacks (180mm opening) WeeYariGeorgetown, Ontario, Canada · May 26, 2009#233 Originally Posted by
IsLNdbOi ↑ This is the best I could get it. The front bottom edge of the HU is flush / right up against the bottom edge of the new trim piece. The front top edge of the HU is further back so there's a small gap between that top edge of the HU and the top edge of the new trim piece. I'll have to cut the top edge of the stick on bezel that the Pioneer HU came with so I can stick that to the top edge of the front of the HU. Should take care of that gap.
I have a small gap at the top of mine which I was able to minimize to nearly un-noticable.
There is a small amount of up/down movement of the HU that can be realized via the 4 screws securing it to the dash assembly. Holding the HU in place with the 4 screws slightly loose, try sliding it up and down. You should notice that you will be able to raise the HU about 1/16".
Give it a shot.
IsLNdbOiLas Vegas, NV · May 26, 2009#234I tried re-positioning the HU. Loosened the four screws holding the mounting brackets in then pushed up on the bottom of the HU to raise it as much as possible. While holding it up, I tightened the screws. Helped a little bit, but the gap was still very visible. So, I took that plastic trim pieces that comes with the HU and cut it up so all I had left was the piece that goes along the top edge of front of the HU.
Looks better now:
Picture not included in this copy
paulortphilippines,mindanao · Jul 5, 2009#235is it possible to ship it to philippines?
CTScottThread starterUSA, CT · Jul 6, 2009#236 Originally Posted by
paulort ↑ is it possible to ship it to philippines?
I'm all out of the ones from the group buy at this point. From the Philippines you would probably be able to order the part from a Toyota dealership in Australia (I believe that the Toyota Follow-me package is offered as an option there). If not, it's readily available from Europe.
anubisx99Natick, MA · Jul 6, 2009#237I have one up for grabs...US$55.00 shipped (US)...pm'd me if interested...
paulortphilippines,mindanao · Jul 6, 2009#238ah,okay.thanks for the info. :D
DED1982Georgia · Aug 2, 2009#239I can't believe I missed the group buy. I REALLY need this piece! Anyone want to sell me theirs, or start a new GB? Thanks in advance
Doug
CTScottThread starterUSA, CT · Aug 2, 2009#240 Originally Posted by
DED1982 ↑ I can't believe I missed the group buy. I REALLY need this piece! Anyone want to sell me theirs, or start a new GB? Thanks in advance
Doug
I am actually getting ready to do another European order, and I am going to grab a few more of these in the process.
DED1982Georgia · Aug 3, 2009#241Cool, well, count me in, I'll pay right away! What other pieces were you thinking about getting from over there? I love stuff like this!
Thanks in advance for all the work and planning you've done for the forum.
Doug
CTScottThread starterUSA, CT · Aug 3, 2009#242 Originally Posted by
DED1982 ↑ Cool, well, count me in, I'll pay right away! What other pieces were you thinking about getting from over there? I love stuff like this!
Thanks in advance for all the work and planning you've done for the forum.
Doug
There are a couple of people who are looking for the vertical trim pieces that would be required to use some of the Chinese HU's. Also, I am going to get a new set of center caps for my TTE wheels, and I am seriously considering getting a European RS front bumper for my 09.
uncleyarisToronto · Aug 5, 2009#243Post a thread of goodies available, I'm sure the GB sluts will poke interest!!!!!
Reeves360Olympia, WA · Aug 6, 2009#244 Originally Posted by
CTScott ↑ I'm all out of the ones from the group buy at this point. From the Philippines you would probably be able to order the part from a Toyota dealership in Australia (I believe that the Toyota Follow-me package is offered as an option there). If not, it's readily available from Europe.
I'm down for 1 as well. I'm planning on putting in a new stereo here soon.
I just want to double check that this will work for a 09 Yaris Sedan, correct?
CTScottThread starterUSA, CT · Aug 6, 2009#245 Originally Posted by
Reeves360 ↑ I'm down for 1 as well. I'm planning on putting in a new stereo here soon.
I just want to double check that this will work for a 09 Yaris Sedan, correct?
No. The sedan's radio trim is different than the LB's.
kudzu71Atlanta, GA · Aug 9, 2009#246 Originally Posted by
CTScott ↑ There are a couple of people who are looking for the vertical trim pieces that would be required to use some of the Chinese HU's. Also, I am going to get a new set of center caps for my TTE wheels, and I am seriously considering getting a European RS front bumper for my 09.
I'm interested in some of the vertical trim pieces. I've been holding off on the Chinese GPS unit until I read a review of it, but I can't find anyone who has one.
CTScottThread starterUSA, CT · Aug 9, 2009#247 Originally Posted by
kudzu71 ↑ I'm interested in some of the vertical trim pieces. I've been holding off on the Chinese GPS unit until I read a review of it, but I can't find anyone who has one.
There are a couple of other people who had inquired about those two pieces. They are about $90 plus shipping for the two from Europe.
eijikikimaruSo. CaL · Aug 9, 2009#248is there still going to be another gb for the true Double Din Radio Trim for Liftbacks (180mm opening)?
If not are there other ways of getting the Double Ding Radio Trim???
CTScottThread starterUSA, CT · Aug 9, 2009#249At some point within the next month I'll be putting one together.
DED1982Georgia · Aug 10, 2009#250Yep! I am so still in on this.. No more cruising Australian eBay looking for the FollowMe trim, which never comes up