Replies continued
IsLNdbOiLas Vegas, NV · May 13, 2009#151Ok, figured out why it won't work. My HU (a Pioneer FH-P8000BT) has a small "faceplate" around the front. It's permanently attached (cannot be removed) and this faceplate makes the sides of the unit a little larger than what this trim piece can slide through.
Do you take returns Scott?
Anyone interested in mine? I did manage to scratch it up a little when trying to get it on. There are three scratches on it now. Two are in spots that would be hidden anyway once a head unit is installed (the dark smudges on the the back corner in each pic.). The third is on the front right side of the trim piece.
Pics.:
Picture not included in this copy
Picture not included in this copy
WolfWingsKansas City, MO, USA · May 13, 2009#152If the HU faceplate has any trim that sticks out behind the 7" width of the chassis, even if it looks like it can never come off, it can. That head unit can be made 'chassis flush' all around, as seen from this rear-shot of the fully stripped chassis:
Picture not included in this copy
Or is this a matter of things not quite fitting just in the corners? Have you tried sliding the head unit into the trim, instead of the trim over the head unit?
IsLNdbOiLas Vegas, NV · May 13, 2009#153I tried sliding the HU through the front and the back and it wouldn't fit. It's not just the corners. As I mentioned above, the FH-P8000BT has a faceplate permanently attached to it that can't be removed. I took the entire thing out and it does have screws to remove the entire front of the unit. When you do that, you find that the parts circled in red are permanently attached / molded into / is one piece w/ the entire front of the head unit.
I've circled it in red here:
Picture not included in this copy
MGarganoNJ · May 13, 2009#154 Originally Posted by
IsLNdbOi ↑ I tried sliding the HU through the front and the back and it wouldn't fit. It's not just the corners. As I mentioned above, the FH-P8000BT has a faceplate permanently attached to it that can't be removed. I took the entire thing out and it does have screws to remove the entire front of the unit. When you do that, you find that the parts circled in red are permanently attached / molded into / is one piece w/ the entire front of the head unit.
I've circled it in red here:
Picture not included in this copy
I had the same problem with the new dash trim and a Pioneer AVH-P4000DVD. My head unit has that non-removable trim piece around it as well. Just use a dremel tool/sand paper/file to trim the plastic dash trim until it fits. Took me about 30 minutes but finally I got it to snap into place and it looks awesome. Don't give up because it can be done with a little patience. The pieces you file/sand cannot be seen once the dash trim is in place, so don't worry about that.
CTScottThread starterUSA, CT · May 13, 2009#155 Originally Posted by
IsLNdbOi ↑ I tried sliding the HU through the front and the back and it wouldn't fit. It's not just the corners. As I mentioned above, the FH-P8000BT has a faceplate permanently attached to it that can't be removed. I took the entire thing out and it does have screws to remove the entire front of the unit. When you do that, you find that the parts circled in red are permanently attached / molded into / is one piece w/ the entire front of the head unit.
I've circled it in red here:
In doing some searching, I see mention of it being common to have to trim to fit the FH-P8000BT. I couldn't find actual dimensions for that ring. Usually the installation manual has the detailed dimensions, but not for that Pioneer.
CTScottThread starterUSA, CT · May 13, 2009#156 Originally Posted by
lammy29 ↑ Picture not included in this copy
my yaris from uk will it fit? i would be interested but will you ship to uk??
To use it with your Yaris, you would also have to replace the outer vertical trim pieces that have the cut-outs for the radio controls. You would need:
PZ489-B0330-00 (The silver trim piece)
55436-52010-B0 and 55435-52010-B0 (The left and right vertical trim pieces)
You may be able to get the parts directly from your Toyota dealer, since they originate from Europe. If not, it would probably be much more cost effective for you to go directly through "Danish Yaris", as shipping from Denmark to the UK would be more reasonable.
Danish YarisCopenhagen, Denmark · May 13, 2009#157Hi
I´m happy to hear all likes the trims.
If Scott wants and there is enough, I sure will help you with more radiopanels.
Lammy29: If you can´t get the part numbers that Scott wrote to you, I can ship it directly to you, no problem.
Regards Steven.
JosephDocCA, USA · May 13, 2009#158So I swap mine last night.
I have a Kenwood-8120 and I had to shave off the inner side for about 15mm to make it fit. I guess for some bigger HUs like mine, there will be some modification work needed.
It tooK me 1.5 hours but I am still happy!!!
Thansk Scott and Steven
-------------
Yup, I did it with a dremel.
IsLNdbOiLas Vegas, NV · May 13, 2009#159 Originally Posted by
MGargano ↑ I had the same problem with the new dash trim and a Pioneer AVH-P4000DVD. My head unit has that non-removable trim piece around it as well. Just use a dremel tool/sand paper/file to trim the plastic dash trim until it fits. Took me about 30 minutes but finally I got it to snap into place and it looks awesome. Don't give up because it can be done with a little patience. The pieces you file/sand cannot be seen once the dash trim is in place, so don't worry about that.
Wait so what did you have to file? The parts of the HU I circled in red or the trim piece from Scott? If it was the trim piece from Scott, what part of it did you file?
Originally Posted by
CTScott ↑ In doing some searching, I see mention of it being common to have to trim to fit the FH-P8000BT. I couldn't find actual dimensions for that ring. Usually the installation manual has the detailed dimensions, but not for that Pioneer.
Scott, add me to the list (if you have one) for the next group buy. I'd like another one of these since I damaged the first one. The damages could be easily fixed by sanding and repainting, but I don't have the time or skills for that.
CTScottThread starterUSA, CT · May 13, 2009#160 Originally Posted by
IsLNdbOi ↑ Wait so what did you have to file? The parts of the HU I circled in red or the trim piece from Scott? If it was the trim piece from Scott, what part of it did you file?
Scott, add me to the list (if you have one) for the next group buy. I'd like another one of these since I damaged the first one. The damages could be easily fixed by sanding and repainting, but I don't have the time or skills for that.
OK - I'll add you to the list. Looking at your pictures, I think that what you will need to trim is the scratched area, so you may be OK, other than the scratch on the outer part of the right side.
Can you pop off the existing trim and take a picture with the new trim aligned, so we can see how much trimming needs to happen for your HU?
Looking at peoples' responses thus far, it looks like Pioneer and Kenwood units have required some amount of modification to fit. Eclipse HUs seem to fit without a problem. As people install theirs, please post your HU make/model and experience with the installation, and I'll start compiling the data on the first page of the thread, so we'll know what works out of the box, and what requires modification to work.
pariahdecssMassachusetts · May 13, 2009#161Yes my HU is a Kenwood DNX7120 and I had to trim the new trim piece (not the headunit) about 10mm on the back lip to make it fit - for those that are really picky the color of the new piece for my '09 LB is not a 100% match against the center AC/Air center gauge cluster trim but I am fine with that. The new trim piece is lighter than the slightly darker/smokier USDM center gauge panel.
. . . but it still looks hella better than the Metra® gap filler crap kit
CTScottThread starterUSA, CT · May 13, 2009#162I just popped mine off to take some measurements. My Eclipse AVN2210p (which is actually the radio that Toyota made this piece because of) has a wider trim ring, which is about 1" in from the face. You can see it in the picture below. The wider ring is 179mm x 97mm. The narrower section is 170mm x 94mm.
Picture not included in this copy
The new trim piece's opening is 174mm x 100mm (6 7/8" x 3 15/16"). This is 6mm narrower than Double DIN spec, which probably explains why some HU's fit without a problem and others don't.
Also, the lip of the new trim piece extends 10mm deeper than the original did (see the pic below).
Picture not included in this copy
IsLNdbOiLas Vegas, NV · May 13, 2009#163Thanks Scott. Keep me on the list. I'll try taking pics. later. I just find it a PITA to remove the trim pieces and panels to take the HU out.
CTScottThread starterUSA, CT · May 13, 2009#164 Originally Posted by
IsLNdbOi ↑ Thanks Scott. Keep me on the list. I'll try taking pics. later. I just find it a PITA to remove the trim pieces and panels to take the HU out.
Grab the vertical trim pieces low, on the outside (by the storage pockets) and pull outward. They come off much easier from bottom to top.
enviriCT · May 13, 2009#165scott add me to the list too, its time for me to start getting a system.
WeeYariGeorgetown, Ontario, Canada · May 13, 2009#166It has arrived in Canada!
Will try to install tomorrow night. HU will be JVC.
IsLNdbOiLas Vegas, NV · May 14, 2009#167I tried trimming all around the back of the trim piece. Trimmed all the way to the line on the surface where you can see where the plastic was "joined" together.
Still no go. This is the best pic. I could take of it.
It's like this on both sides:
Picture not included in this copy
I do plan on getting the new version of the P8000BT later this year. They've released new versions of most of their 2008 models already. Hopefully, they don't add the stupid faceplate on the new model.
I do still want another of these DD trim pieces Scott so keep me on the list.
CTScottThread starterUSA, CT · May 14, 2009#168 Originally Posted by
IsLNdbOi ↑ I tried trimming all around the back of the trim piece. Trimmed all the way to the line on the surface where you can see where the plastic was "joined" together.
Still no go. This is the best pic. I could take of it.
It's like this on both sides:
I do plan on getting the new version of the P8000BT later this year. They've released new versions of most of their 2008 models already. Hopefully, they don't add the stupid faceplate on the new model.
I do still want another of these DD trim pieces Scott so keep me on the list.
If I understand correctly, you're trimming the lip of the trim piece to make it less deep? If that is the case, how close is it depth-wise from the trim piece being able to snap on? Also, if you were able to move the HU in deeper (by re-drilling the bracket mounting holes), would that help?
Danish YarisCopenhagen, Denmark · May 14, 2009#169 Originally Posted by
pariahdecss ↑ Yes my HU is a Kenwood DNX7120 and I had to trim the new trim piece (not the headunit) about 10mm on the back lip to make it fit - for those that are really picky the color of the new piece for my '09 LB is not a 100% match against the center AC/Air center gauge cluster trim but I am fine with that. The new trim piece is lighter than the slightly darker/smokier USDM center gauge panel.
. . . but it still looks hella better than the Metra® gap filler crap kit
Hi
That´s because the radiopanel is made for the non faceliftet model which is a lighter silver in color.
Regards Steven.
IsLNdbOiLas Vegas, NV · May 14, 2009#170 Originally Posted by
CTScott ↑ If I understand correctly, you're trimming the lip of the trim piece to make it less deep?
Yes, I thought that's what everyone was telling me to try in the previous posts in this thread. It doesn't look very nice though. You can see in the picture that the trimmed lip can be seen.
Originally Posted by
CTScott ↑ If that is the case, how close is it depth-wise from the trim piece being able to snap on? Also, if you were able to move the HU in deeper (by re-drilling the bracket mounting holes), would that help?
Not sure how close it is to being able to snap on. Didn't take that measurement. I don't think moving the HU in deeper would help. The problem is the attached ring / faceplate on the front of the HU.
WeeYariGeorgetown, Ontario, Canada · May 14, 2009#171SHIT!!
It's not going to work without some jigging. Going to have to shave about a quarter of an inch off of the sides of the HU opening in the trim panel.
CTScottThread starterUSA, CT · May 14, 2009#172 Originally Posted by
WeeYari ↑ SHIT!!
It's not going to work without some jigging. Going to have to shave about a quarter of an inch off of the sides of the HU opening in the trim panel.
What HU do you have?
WeeYariGeorgetown, Ontario, Canada · May 14, 2009#173 Originally Posted by
CTScott ↑ What HU do you have?
JVC
1 attachment not included in this copy
CTScottThread starterUSA, CT · May 14, 2009#174 Originally Posted by
WeeYari ↑ JVC
Looking at an unmounted picture of your KW-XG700, it has a similar lip to IsLNdbOi's Pioneer. Does the narrower part beyond that lip fit through the opening, or is that the area that needs to be trimmed for?
IsLNdbOiLas Vegas, NV · May 15, 2009#175The manual for the P8000BT shows this for the dimensions:
Dimensions (W × H × D):
D
Chassis ..................... 178 mm × 100 mm × 160 mm
(7 in.× 3-7/8 in.× 6-1/4 in.)
Nose ........................... 170 mm × 94 mm × 8 mm
(6-3/4 in.× 3-3/4 in.× 3/8 in.)
I couldn't get the P8000BT in even through the front of the new trim piece.
WeeYariGeorgetown, Ontario, Canada · May 15, 2009#176Ground off the positioning pins on the HU mounting brackets. Was then able to position HU further back.
1 attachment not included in this copy
IsLNdbOiLas Vegas, NV · May 17, 2009#177So after grinding the pins off and mounting the HU further back, does any part of the HU even touch the new 180mm DD trim piece?
WeeYariGeorgetown, Ontario, Canada · May 17, 2009#178 Originally Posted by
IsLNdbOi ↑ So after grinding the pins off and mounting the HU further back, does any part of the HU even touch the new 180mm DD trim piece?
The face frame of the HU measured 178mm, with an extended nose at 170mm.
By repositioning the HU, the trim now 'rests' on the 178mm portion of the face frame. There is no contract being made on the inside of the trim piece opening.
CTScottThread starterUSA, CT · May 17, 2009#179I still haven't gotten a reply from PMs to: ozmdd, yrsdrgn, hwnstyle21, or Syroyizhka.
Please let me know ASAP if you are still interested. I would like the get the last of these shipped this week. If I don't hear from you by mid-week, I'm going to go ahead and move them to the next people on the waiting list.
IsLNdbOiLas Vegas, NV · May 17, 2009#180How many people do you have on the waiting list? Are there enough on the list for the next group buy?
CTScottThread starterUSA, CT · May 17, 2009#181 Originally Posted by
IsLNdbOi ↑ How many people do you have on the waiting list? Are there enough on the list for the next group buy?
Thus far, six on the waiting list, and 5 sales still pending.
lammy29Nottingham, UK · May 17, 2009#182 Originally Posted by
CTScott ↑ To use it with your Yaris, you would also have to replace the outer vertical trim pieces that have the cut-outs for the radio controls. You would need:
PZ489-B0330-00 (The silver trim piece)
55436-52010-B0 and 55435-52010-B0 (The left and right vertical trim pieces)
You may be able to get the parts directly from your Toyota dealer, since they originate from Europe. If not, it would probably be much more cost effective for you to go directly through "Danish Yaris", as shipping from Denmark to the UK would be more reasonable.
thanks also would this item form ebay fit the item ya selling?
http://cgi.ebay.co.uk/ws/eBayISAPI.d...%3DI%26otn%3D2 i have a alpine cda-9855
Picture not included in this copy CTScottThread starterUSA, CT · May 17, 2009#183 Originally Posted by
lammy29 ↑
No. That is made to reduce the opening for the OEM one that comes on our cars here. It lets you mount a single DIN radio in the OEM opening. With the trim we have purchased to mount a single DIN radio you would just have to use the pocket to fill the space below the radio.
lammy29Nottingham, UK · May 17, 2009#184 Originally Posted by
CTScott ↑ No. That is made to reduce the opening for the OEM one that comes on our cars here. It lets you mount a single DIN radio in the OEM opening. With the trim we have purchased to mount a single DIN radio you would just have to use the pocket to fill the space below the radio.
so if i purchased the thing you are selling it would end up looking like the pic below??
Picture not included in this copy CTScottThread starterUSA, CT · May 17, 2009#185 Originally Posted by
lammy29 ↑ so if i purchased the thing you are selling it would end up looking like the pic below??
No. It would not have the black filler on the sides - The silver would meet the sides of the radio face.
lammy29Nottingham, UK · May 18, 2009#186 Originally Posted by
CTScott ↑ No. It would not have the black filler on the sides - The silver would meet the sides of the radio face.
does that mean i can just put my system straight in, or wont fit.😕 lol sorry being akward and asking like a milli questions. what about the the bottom bit will there jus be a gap?
CTScottThread starterUSA, CT · May 18, 2009#187 Originally Posted by
lammy29 ↑ does that mean i can just put my system straight in, or wont fit.😕 lol sorry being akward and asking like a milli questions. what about the the bottom bit will there jus be a gap?
No problem. Your radio should fit, but would have an opening below it, since it is half of the height of the opening. You would then fill the opening with a single DIN filler, like the pocket shown below:
Picture not included in this copy ImportRacer88Meshoppen, Pa 18630 · May 18, 2009#188do they have any for the sedans
CTScottThread starterUSA, CT · May 18, 2009#189 Originally Posted by
ImportRacer88 ↑ do they have any for the sedans
No - Not that I've been able to find.
ozmddDFW, TX · May 18, 2009#190pm sent
lammy29Nottingham, UK · May 18, 2009#191 Originally Posted by
CTScott ↑ No problem. Your radio should fit, but would have an opening below it, since it is half of the height of the opening. You would then fill the opening with a single DIN filler, like the pocket shown below:
Picture not included in this copy
do you know where i can get that from?
Danish YarisCopenhagen, Denmark · May 18, 2009#192Hi
I´m not sure, but maybe you can use the original Toyota one.
Regards Steven.
CTScottThread starterUSA, CT · May 18, 2009#193lammy29Nottingham, UK · May 18, 2009#194 Originally Posted by
CTScott ↑
sweet your awesome!!🙇
so i need:
PZ489-B0330-00
55436-52010-B0
55435-52010-B0
and the ebay item and i will able to fit my alpine system in?????
CTScottThread starterUSA, CT · May 18, 2009#195 Originally Posted by
lammy29 ↑ sweet your awesome!!🙇
so i need:
PZ489-B0330-00
55436-52010-B0
55435-52010-B0
and the ebay item and i will able to fit my alpine system in?????
Correct. You may have to be a bit creative to mount the alpine HU and the pocket to the stock brackets (a little drilling and/or grinding of the brackets may be required).
lammy29Nottingham, UK · May 18, 2009#196 Originally Posted by
CTScott ↑ Correct. You may have to be a bit creative to mount the alpine HU and the pocket to the stock brackets (a little drilling and/or grinding of the brackets may be required).
👍i waited 2yrs nearly..........
so i dont need to purchase the item your selling?
lammy29Nottingham, UK · May 18, 2009#197IsLNdbOiLas Vegas, NV · May 18, 2009#198You should look for the authentic Toyota branded single din pocket w/ door. I've found some on eBay before. I think they came out of old Camrys.
lammy29Nottingham, UK · May 18, 2009#199 Originally Posted by
IsLNdbOi ↑ You should look for the authentic Toyota branded single din pocket w/ door. I've found some on eBay before. I think they came out of old Camrys.
i tried searching, but don't know what to search for. the reason i trying find a different one is because its a usa seller and i prefer if possible a uk seller that way save time and custom payment
typed in toyota single din and found this what u reckon?
http://cgi.ebay.co.uk/Toyota-Verso-t...3%3A1|294%3A50 or even this one
http://cgi.ebay.com/ebaymotors/METRA...fAudioQ5fVideo CTScottThread starterUSA, CT · May 18, 2009#200 Originally Posted by
lammy29 ↑ 👍i waited 2yrs nearly..........
so i dont need to purchase the item your selling?
The part that this thread is about is the PZ489-B0330-00, which is one of the three Toyota parts that you need.