Yarisworld Archive

DIY Fog Light Parts .

32 posts · 28,587 views

1NZYaris1Original postNew Zealand · Mar 20, 2009#1
When you purchase any after market YARIS fog lights ,ie Sedan or Hatch Back
You should also purchuse or make the following parts

These will allow you to PLUG into the factory wiring (no running wires through firewall) (must have)
PURCHASE FROM Micro Image - cali yaris

The relay goes under the dash as per diagram , (must have)
PURCHASE FROM Micro Image - cali yaris

If you want to use the aftermarket switch supplied you must remove it from the wiring loom supplied
so it looks like the photo, then wire it in as per other diy's (or you can PM me and i wil send you the factory instructions)

Or you can go and buy the factory light stalk and do no wireing in the cabin. just plug it in . (optional )
fog light wire 004.JPGfog switch and wire 1.jpg2009-02-09-1153-55.jpg2009-02-09-1152-36.jpgrelay 005.JPG

Replies 31

RogueYarisJAX · Mar 20, 2009#2
Thanks for this info, I've been thinking of getting some fogs.
1NZYaris1Thread starterNew Zealand · Mar 20, 2009#3
The above parts are a must have 🤘
ArkhangelPuerto Rico · Mar 20, 2009#4
Im waiting on this kit to get here
Does that harness look like what your sayin?
Picture lost · racingguys.onlinera.com
1NZYaris1Thread starterNew Zealand · Mar 20, 2009#5
The harness in these Kits need to be modified if you want to plug into
the factory wiring, thats why you need to make & or buy the above parts .
Otherwise you can use the kit wiring but you will need to find a way to run the wiring into the cabin.
The Choice is yours👍
ArkhangelPuerto Rico · Mar 20, 2009#6
Got it
YarisSedanCalifornia - Bay Area · Mar 20, 2009#7
I see so with this mod the fog lights will come on when you turn on your lights and no need for a special switch?
1NZYaris1Thread starterNew Zealand · Mar 20, 2009#8
Originally Posted by YarisSedan ↑
I see so with this mod the fog lights will come on when you turn on your lights and no need for a special switch?
You need to use eathier the switch in the kit or buy the light stalk with built in switch from toyota .
the end result by useing factory wiring is the dash symbol for fogs also turns on , and sounds light alarm if they are left on with car turned off .👍
YarisSedanCalifornia - Bay Area · Mar 20, 2009#9
Ahh i see what you mean. I didnt even know there was a dash symbol for fogs lol.
ArkhangelPuerto Rico · Mar 21, 2009#10
im bit dense right now lol Attached picture not available

what cable is that Labeled C


Is there a better datailed how to??
1NZYaris1Thread starterNew Zealand · Mar 21, 2009#11
C is the negative (earth ) factory diagram shows it connecting to the battery. 👍
ArkhangelPuerto Rico · Mar 21, 2009#12
Still dont get it, ok i got the kit today and well wanted to connect it "Factory"
how can i hack / splice / wire the harness that came with the kit to achieve this?
1NZYaris1Thread starterNew Zealand · Mar 22, 2009#13
PM'ed , but as above you need to purchase or make the above parts in photo's .

if you look at your photo of what you bought the loom on the left goes
under to bonnet and connects to the lights , then make or purchase
the red wires in my first photo . that is what connect you into the factory wiring.
inside the cabin
take the wiring loom on the right in your photo , take the plug that connects to the on/off switch follow the wires back as far as you can
and cut them of the loom (as per photo 3 in my first post)
now depending on how you want your lights to work , will depend on where you put those wires👍
ArkhangelPuerto Rico · Mar 22, 2009#14
ok understanding a bit more. lol i was like🤷😕🆘🍻
cali yarisCanoga Park, CA · Mar 22, 2009#15
yeah, I'm still like that and I sell the kit. 😆
ArkhangelPuerto Rico · Mar 22, 2009#16
whats needed for the factory install, im installing it loosely for now just to have it on, but if i can install it where when i turn the fogs on the indicator on the dash turns on that would be sweet
1NZYaris1Thread starterNew Zealand · Mar 22, 2009#17
Originally Posted by cali yaris ↑
yeah, I'm still like that and I sell the kit. 😆
🆘 You 2 are shocker's ,🙄 or is my spelling and english that bad . 😆
oh well you could always pay my airfare over , and i could teach you .😆
better still you could come too New Zealand , for your a Holiday , and
bring me a bonnet and front bumper and i will teach you . 👏 👍 👏 👍 👏
ArkhangelPuerto Rico · Mar 22, 2009#18
Originally Posted by 1NZYaris1 ↑
🆘 You 2 are shocker's ,🙄 or is my spelling and english that bad . 😆
oh well you could always pay my airfare over , and i could teach you .😆
better still you could come too New Zealand , for your a Holiday , and
bring me a bonnet and front bumper and i will teach you . 👏 👍 👏 👍 👏
Whos is the Offer directed to lol
ArkhangelPuerto Rico · Mar 22, 2009#19
With the info you have supplied me its getting clearer and clearer...
in cabin wiring still a bit hazy . i like the idea of the OEM Light Stalk
but only if i can get on the cheap lol
1NZYaris1Thread starterNew Zealand · Mar 22, 2009#20
Originally Posted by Arkhangel ↑
With the info you have supplied me its getting clearer and clearer...
in cabin wiring still a bit hazy . i like the idea of the OEM Light Stalk
but only if i can get on the cheap lol
plenty of members here have it , just borrow there car for a little while .
the other offer is open to all .👍 😆
ArkhangelPuerto Rico · Mar 22, 2009#21
Originally Posted by 1NZYaris1 ↑
plenty of members here have it , just borrow there car for a little while .
the other offer is open to all .👍 😆
not many members are from Puerto Rico :P
lunjiaowPerth, Australia. · Mar 27, 2009#22
Where abouts does the relay go under the dash?

nevermind, i found it.
cyberfroggTX · Mar 27, 2009#23
Wait. Where can I get the relay needed for the fog lights?? I'm confused.... Everything's set up for em but I just need that darn relay. I can't find it at chechers, or auto zone..
1NZYaris1Thread starterNew Zealand · Mar 27, 2009#24
Originally Posted by cyberfrogg ↑
Wait. Where can I get the relay needed for the fog lights?? I'm confused.... Everything's set up for em but I just need that darn relay. I can't find it at chechers, or auto zone..
Garm has them a long with the wireing ,
1NZYaris1Thread starterNew Zealand · Mar 27, 2009#26
Originally Posted by cyberfrogg ↑
I already got the wiring down and I have this exact same kit: DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0 I just need the relay... I'm so confused. @_@
you can go to toyota but it will cost you dearly , or you can try Garm .
or do a google search,sorry i can't be of any more help .
Metrixx3South River, NJ · Apr 29, 2009#27
INZYaris1...and garm can't find those placed on the web , could you post links to this placed ??. thanks.
argylesocksmanch · May 10, 2009#29
Originally Posted by cali yaris ↑
yeah, I'm still like that and I sell the kit. 😆
I didn't see anything on your site for an 09 Hatchy... did I miss it??
1NZYaris1Thread starterNew Zealand · May 10, 2009#30
Originally Posted by argylesocks ↑
I didn't see anything on your site for an 09 Hatchy... did I miss it??
09 Hatch use's the same lights as the 06-08, but use's different face plates .
09 faceplate's are only available at the dealer's ,for know , probably until next year. 👍
jefferelliSeattle WA · Sep 12, 2009#31
Well bought a set of foglights on ebay.. now wishing I would have just bought them at micro image

The switch is not the same size as the others in the center console. I dont feel like dremeling the console just to make a funky long shaped switch fit that will bug me when I look at it and it doesnt match the others. So I was thinking that I might try the fog light Stalk as it would be more convienent anyway. TRD sparks had it for 75 bucks. Has anyone put one of these in and could give me some advice? I have been searching posts and see that it was mentioned you just remove the old and plug in the new. Does this require me to remove the steering wheel also like you need to for the varianble wiper stalk?


Does Micro Image still sell the under the hood red 2 wire connector setup seperatly. I was looking on the site and didnt see it. I could make my own I suppose, just need crimpers and pins.. But was hoping for the convienence of a premade.


Thanks for any help .
nick.dollimountHalifax, NS Canada · Sep 14, 2009#32
PM Garm (CaliYaris) for the wiring kit alone. He should be able to hook you up.

As for the switch, I have an interesting story. The switch that came with my lights off ebay was a bit faulty. When I would turn them on then off then on again fast, they wouldn't come back on the second time. I'd have to leave them off for like 3 seconds first. Then they'd work again. So from a suggestion from CTScott, I tried just bridging the connection and was able to turn them on and off fast. So I replaced the stupid fog switch with a little general-use rocker on/off switch. I dremeled one of the plastic place-holders to fit the rocker switch and got it in the same spot as I had the actual fog switch (right by the e-brake). So now I can switch it on/off repeatedly fast and they come on each time. And it actually looks A LOT nicer than the big clunky fog button.