Yarisworld Archive

Project Slowtop Stage 2

98 posts · 188,718 views · page 1 of 2

turboecho2005Original postOttawa, Ontario · Mar 9, 2009#1
Hey guys,

Its been a while since i've updated anyone on my Project Slowtop.

For thoes who don't know I have a 2005 Toyota Echo 2Door Hatchback. It was a former Echo Cup race car.

Last Summer Turbine Tech has swapped in a 4age blacktop with 6speed transmission plus a turbo setup.

After driving it for a few months i needed for it to be faster ;) We had may discussions on what to do. First i wanted to get a supra 2jz motor and make the echo RWD. But that ended up being too much trouble. There was complications in fitting the steering rack... the fire wall had to be pushed back... So we scrapped that idea.

Then i thought of using the awd system from an Echo in japan but it was next to impossible to source the parts and shipping and importing it would have been a nightmare. And it would have most likely cost more then the 2jz setup... so back to the drawing board.

I was stuck on having a RWD car. After going around the track in an s2000 this past summer i knew it was a must! Or even better having an AWD setup (Turbine Tech pulsar GTiR is just so amazingly fast it blew my mind)

I throw out the idea of moving the blacktop motor to the rear and making a mid engine echo! the crazy Aygo is unbelievable with its mid engine setup. so after cruching some numbers Jess got back to me and said its going to be more cost effective to do a twin engine setup.

2 X 4age Blacktop motor
2 X Turbos
2 X 6 speed transmissions w/ LSDs
______________________________
2 X the fun!

So here is the first photo of the Twin Engine Blacktop Echo. For everyone's enjoyment. I'll have some photos come april IF its ready for the car show.

Picture not included in this copy

Special thanks to Turbine Tech!

Replies 97

TamagoOff Grid · Mar 9, 2009#2
twin engine! doing it like the europe has been for decades, very cool

i'm interested in more than pictures. where are you going to put your fuel tank?
eTiMaGoBangkok, Thailand · Mar 9, 2009#3
😳👍

do it!
Russelt3hPirateEpcot · Mar 9, 2009#4
moar pics!
CASTREXCosta Rica · Mar 9, 2009#5
If you get that thing working properly you are going the become my new heroe...

That is some MAJOR project you got there!


One question... concidering you are going the turbo route...

Didn't you concider the 4AGZE instead? cheaper and can make 300whp on it's stock form with no troubles.

BTW, my uncle has a Pulsar GTi-r... amazing little car!
AlexNet0Rockland, ME · Mar 9, 2009#6
ITB's FTW
White YarisWarm Orange County · Mar 9, 2009#7
mad science project! do it!
TamagoOff Grid · Mar 9, 2009#8
Originally Posted by CASTREX ↑
If you get that thing working properly you are going the become my new heroe...

That is some MAJOR project you got there!


One question... concidering you are going the turbo route...

Didn't you concider the 4AGZE instead? cheaper and can make 300whp on it's stock form with no troubles.

BTW, my uncle has a Pulsar GTi-r... amazing little car!
http://www.toysport.com/technical%20...tech_notes.htm

this is a good read
CASTREXCosta Rica · Mar 9, 2009#9
Nice info!

What I meant about the AGZE is that is already boost friendly...

Just throw the SC away and snap a T28 turbo and you can be pushing 250-300 whp all day long.
Super strong OE rods, forged low comp pistons, oil squirtes...

While a black top will need rods and pistons to ba able to handle real boost.

For N/A... the 20V with it's ITB's would rule...
TamagoOff Grid · Mar 9, 2009#10
Originally Posted by CASTREX ↑
Nice info!

What I meant about the AGZE is that is already boost friendly...

Just throw the SC away and snap a T28 turbo and you can be pushing 250-300 whp all day long.
Super strong OE rods, forged low comp pistons, oil squirtes...

While a black top will need rods and pistons to ba able to handle real boost.

For N/A... the 20V with it's ITB's would rule...
i ran a corolla FX16 with 20V blacktop swap.. walked him

boost > NA

toysport still recommends changing pistons for applications over 10psi..

down here the 4EFTE is the engine of choice, much more stout than the 4AG, it doesn't spit head gaskets as much.
turboecho2005Thread starterOttawa, Ontario · Mar 10, 2009#11
Well people will argue which is better... the 4agze or the 4age 20v. Sure for boost the 4agze out of the box is better but you can eventually make more power from the 20v motor with some nice rods and pistons. Plus the 20v motor comes with ITBs, 6 speed transmission with LSD, a better flowing head. Just need some good head studs and a metal HG.

Also the car now has independent suspension in the rear :) so it should handle quite a bit better on the track.
CASTREXCosta Rica · Mar 11, 2009#12
^^^ yeah you are right about that...

It was just my budget oriented mind speaking.... 😳

I guess, for some one who changes his engine once a year, adding a few extra pistons and rods to the modifications list is not much of a problem!!😲
ae92trueno7Edmonton, Alberta · Mar 11, 2009#13
nice!!! hopefully that goes well!!! 4age!!!! is better i think.... u can get the mr2 supercharger on it!!!
cali yarisCanoga Park, CA · Mar 11, 2009#14
Also the car now has independent suspension in the rear :)
Can you start another thread showing how you did that?
TamagoOff Grid · Mar 11, 2009#15
Originally Posted by cali yaris ↑
Can you start another thread showing how you did that?
it'll be a complete MR2 subframe most likely


but as he said in the first post, the engine really isn't mounted yet, much work to be done!
TamagoOff Grid · Mar 11, 2009#16
Originally Posted by ae92trueno7 ↑
nice!!! hopefully that goes well!!! 4age!!!! is better i think.... u can get the mr2 supercharger on it!!!
lol, that eaton piece is garbage.

he'll be making much more power than the stock SC would be able to produce
turboecho2005Thread starterOttawa, Ontario · Mar 11, 2009#17
Actually the picture has the motor mounted with all the suspension is mounted. It's currently a rolling chasis! All the fabrication of the motor mounts and suspension is complete.
TamagoOff Grid · Mar 11, 2009#18
Originally Posted by turboecho2005 ↑
Actually the picture has the motor mounted with all the suspension is mounted. It's currently a rolling chasis! All the fabrication of the motor mounts and suspension is complete.
more pix please!
PHXDEMONPhoenix, AZ · Mar 11, 2009#19
Twin engines Holy shit 😆🎉
ztrack157Biggs, CA · Mar 12, 2009#20
🍻 you have offical lost your marbles.
rob323Joyner, Brisbane · Mar 15, 2009#21
Originally Posted by Tamago ↑
it'll be a complete MR2 subframe most likely

Nah, that's an Echo front subframe under there and I can see the shock towers have been modified to take the struts. Come on, more pics of the enginemounts etc please.

Are you keeping the steering rack in there (but locked off) so you can adjust toe?

Do I see a fuel cell in your future? 🎉
Bluevitz-rsOshawa, Ontario, Canada · Apr 5, 2009#22
You're such a tease man! WE WANT MORE!!! HAHAHA
turboecho2005Thread starterOttawa, Ontario · Apr 12, 2009#23
I can't believe how many PMs i have recieved about my car. its actually a bit overwhelming... Thanks for all the great comments guys!

Update:

The car is currently running. Although there is still work to be done like boxing in the motor and making a firewall... and paint and some little odds and ends.... but it RUNS! and ready as is for a car show this comiing weekend.

Happy Easter everyone!
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
at3GGVA Beach · Apr 12, 2009#24
wow
changchewsoonMalaysia · Apr 12, 2009#25
wicked!!
crxgamesWalton, Kentucky · Apr 13, 2009#26
So sick, man! It's gonna be a beast.
cali yarisCanoga Park, CA · Apr 13, 2009#27
crazy, in a GOOD way. 👍
AlexNet0Rockland, ME · Apr 13, 2009#28
OMG that is going to be absolutely nuts.
neo1985temple city · Apr 13, 2009#29
i love it!! thats all i can say
PHXDEMONPhoenix, AZ · Apr 14, 2009#30
🙇
yarisugiハワイ · Apr 14, 2009#31
How do you get two transmissions running together?
CtrlAltDefeatIndianapolis IN · Apr 14, 2009#32
holy $#!%! you are insane... I wonder the weight penalty tho... prolly not enough to make it not worth it...
A-tronMI · Apr 14, 2009#33
That thing is abloslutely nuts man. Great job.
😳🙇🙇😳
LambpastyMassachusetts · Apr 14, 2009#34
Originally Posted by yarisugi ↑
How do you get two transmissions running together?
Curious about this too. Looks ridiculous though man 😳🤤
turboecho2005Thread starterOttawa, Ontario · Apr 14, 2009#35
Originally Posted by Lambpasty ↑
Curious about this too. Looks ridiculous though man 😳🤤
Well both transmissions are independent from eachother. What "syncs" the transmissions is the final gear. As long as the final gear is the same then their won't be any problems... Both transmissions are 6 speeds with LSDs :)

There is a master brake cylinder controlling both clutches so i only have to use 1 pedal. Mind you there are tones of adjustment to both the throttle and clutch cables and the shifter linkages to get everything shifting smooth...

Picture not included in this copy
supmetSouthern California · Apr 14, 2009#36
man it looks like your just down to fine tuning and sealing up the rear engine...

can't wait for videos and pictures of the finished product..
turboecho2005Thread starterOttawa, Ontario · Apr 14, 2009#37
Originally Posted by supmet ↑
man it looks like your just down to fine tuning and sealing up the rear engine...

can't wait for videos and pictures of the finished product..
Far from being a finished project.... There are still lots of parts that are waiting to come in. We are just getting by with some factory parts for now. Waiting on Konis, aluminum rads, firewall and engine cover, Custom Spec clutch, LCD screens that will display the guages for each motor, bracing, and a few other parts... Its just running and rolling right now but in no way shape or form is it ready to be put on a track and start drifting around ;)

Once its all up and running and all the bugs are worked out i'll see about getting water/meth injection and some pistons so we can truely see what this car can do.

Its months and months away before its even close to a truely finished project...
yarisugiハワイ · Apr 14, 2009#38
SUBSCRIBED :)
Nexus1155Dorchester · Apr 15, 2009#39
Wow I can't beleive your car evolved as much as it did and you are doing some incredible work on this thing. Can't wait to see a video of it, but in the mean time.... Shake a Leg!!!
ChinoCharlesOH · Apr 15, 2009#40
Ridiculous! The first Toyota subcompact in space.
ParmasML · Apr 17, 2009#41
Hey Bruce, this is an absolute unique project you are making! I think few will have the patience and cash to make this thing up.

Btw I have some questions for you about this...

First looking at your setup my first question is about cooling... If I am calculating right, the rear engine will infact run hotter than the front one because of lack of airflow (although that depends where does you consider to put the rear engine's radiator). You have to consider a unique body kit to get as much airflow from the sides or from the top.

Another thing is the ecu. Probably you will be using two standolanes with independent configuration, so lets say you tune each ecu for the same exact power and torque on each engine, probably you will have problems with control especially in turns. You have to figure out a balance of power if its better more at the back or at the front.

Although this is just my opinion on a delicate and complicated you are free to correct me 🙂
cali yarisCanoga Park, CA · Apr 17, 2009#42
Once they are tuned, he can adjust power by changing the boost for each motor.
scottxkillsyouyarisland · Apr 18, 2009#43
SLOW
CtrlAltDefeatIndianapolis IN · Apr 18, 2009#44
Originally Posted by scottxkillsyou ↑
SLOW
wow, that was constructive 👎
oh and...
AlexNet0Rockland, ME · Apr 18, 2009#45
That is nuts, cant wait to see it in action.

Originally Posted by scottxkillsyou ↑
SLOW
Wow, great first post...🙄
scottxkillsyouyarisland · Apr 18, 2009#46
its all jokes, ive actually been in the car so i would know how lame and slow it is. Bruce knows its slow, relax.
Nexus1155Dorchester · Apr 18, 2009#47
hahaha 300hp from each engine = 600hp to each set of wheels on a -2000 lb car, i can call that a 10s car...
scottxkillsyouyarisland · Apr 18, 2009#48
Originally Posted by Nexus1155 ↑
hahaha 300hp from each engine = 600hp to each set of wheels on a -2000 lb car, i can call that a 10s car...
if it hooks up im sure it would run 10's. there was a twin engine tiburon making less power and it runs in the 10's
turboecho2005Thread starterOttawa, Ontario · Apr 18, 2009#49
Lol that's awsone Scotty ;) we gotta start bolting up your turbokit asap.... WTF are we waiting for???

Btw I was just at the car show. The car looks even better in person. I am very happy with the work jess had done.

I also could not believe how many people were gathered around the echo... With all of the cars there the echo seemed to attract a huge amount of people. The reactions I got to see were priceless.

Currently the front motor has 248whp and the rear 255whp with a total of 503whp. Unfortunatly I didn't get a chance to drive it :( I was late getting there... I was busy working on my new car, 92 vw jetta (also known as project low&slow)

I'll keep you guys updated in the next few months on the status of the echo.

To answer parmas question about cooling.... That is something that we have to figure out. We discussed about pushing the rear windows in and running vents down to the rad. But I am very picky about body modifications. I would like to keep the body as close to factory as possible. That's why you don't see any vents in the side of the car.

When I get back into town I'll be posting photos of the show. Unfortunately they aren't the best. The iPhones camera is just plain horrible but its better then no photos.
SabretoothSt Cloud FL · Apr 19, 2009#50
Originally Posted by turboecho2005 ↑

To answer parmas question about cooling.... That is something that we have to figure out. We discussed about pushing the rear windows in and running vents down to the rad. But I am very picky about body modifications. I would like to keep the body as close to factory as possible. That's why you don't see any vents in the side of the car.


I think your not going to have many options, unless you want to mount a roof scoop, or simply just do the windows, or try and gather air around the rear fenders.

Best and possibly the cheapest is to do the trick with the windows, it wont be too noticeable.