Replies continued
Sodium DuckThread starterWestern Mass. · Mar 18, 2009#51 Originally Posted by PK198105 ↑
thanks sodium, but i think its still possible , look at certain pads on the pcb they look like they are there for something. also isn't there a small module that snaps into the connector?
Nope, the big rectangle is what the LCD itself connects to with those long pins. Then there are the three LED's, and the push pad for controlling the display. Those are the only things that I can see that are related to the LCD, but I'm not electrical engineer, *shrug*.
1 attachment not included in this copy
Sodium DuckThread starterWestern Mass. · Mar 18, 2009#52 Originally Posted by
CTScott ↑ I think you need to upgrade the backlight LEDs. With the smoked lens in front of the reverse contrast LCD it will require more lumens to have the text be as bright as the background was...
I think it would help, too. Marty said he'd be willing to send me some of his scraps though, so I am hoping to try that first if all goes well with him.
Sodium DuckThread starterWestern Mass. · Mar 18, 2009#53That's the board that goes on the back of the main circuit board. It is where you connect one of the two cables to the cluster. It doesn't have anything to do with the LCD as far as I can tell. They're completely separate.
IllusionXBrossard, QC · Mar 19, 2009#54i just remember i had done this in my echo..
but the job was easy, it was simply taking the LCD out, invert that plastic on top, and voila.. Visibility was 100% during the day. Not to mention the LCD lights up during the day too... in amber.
Picture not included in this copy
Sodium DuckThread starterWestern Mass. · Mar 19, 2009#55You just flipped it around? I thought you have to rotate it.
IllusionXBrossard, QC · Mar 19, 2009#56rotate?
when i took it apart, the other plastic just fell out, so i flip it over, and put it back together... i might try it with the yaris.. i'll get back if it works.
but as i saw the last time i took it off.. it seem like it was just a thin film glued on it..
CTScottUSA, CT · Mar 19, 2009#57Flipping works the same as rotating with linear polarization.
LCD manufacturers used to just sandwich the polarizing film, so you could just flip it. Now they all seem to glue them (probably because most of what they make are now frameless ones).
Meteorite_MartyWaterloo, Ontario, Canada · Mar 19, 2009#58Flipping does nothing on my radio. I had to remove the film (which has adhesive), and turn it 90 degrees.
Btw... I just got my new 17" polarizing sheet from 3Dlens.com. Fast delivery!!!
Tried it up against my radio and it seems the polarizing will be dark enough to invert the display. Will apply it tonight, and post pics.
Sodium DuckThread starterWestern Mass. · Mar 19, 2009#59Wow - that was fast! Can't wait to see how it looks.
So will your inversion be black background with green letters?
Sodium DuckThread starterWestern Mass. · Mar 19, 2009#60Oh, and how thick is the material? The one from Edmund Optics was pretty thick, maybe about 10 sheets of paper I'd say. Not very flexible at all.
CTScottUSA, CT · Mar 19, 2009#61I've been doing some experimentation with LCDs. I have a reflective one (the black on white type with no backlight) and a transmissive one (black on white with a green backlight, hence black on green).
With the reflective one I can flip the polarizer to invert the characters. With the transmissive one flipping has no effect (I have to rotate the polarizer to invert).
In doing some reading, reflective LCDs use one clear polarizer on the front surface. Transmissive ones use a second on the back.
I took the transmissive one, pulled off the rear film and flipped it. After doing so I could also flip the front and the entire display was inverted and twice as bright as with the rear not flipped and the front rotated.
Sodium DuckThread starterWestern Mass. · Mar 19, 2009#62And we have the transmissive type for the gas gauge, correct?
CTScottUSA, CT · Mar 19, 2009#63Here are some pictures:
Here is the normal mode for the LCD:
Picture not included in this copy
Here is the front and rear both flipped:
Picture not included in this copy
Here is rear normal, front rotated 90 on side A:
Picture not included in this copy
Here is rear normal, front rotated 90 on side B:
Picture not included in this copy
CTScottUSA, CT · Mar 19, 2009#64 Originally Posted by
Sodium Duck ↑ And we have the transmissive type for the gas gauge, correct?
Correct - Gas gauge (and the radio display) are both transmissive. Hence the reason that flipping just one doesn't work.
Meteorite_MartyWaterloo, Ontario, Canada · Mar 19, 2009#65 Originally Posted by
Sodium Duck ↑ Wow - that was fast! Can't wait to see how it looks.
So will your inversion be black background with green letters?
Black background with WHITE letters. I did a radio LED mod. My entire dash, heater controls, door lock, gear shifter are matched. NO MORE GREEN!!!
Meteorite_MartyWaterloo, Ontario, Canada · Mar 19, 2009#66 Originally Posted by
Sodium Duck ↑ Oh, and how thick is the material? The one from Edmund Optics was pretty thick, maybe about 10 sheets of paper I'd say. Not very flexible at all.
Its a film. Rigid, but as thin as one sheet of paper.
Sodium DuckThread starterWestern Mass. · Mar 19, 2009#67Scott, you playing with your OBDII port? What are you brewing over there!? =]
CTScottUSA, CT · Mar 19, 2009#68 Originally Posted by
Sodium Duck ↑ Scott, you playing with your OBDII port? What are you brewing over there!? =]
That's my home brew ScanGauge. It's not packaged and the LCD is socketed, so it's a good test platform for monkeying with LCDs.
CTScottUSA, CT · Mar 19, 2009#69When you put the ES film on your gas gauge, did you notice the effect in the pictures, where when rotated the film works on either side, but one much better than the other?
Sodium DuckThread starterWestern Mass. · Mar 20, 2009#70I did a test where I just held the film up to the LCD, both sides and both directions, and didn't notice any difference. *shrug* maybe it's just me?
Sodium DuckThread starterWestern Mass. · Mar 20, 2009#71You know, I still have one more 2" X 2" film... maybe I'll try replacing the back...
Meteorite_MartyWaterloo, Ontario, Canada · Mar 20, 2009#72Here are my pictures of my completed test radio deck. I also took some comparison shots with my main radio deck, which I will do later. Test deck is the one with cracked button.
1 attachment not included in this copy
Meteorite_MartyWaterloo, Ontario, Canada · Mar 20, 2009#73Here's some "before" shots of my live deck. Keep in mind, I have a WHITE LED modification on this deck.
2 attachments not included in this copy
Meteorite_MartyWaterloo, Ontario, Canada · Mar 20, 2009#74Here are some "after" shots of my test radio deck. These still have the stock green LEDs.
5 attachments not included in this copy
Sodium DuckThread starterWestern Mass. · Mar 20, 2009#75So the last two are day shots of your inversion? Looks like you have the same problem as me. The night shots look awesome at least. That's really cool with the black on green. Are you going to go for it on your modded deck?
Meteorite_MartyWaterloo, Ontario, Canada · Mar 20, 2009#76 Originally Posted by
Sodium Duck ↑ So the last two are day shots of your inversion? Looks like you have the same problem as me. The night shots look awesome at least. That's really cool with the black on green. Are you going to go for it on your modded deck?
I have no problems whatsoever. Visibility is perfect in daylight.
Sodium DuckThread starterWestern Mass. · Mar 20, 2009#77Awesome!
Meteorite_MartyWaterloo, Ontario, Canada · Mar 20, 2009#78 Originally Posted by
Meteorite_Marty ↑ I have no problems whatsoever. Visibility is perfect in daylight.
I take it back. If your viewing angle changes, you will get anything from a grey, to purple, to a rainbow-like display. The display is not consistent, when viewing angle changes.
I might go back to the stock LCD display. Chock this up to experience.
Btw.... I have NO spare film for Sodium Duck. It took me so many attempts to avoid bubbling in the adhesive. I used almost all of what I have.
CTScottUSA, CT · Mar 20, 2009#79 Originally Posted by
Meteorite_Marty ↑ I take it back. If your viewing angle changes, you will get anything from a grey, to purple, to a rainbow-like display. The display is not consistent, when viewing angle changes.
I might go back to the stock LCD display. Chock this up to experience.
Btw.... I have NO spare film for Sodium Duck. It took me so many attempts to avoid bubbling in the adhesive. I used almost all of what I have.
Did you do anything with the rear film? With the experimentation that I did, if the front and rear film are both flipped, rather than one being rotated, the viewing angle is not affected.
JustAnotherAsianmilpitas / santa rosa · Mar 20, 2009#80awesome mod idea for any lcd. i didn't think of the radio.
heck, i wonder if my ti-83 will do the trick. lol.
Meteorite_MartyWaterloo, Ontario, Canada · Mar 21, 2009#81 Originally Posted by
CTScott ↑ Did you do anything with the rear film? With the experimentation that I did, if the front and rear film are both flipped, rather than one being rotated, the viewing angle is not affected.
Its strange. On my test deck, the viewing angle is not affected. I did the exact same procedure on my live deck and I have the viewing angle problem. I sliced the film the same direction each time. Perhaps since the decks are different models (6CD model versus 1CD),maybe the LCD displays are different.
I am not sure what films you are mentioning. Front and Rear? There is only one polarizing layer on the LCDs that I have been working with.
Sodium DuckThread starterWestern Mass. · Mar 21, 2009#82LCD's have two polarizers. I think this pic is the right kind to show it.
1. Vertical filter film to polarize the light as it enters.
2. Glass substrate with ITO electrodes. The shapes of these electrodes will determine the dark shapes that will appear when the LCD is turned on. Vertical ridges are etched on the surface so the liquid crystals are in line with the polarized light.
3. Twisted nematic liquid crystals.
4. Glass substrate with common electrode film (ITO) with horizontal ridges to line up with the horizontal filter.
5. Horizontal filter film to block/allow through light.
6. Reflective surface to send light back to viewer.
1 attachment not included in this copy
Meteorite_MartyWaterloo, Ontario, Canada · Mar 21, 2009#83 Originally Posted by
Sodium Duck ↑ LCD's have two polarizers. I think this pic is the right kind to show it.
1. Vertical filter film to polarize the light as it enters.
2. Glass substrate with ITO electrodes. The shapes of these electrodes will determine the dark shapes that will appear when the LCD is turned on. Vertical ridges are etched on the surface so the liquid crystals are in line with the polarized light.
3. Twisted nematic liquid crystals.
4. Glass substrate with common electrode film (ITO) with horizontal ridges to line up with the horizontal filter.
5. Horizontal filter film to block/allow through light.
6. Reflective surface to send light back to viewer.
The radio seems to have only one layer that can be peeled off to affect polarization. On the other side of the LCD, is the side that is exposed in your car, and is a rough texture surface built onto the glass (I think). Again, the weird thing is for me, is that I peeled the same layers off from both decks, cut and applied the new film the same way, but achieve different results. 🤷
Meteorite_MartyWaterloo, Ontario, Canada · Mar 21, 2009#84By the way Sodium Duck, I am getting a new 17" sheet from my supplier. Original was actually damaged in shipping, so I was unable to use the entire sheet. The damage had nothing to do with my results. At least I have another chance to offer scraps to you later on.
Sodium DuckThread starterWestern Mass. · Mar 21, 2009#85Cool thanks!
goku87AK · Mar 21, 2009#86 Originally Posted by
Sodium Duck ↑ I used two small drops of epoxy to secure the film in place.
Very disappointing results. Driving without the plastic cover on the gauges, it was fine. But once the plastic cover went on, the visibility went to shit. I even tried doubling up the polarizers, but it went to black. I guess I'll live with it for now. Maybe I'll just splurge on a cluster with tach - only 600 dollars right? lol
Maybe it will be better at night.
WOAH WOAH WOAH WOAH! Are you telling me that I can go get one of these gauge clusters w/ tach and it will tell me my mpg and the gear i'm in and temp and other cool stuff? I have a manual/3dr, does that mean no...? :(
Sodium DuckThread starterWestern Mass. · Mar 21, 2009#87I don't know what the cluster does. It's whatever the S model has on it. There's a ton of threads about it. I'm not even 100% sure it's possible as you'll read in other threads. It's a confusing topic.
goku87AK · Mar 22, 2009#88 Originally Posted by
Sodium Duck ↑ I don't know what the cluster does. It's whatever the S model has on it. There's a ton of threads about it. I'm not even 100% sure it's possible as you'll read in other threads. It's a confusing topic.
hmmm, sounds like a major pain. oh well. lol.
Sodium DuckThread starterWestern Mass. · Feb 21, 2010#89Well, I decided to try and fix my LCD. Up until now, it was just not very visible from my past attempt at this. So I took my last polarizer out to the car and was just playing around with it. Well, if you turn it 45 degrees, you get black on white. Woot. Looks great. I don't know why I didn't think of this before. I took a few pictures to show it. It was hard to get the camera to show what it really looks like.
4 attachments not included in this copy
enobmort42Denver, CO · Feb 21, 2010#90I'd love to do this when it warms up a bit outside. Does anyone know of any retail places that would carry it? I know there's the link, but I hateee waiting for shipping and such lol
Sodium DuckThread starterWestern Mass. · Feb 21, 2010#91There aren't really any, "retail stores," like Home Depot or Staples for example, that would carry an item like this. There's no steady market/need for it in the retail arena. If there is, I'd be really surprised. Online is the only way to go with this.