Yarisworld Archive

Installing Blitz Supercharger

197 posts · 38,784 views · page 4 of 4

Replies continued

LtNoogieWest Hills, CA · Mar 14, 2009#151
If you look at the first picture. It's the large connector from a bottom view. The second picture is the wiring diagram just as if you were looking directly at the pins of the ECU. Imagine rotating the connector harness down to mate with the diagram. See how the three rows of six pins on the left will mate up?

So to find the right wires, we looked at the connector from the top (wire side) and counted pins to match the diagram.

Picture not included in this copy

Picture not included in this copy
LtNoogieWest Hills, CA · Mar 14, 2009#152
😁

Hey Peter, I've uploaded another video. Waiting for YouTube to process.

It's not as spectacular as your last one 🙄 but it shows a vacuum/boost gauge and wideband in action while driving.
PETERPOOPOahu · Mar 14, 2009#153
nice nice! glad you're contributing the Blitz archives. I can't wait to see the wideband in action. Pretty lights.
LtNoogieWest Hills, CA · Mar 14, 2009#154
I hope. The video is a little blurry because of zoom and my camera mount was shaking like crazy. This is my first time using Microsoft Movie Maker. It's a pretty cool tool.

What in the heck does YouTube do with a video that takes so long to process?!?
PETERPOOPOahu · Mar 14, 2009#155
I use movie maker for all my videos.

Youtube has been acting kind of weird. Some videos it processes forever and ever. So those I decide to delete and just re upload. It should only take 5 minutes at most to process. Unless it's a HUGE file like my HD movie I did for the yaris, that will take a long time.

The trick to getting the youtube to convert your video to give you the "HQ" (high quality) option when viewing, is to make the movie file as big as you can on movie maker. The bigger the file, the clearer it is, thus youtube can give you the option to view in HQ. After you upload and when the video is available to view, sometimes it is still processing to give you the option for "HQ."
PETERPOOPOahu · Mar 15, 2009#157
YES! and you got the "HQ" option with it too! Niceeee

I'm about to test drive my car. Just finished installing the Megan header. Brb
PETERPOOPOahu · Mar 15, 2009#158
Wow the header really opened up the restricted air flow. I can now SMOOTHLY accelerate without a feeling of restriction. I think i can really feel the difference with the header because I am putting out more HP than a stock car does. Most cars that are stock can't feel a significant difference with an aftermarket header; but I really can! I can't imagine now with a 2.25" headerback exhaust! yeeeeeeee

Noogie: I looked at your other videos on your youtube account; did you REALLY tape all those strings onto the back of your windshield!!?!
LtNoogieWest Hills, CA · Mar 15, 2009#159
Is that your butt dyno speaking? How long before we see a new graph? I'm still waiting for someone to take me up on my offer for dynoing a stock Yaris.

Hey, my video is meant to be instructive. I'll leave the pulse-raising, marketing videos to you.
PETERPOOPOahu · Mar 15, 2009#160
Yes, my butt dyno speaking. But it's not more so a power increase, just a smoother transition and from the low RPMs to redline. Anywho, I will continue with my thrilling videos!

You still didn't answer the question about you taping all those strings onto your back windshield and looking like a crazy person.
LtNoogieWest Hills, CA · Mar 15, 2009#161
LOL. My butt dyno says that I decreased my drag by adding the vortex generators which is the equivalent of adding two horsepower.

You don't have a spoiler, do you? I don't remember.
PETERPOOPOahu · Mar 15, 2009#162
I have the OEM S model spoiler. The one before the bigger 09s. Mine probably doesn't do much at all, but looks cool! haha
cali yarisCanoga Park, CA · Mar 15, 2009#163
+1 gazillion
rpalaiFlorida, USA · Mar 15, 2009#164
Originally Posted by camelll ↑
Does your fuel controller have a pink wire?
Thank you sooo much for answering my plea for help! My mechanic called me late last night and he thinks he figured it out. However, until I get the car back running properly, who knows? In any event, could you please b so kind as to check back later beciuase if there is still an issue with the wiring, I will definitely re-post my cry for help right to your reply like this one...As far as a pink wire, I believe that the fuel controller DOES have this wire.....

Thank you again fo your reply and your kind consideraion! I will post results either way. Incidentally, how are you enjoying YOUR boosted Yaris? Mine was pretty fast even before getting the Blizt blower and Meagan racing header....Of course, I do not know the results just yet as my tech is still working on the car right now-today. I had previously installed a Next level Performance Tri-Phase module which really makes a diference. They claim an average increase of 17 HP improvement with this little module and I must tell you that it feels like that and even more! I have these Tri-Phase modules installed on 2 of my other cars and I am about to install two more on more vehicles that I own. They are AWESOME!!

I am a kind of mild collector, so my wife and I own like 10 cars...most are NOT everyday dirvers, though....if you are interested, you can see a few of them at www.cardomain.com and put rpalais into the empty search bar which will take yo righ to my garage page. Thanks again for your thoughtful kindness!!
Rich P rpalai
rpalaiFlorida, USA · Mar 15, 2009#165
Hello again, all. I just heard from my mechanic again as he is working on finishing up the install on the fuel controller for the Blitz system on my 2008 Liftback.

Please, just one more question for which I need an answer....the little red light on the Compressor Switch that mounts inside the cabin...is it supposed to be on all the time, or just lit under boost, or not at all? So far, after my technician started and just idled the car, there is no light, however, he said that he CAN hear the compressor whine when he blips the throttle, so it does seem like the clutch is engaging. That is all good! But again, no red light on the switch....so, if someone could please just let me know which is correct regarding the red light on the compressor switch that is mounted inside the cabin, I'd really appreciate it! Thanks again! rpalai
LtNoogieWest Hills, CA · Mar 15, 2009#166
Do you have an AT or an MT?
LtNoogieWest Hills, CA · Mar 15, 2009#167
I just checked with my AT LB in the low S/C setting. The red light does not come on unless the car is in gear. You might hear the clutch clacking but the blower really does not engage while in Park or Neutral. I believe Camelll just posted something similar.
rpalaiFlorida, USA · Mar 15, 2009#168
Originally Posted by LtNoogie ↑
Do you have an AT or an MT?
Thanks again for your reply. I have a MANUAL transmission car, 2008. Please let me know about the red light...This is my last "hurdle" hopefully...Thanks!
rpalai
PETERPOOPOahu · Mar 15, 2009#169
I have a MANUAL transmission in a 2008 and the light only turns red when the compressor kicks in. It will be on once the compressor kicks in and aslong as you hold the gas pedal down far enough to keep it engaged, it will remain on. You will also hear a clicking noise when the electric clutch engages. You should hear a click and the red light turning on at the same time when you press the gas down far enough to engage the compressor!


ps: Rpalai, I looked at your car domain and saw your variety of cars. You certainly don't descriminate against any car. You have all sorts of cars! When are you going to put a S/C or turbo kit into your RSX?
kurokoma-kunmy own little world · Mar 15, 2009#170
Originally Posted by rpalai ↑
Thanks again for your reply. I have a MANUAL transmission car, 2008. Please let me know about the red light...This is my last "hurdle" hopefully...Thanks!
rpalai
Glad to hear you got your wiring confusion straightened out.

To what position do you have the switch set? If set to Low you should hear the click and see the light come on right away when you gas it (Low-Med-High indicates the throttle position where s/c clutch engages). Then as Peter said the light goes off when you let off the gas.
rpalaiFlorida, USA · Mar 15, 2009#171
Hi PETERPOOP! Thanks for your very prompt and informative reply! I will pass this on to my technician who is finishing up the Blitz install hopefully, this afternoon.

Funny you should mention the Acura RSX-S. I already have purchased the Supercharger from Jackson Racing for the RSX. I have had it for awhile, but I can not give up the car just yet. As soon as I can get my 1994 Suzuki Swift back from the turbo shop as it had to be totally redone from what you see (a very long and sad story) ...I am planning to have the install done in the RSX. I LOVE Supercharging as you can see. The RSX is one of my daily drivers, but still not so much. I will be using the Swift GT more becuase it gets like 40mpg, even turbocharged! It has a 1.3 L 16V DOHC motor and is very quick even N/A. The RSX gets barely 22 mpg around town...not so good; just the nature of the beasat, I suppose. It has a 2.0, but has a LOT of power (200 HP STOCK) which is probably why......same K20A motor as the Honds Civic SI.

I will condense the story of the Swift GT...2 "turbo" shops both of whom were totally inept and crooked, really messed up my Swift GT. It never had a turbo and I wanted one put in it. One shop melted a motor. The other one just did a terrible job and set it up all wrong, so that oil constantly back-flowed into the turbo and ruined the seals. It ran OK for maybe a month. It finally has made it to the right shop in which the guy knows his stuff and is doing it right, only he is slow as molasses. It has been there just over a year and a quarter and I have lost my patience with him. So he has promised to get it done by April 30th? Yeah, Right! I will believe it when I see it! Anyway, The new turbo (a Nissan disco-Potatoe) is already installed along with an intercooler. All that needs to be done is to relocate the battery to the rear, replace my interior AC vents so I can use the AC (FL IS wayyy too hot to not use AC) and a few other minor things...but this guy is too busy and had I known this, I would not have given him my car, probably....but at the time, I had no choice and I still may not have one. Very few techs know these cars; this guy has 2 of them and his Dad had one in Trinidad where they are from. All of their Swift GT'S were also turbo models from the factory, so they really DO KNOW the cars! We never had a factory turbo option here in America, unfortunately. Incidenatlly, while I have the car there, I was able to get the right parts and I had him install factory power steering AND a factory tilt column which were never available in the USA as options. But I will now have them in my car! Very cool! So he has done a lot of work on my car in the year+ that he has it, except for finishing it up. That's the story. So I WILL have the Supercharger put into the RSX-S as soon as I get my Swift GT back.
Thanks again! rpalai
rpalaiFlorida, USA · Mar 15, 2009#172
Hi again, everyone. Again, I want to thank all of you who were kind enough to help me out today with good information! I just got my Yaris back and all I can say is WOW!!! It is now an awesome pocket rocket! Very fast. Mine was not stock to begin with as I had installed the Next Level Performance Tri-Phase module which adds very noticeable performance and TQ. Also, a cat-back twin or dual exhaust system comprised of 2 TRD set-ups AND a Meagan Racing SS large-port header. So now, with the the Blitz Supercharger in place, the Yaris is just incredible! Scoots out of the hole like a small-block V-8 no joke! I AM ECSTATICALLY HAPPY WITH THE SETUP. It was worth evey penny and every second of waiting to get it done is all I can say. Strangely enough, it feels most responsive with the compressor switch in the "LOW" position setting. It may develop more boost on the MEDIUM and HIGH positions, but it is nicer to drive and more responsive out of the hole in the low position. Just thought I'd mention that. I highly reccommend this mod to anyone who really enjoys their cars and actually likes driving them. Please feel free to ask any questions. If I can be of ANY help to anyone out there, please ask away. As a former Pharmaceutical Representative, I have a lot medical and pharmaceutical knowledge. Still, I always reccommend talking to your doctor whenever necessary. rpalai
PETERPOOPOahu · Mar 15, 2009#173
I have this tumor on my butt, I was wondering if.... j/k

So you got it working!? NICE! I prefer the setting in low also. It seems that the compressor rarely engages when its set to medium or high. You really have to give it some gas for it to engage in those higher two settings. I am glad you got it all worked out!

Post some videos of it if you can!
LtNoogieWest Hills, CA · Mar 15, 2009#174
Congratulations on another successful Blitz installation. Yours happened so fast that you did not have the chance to start your own thread!

Contact Whooppee777 to add your name to the list of boosted Yaris owners.
KCALB SIRAYVirginia · Mar 15, 2009#175
nice job, can't wait to see pics and vids
cali yarisCanoga Park, CA · Mar 15, 2009#176
Rich,

the "low" position means the compressor kicks in SOONER, so that's why you like it.

I think it goes like this -- can someone confirm?

Low = 25% throttle
Med = 50%
High = 75%
LtNoogieWest Hills, CA · Mar 15, 2009#177
Yeah, that's it. Most of us use Low or Med. I flip-flop between the two settings. Depends on whether it's hypermiler week or not.
PETERPOOPOahu · Mar 15, 2009#178
I either use low or off. No point in putting it in medium since I never press the gas pedal that far down if i'm not doing WOT or "racing."
rpalaiFlorida, USA · Mar 16, 2009#179
Hello! I received a mesage last night from kurokoma-kun. In the message, it was inferred that if you set the compressor switch to Low, for instance, the compressor clutch will engage at a lower RPM than if you set it to high...absolutley true, from what I see, which is why I actually seem to prefer to drive the car with the switch on low. My question regarding this is......can I assume that it will make more total boost when set the switch on HIGH? I find it annoying to drive with the switch on HIGH or even MEDIUM due to the fact that I have to press down much farther on the acceleratror pedal for the boost to kick in, even if it makes more total boost. The car seems to be more enjoyable and responsive with the switch set to LOW. Does this make any sense? I am still new to this setup and am strill learning about it. I just know that I LOVE IT!! LOVE driving the car now even more. Thanks! rpalai
cali yarisCanoga Park, CA · Mar 16, 2009#180
I find it annoying to drive with the switch on HIGH or even MEDIUM due to the fact that I have to press down much farther on the acceleratror pedal for the boost to kick in,
That is because it's controlled by throttle position, and NOT by RPM.

Total boost achieved should not be affected by the setting. To test this, try some WOT 0-60 at all three settings. Should be the same ETA.
LtNoogieWest Hills, CA · Mar 16, 2009#181
Originally Posted by rpalai ↑
I am still new to this setup and am strill learning about it. I just know that I LOVE IT!! LOVE driving the car now even more. Thanks! rpalai
rpalai,

Please feel free to start new threads when you have questions. The community of supercharged Yarii is growing fast and is very helpful.

I'm glad you're enjoying your new-found torque, especially at the low end of the RPM scale. I drive 25% of the time with the setting on 25% throttle. The remainder of the time I leave it at 50% throttle.

I've posted my dyno charts in the Performance forum. I've also recently posted a video of the air/fuel mixture reading at various levels of boost.

Long
mrbondIllinois · Mar 21, 2009#182
LtNoogie, I was thinking about this earlier today: I know that for centrifugal superchargers you have the option of putting a slightly smaller pulley on the unit to increase boost. Do you think that could be done with the Blitz unit?
cali yarisCanoga Park, CA · Mar 21, 2009#183
^ No, it can't be done. This is because the Blitz pulley is a clutch pulley. You'd have to redesign the whole thing with a smaller pulley -- very expensive proposition.

You COULD just put a fixed pulley on it, but then your on/off/lo/med/hi switch wouldn't work, and the tune might not be right with the fuel controller's map, either.

The other way to blow more boost is to use a larger crank pulley. NST is working on the idea.
LtNoogieWest Hills, CA · Mar 22, 2009#184
^What he said. Some Blitz'd owners are playing with putting a larger throttle body on the intake side. Others are installing larger exhaust pipes and low-flow mufflers to let the system breathe easier. I don't know of a way to squeeze more boost out the compressor.
rpalaiFlorida, USA · Mar 24, 2009#185
Hello everyone. I am trying to get my boost gauge to work but so far no good! All I canget on the gauge is vacuum. NO boost reading. I tried the gauge hooked up to the PCV hose.... NO BOOST. Then I tried cannister purge hose....NO BOOST reading here either. Can anyone suggest any place that I can hook up the gauge so I can read boost?
I am at my wita end with this. Thank you.
rpalai
LtNoogieWest Hills, CA · Mar 24, 2009#186
Originally Posted by rpalai ↑
Hello everyone. I am trying to get my boost gauge to work but so far no good! All I canget on the gauge is vacuum. NO boost reading. I tried the gauge hooked up to the PCV hose.... NO BOOST. Then I tried cannister purge hose....NO BOOST reading here either. Can anyone suggest any place that I can hook up the gauge so I can read boost?
I am at my wita end with this. Thank you.
rpalai
On your Blitz intake manifold, you screwed in a threaded brass plug during installation. It sits right below the air intake tube. To add a vacuum/boost gauge, you unscrew that plug and screw in the brass nipple that came with the kit. Your vacuum hose goes on that nipple.

I can take a picture later if you haven't found it.

Long
KCALB SIRAYVirginia · Mar 24, 2009#187
Originally Posted by LtNoogie ↑
^What he said. Some Blitz'd owners are playing with putting a larger throttle body on the intake side. Others are installing larger exhaust pipes and low-flow mufflers to let the system breathe easier. I don't know of a way to squeeze more boost out the compressor.
Really the only option would be a pully on squeezing out more, but from the looks of how much space there is to play with, it's not going to happen
SaggioSeattle WA, · Mar 24, 2009#188
Would in be bad to install the 1ZZFE TB when installing this Supercharger?
LtNoogieWest Hills, CA · Mar 24, 2009#189
Originally Posted by rpalai ↑
Can anyone suggest any place that I can hook up the gauge so I can read boost?

I am at my wita end with this. Thank you.
rpalai
This is where you tap into the intake manifold for a boost gauge.

Picture not included in this copy
KCALB SIRAYVirginia · Mar 24, 2009#190
that's a perty picture
eTiMaGoBangkok, Thailand · Mar 25, 2009#191
well it *is* a picture of a nipple... 😁
rpalaiFlorida, USA · Jul 9, 2009#192
CAN ANYONE OUT THERE PLEASE TELL ME HOW TO RE-SET THE S-MODEL (WITH TACH) DASH CLUSTER "MAINTAINANCE REQUIRED" LIGHT THAT COMES ON AFTER 10,000 MILES AND DOES SO AGAIN EVERY 5,000 MILES PER TOYOTA. EVEN THEY COULD NOT TELL ME HOW TO RE-SET IT. I could not find it in the owner's manual either.
PLEASE SEND ME A PM (MY USERNAME IS rpalai) or email me at rpalais@tampabay.rr.com

Thanks!
rpalai
rpalaiFlorida, USA · Jul 9, 2009#193
Hello out there. I know that many Yaris owners have installed the Blitz Supercharger system. I did so as well. Love it! Except, I have a question re. the fuel ecnomy afterwards. Now, I do expect some decrease in economy, but mine has REALLY dropped. Even driving it normally to light, my gas mileage has dropped by no less than 6 mpg. I just need to know if this is normal after installing a Blitz Blower and driving it light to normally? Switch is in low position all the time as it is most comfortable to drive that way.
Pls advise. Thanks!
RKP
cali yarisCanoga Park, CA · Jul 9, 2009#194
"low" means the s/c is on most of the time, if I understand correctly. Meaning, it comes on at a "lower" throttle position, or sooner.

what mileage do you get with it "off"?
PETERPOOPOahu · Jul 9, 2009#195
having it on "low" means it engages almost all the time. if you are running an entire tank with it switched on "low," don't be surprised you aren't getting good gas mileage. I would think maybe 24-28mpg?
kurokoma-kunmy own little world · Jul 10, 2009#196
How odd... since installing the s/c my mpg has gone up, though just 1-3 mpg on avg.
LtNoogieWest Hills, CA · Jul 11, 2009#197
I run mine on Medium and it only kicks in when I need the extra acceleration. What I don't like about the Low setting is that while I'm feathering the throttle to maintain speed, the clutch engages and disengages more than I would like.

My gas mileage in the Medium setting ranges from 32 mpg to 37 mpg a tank depending on the amount of freeway driving.