Yarisworld Archive

OMG MY K&N FILTER!!!

81 posts · 24,108 views · page 1 of 2

id3379Original postFeb 19, 2009#1
Doesn't feel/seem any different, but i wasn't expecting it to.

Anyway, the point of this thread is to see if anyone else has noticed some small performance gains (if any) or any gains in fuel economy.

What's your thoughts on it ? And I paid $50 after tax @ autozone for it.

Replies 80

TamagoOff Grid · Feb 19, 2009#2
congrats on your purchase. keep it clean, a clean filter is a must!

oh and don't waste money on the k&n cleaning kit. use simple-green to wash the filter and oil with a similar oil to the K&N kit
id3379Thread starterFeb 19, 2009#3
Originally Posted by Tamago ↑
congrats on your purchase. keep it clean, a clean filter is a must!

oh and don't waste money on the k&n cleaning kit. use simple-green to wash the filter and oil with a similar oil to the K&N kit
Thanks for the tip, i got some laying around the house, saved me some $ 👍
ArkhangelPuerto Rico · Feb 19, 2009#4
Originally Posted by Tamago ↑
congrats on your purchase. keep it clean, a clean filter is a must!

oh and don't waste money on the k&n cleaning kit. use simple-green to wash the filter and oil with a similar oil to the K&N kit
I havent Cleaned my K&N Yet 🙁 what kind of oil would that be exactly
toadbowser's castle · Feb 19, 2009#5
Originally Posted by Arkhangel ↑
I havent Cleaned my K&N Yet 🙁 what kind of oil would that be exactly
i'd be curious also to hear what type of oil people use instead? i've had k&n's on my past 2 vehicles and liked them, but hated paying what they charge for their 'recharge' kit. i haven't bought one for my yaris yet because i know you have to keep them clean and oiled to work(and avoid damage to your engine), but i just don't want to keep paying for that overpriced cleaning kit!
TamagoOff Grid · Feb 19, 2009#6
http://www.fastcycleparts.com/showpr...4756&aid=10050

is a good substitute.

any oil recommended for filter oiling, whether foam or fabric, will work.

regular motor oil does not have any "stickiness" to it and will not work.

do not over-oil your filter!

edit: also just read that bar and chain oil (for chainsaws) works if used in small quantities (not recommended for cold-weather applications)
PetersRedYarisThe Black Hills of South Dakota · Feb 19, 2009#7
Originally Posted by toad ↑
...i just don't want to keep paying for that overpriced cleaning kit!
Keep paying for them? One kit last for multiple cleanings, which only need to be done every 50,000 miles for regular street driving...
YaribhiniUSA · Feb 19, 2009#8
I can't think of a bigger waste of money than a K&N filter for a yaris. It has absolutely zero benefits and it's filtering capability is much, much worse than a paper element so you end up with a dirtier motor/throttle.
firemachine69Sudbury, On · Feb 19, 2009#9
Originally Posted by Yaribhini ↑
I can't think of a bigger waste of money than a K&N filter for a yaris. It has absolutely zero benefits and it's filtering capability is much, much worse than a paper element so you end up with a dirtier motor/throttle.
Yessir, but don't tell the Yaris fanatics that, how else would K&N make so much money? 😉
id3379Thread starterFeb 20, 2009#10
Originally Posted by Yaribhini ↑
I can't think of a bigger waste of money than a K&N filter for a yaris. It has absolutely zero benefits and it's filtering capability is much, much worse than a paper element so you end up with a dirtier motor/throttle.
i've already noticed a tad bit better gas economy comparing results with my SG2, and considering it is lifetime guaranteed', by the time i change my filter twice with the gas ive saved after all those miles it will have paid for itself and more.
supmetSouthern California · Feb 21, 2009#11
When i put the K&N drop in, the yaris felt slightly better/quicker, but not a whole lot. Also seemed smoother on the freeway, its been so long now I can hardly remember though.

As for filtering efficiency, I have a few questions. I checked out a few websites, but can't find any definitive answers. Does anyone have a link to lab results, or measurements of dust and dirt that passed through different types of filters on the same engine? K&N says they filter 99% as much as paper, but i can't imagine 1% extra dust over 200k miles being good. I'd also be interested in seeing some numbers on filtration for cold air intakes, as that might be my next move. But a lot of people seem to think I'd be best off to just put the stock paper back in..

(I've read every viewpoint based on hearsay pertaining to this - that's not what I'm looking for. I need concrete test results of different types of filters(and the crazy guy taking pictures of filters after 500 miles doesn't count :P )
blacksandiegovitzJust chillin' out brah ! · Feb 21, 2009#12
Originally Posted by Yaribhini ↑
I can't think of a bigger waste of money than a K&N filter for a yaris. It has absolutely zero benefits and it's filtering capability is much, much worse than a paper element so you end up with a dirtier motor/throttle.
Um, no ...
K&n filtration/cfm flow is the highest of any aftermarket filter(many winning baja/off-road/track vehicals used k&n filters) . I'm running a k&n drop-in but I hacked my stock air box and flipped it upside down , so the filter is facing up . I also have a vented hood, so its getting air from outside the engine bay , so in my application its works just as good as any sri for 30 bucks . I could see how you dont notice any gains with the filter in stock configuration .
id3379Thread starterFeb 21, 2009#13
Originally Posted by blacksandiegovitz ↑
Um, no ...
K&n filtration/cfm flow is the highest of any aftermarket filter(many winning baja/off-road/track vehicals used k&n filters) . I'm running a k&n drop-in but I hacked my stock air box and flipped it upside down , so the filter is facing up . I also have a vented hood, so its getting air from outside the engine bay , so in my application its works just as good as any sri for 30 bucks . I could see how you dont notice any gains with the filter in stock configuration .
wow that's a interesting idea, can you take pics of your set up ?
id3379Thread starterFeb 21, 2009#15
Originally Posted by blacksandiegovitz ↑
thanks buddy, thats a creative set up, where did you sang your sexi CF valve cover ? :O

*EDIT: sorry, read your other post and saw you got it from garm
whiteghettoportland oregon · Feb 24, 2009#16
I have a hi flow filter with a cut airbox and have noticed better MPG and higher RPM performance
1stToyotaOklahoma · Feb 24, 2009#17
Originally Posted by Yaribhini ↑
I can't think of a bigger waste of money than a K&N filter for a yaris. It has absolutely zero benefits and it's filtering capability is much, much worse than a paper element so you end up with a dirtier motor/throttle.
One problem with the increased airflow, doesn't the MAF meter just readjust for it?

And if I had one I'd be worried about either using too much oil or not enough. I've been told that they can't harm your MAF but I know that's not always so. A Toyota Avalon owner had a brand new K&N dropin that must have been over-oiled enough that it set a code and couldn't get much over 50% calculated engine load at WOT, until I cleaned the MAF and switched to a WIX filter...code didn't come back and saw well over 80% calculated engine load at WOT on my scanner's datastream.

Maybe someday GreenFilter will come out with a P/N for our Yaris. Similar to a K&N, just a little different approach.
ChinoCharlesOH · Feb 24, 2009#18
Dogging on K&N is a popular thing to do because they're so big, but here in Ohio we have these things called race tracks and guess what filters they use on the cars? 😆 K&N's are tried and tested. I don't run one, but I wouldn't hesitate to.

Oh, and they stand up extremely well to wear and tear. My friend has one that he has been running for 150,000 miles and it looks to be in better shape than my generic, which I've had about 25% as long.
metalsharkMesa, AZ · Feb 24, 2009#19
I've been running K&Ns on the big V-8s for years. I clean them once a year and re-oil. On my truck its a whopping 14" diameter by 6" tall so I never have a measurable restriction even when its caked on. Typically these types of filters do a better job of cleaning the air after they are dirty up to a point. I've had the big trunicated cone type on a CAI inside the left front filter for one year now. Its been in there for 20,000 miles so its time.
QmobileHoytville, ohio · Feb 24, 2009#20
yeah and I like my TRD one witch I think is the same thing as a K&N right? Ever since I put it in I noticed a tad more umph! not much though
TamagoOff Grid · Feb 24, 2009#21
Originally Posted by Qmobile ↑
yeah and I like my TRD one witch I think is the same thing as a K&N right? Ever since I put it in I noticed a tad more umph! not much though

here's the umph curve


miniscule------------------------tad----------------------VTEC!! MMMMMMMMMBAAAAAAAAAAAHHHHH!!!!!
bzinn 1University Place,WA · Feb 25, 2009#22
be careful with the oil,it can gunk up the MAF really quick and give you a CEL.
Doug007California · Feb 25, 2009#23
Originally Posted by PetersRedYaris ↑
Keep paying for them? One kit last for multiple cleanings, which only need to be done every 50,000 miles for regular street driving...
+ 1...I have K&N's in my Sequoia, TSX and Yaris. I've made the cleaner kit last several years. I agree on being cautious with over-oiling.

In terms of performance gains, it's hard to tell. I do exceed the EPA mileage on all three cars.
1stToyotaOklahoma · Feb 25, 2009#24
Originally Posted by bzinn 1 ↑
be careful with the oil,it can gunk up the MAF really quick and give you a CEL.
And that intial 1hp at the wheels (until the PCM adjusts for the extra airflow that it now sees) that you think you're feeling because you're driving more aggressive to hear the extra noise being made under the hood can quickly turn into about a 20hp loss at the wheels when the MAF gets gunked enough to set a code.
thebarberGrand Rapids, MI · Feb 25, 2009#25
Originally Posted by 1stToyota ↑
And that intial 1hp at the wheels (until the PCM adjusts for the extra airflow that it now sees) that you think you're feeling because you're driving more aggressive to hear the extra noise being made under the hood can quickly turn into about a 20hp loss at the wheels when the MAF gets gunked enough to set a code.
only way it gunks up the maf is if its waaay over oiled. i had k&n oiled filter on my xrs and never had a problem w/ an oiled maf even running to 8350rpm...

its a common misconception that an oiled filter with screw up your maf....its gross user error to have that happen...

as for the hp increase...im sure its almost negligible in the yaris....but the ecu doesnt compensate in the way youre describing, otherwise you would never feel any power increase for any mods done on a stock ecu...and thats just not the case.

how much are those stock paper filters? for me, id rather spend the $50 on 1 k&n and never have to spend money on cruddy, restrictive paper filters
1stToyotaOklahoma · Feb 25, 2009#26
Originally Posted by thebarber ↑
only way it gunks up the maf is if its waaay over oiled. i had k&n oiled filter on my xrs and never had a problem w/ an oiled maf even running to 8350rpm...

its a common misconception that an oiled filter with screw up your maf....its gross user error to have that happen...

as for the hp increase...im sure its almost negligible in the yaris....but the ecu doesnt compensate in the way youre describing, otherwise you would never feel any power increase for any mods done on a stock ecu...and thats just not the case.

how much are those stock paper filters? for me, id rather spend the $50 on 1 k&n and never have to spend money on cruddy, restrictive paper filters
HP gains come from real mods, followed by a dyno tune. Try putting a cam, heads and LTs on a LS-1 motor w/o a tune. You'll be lucky if you can back down the drive until it's tuned, and then you'll see 100 or so extra hp at the wheels. And the PCM works exactly like I said...the MAF measures AIRFLOW, that's why a car will still stay running even when the paper element can be completely clogged with dust, trash, dragonfly legs, bird feathers, etc...

And it kinda depends on the location of the MAF, if it's real close to the airbox better chance of catching non-100% air across its heated wires. I'd say it's not a misconception when TSBs are issued on oiled filters.

K&N (drop-ins) is great for saving money but not for HP gains, maybe 1 or 2 hp at the wheels of most applications, at best. Probably saw better gains back when they first came out and was installed in bigblocks with hi-rise manifolds and dbl-pumpers, but now cars are getting too smart for minor mods w/o reflashes.
GiobateraCoral Springs, FL · Feb 25, 2009#27
The bottom line is simple to understand. As "thebarber" said, it doesn't take much to figure this out. WHY spend $ on cheap quality paper filters every couple months, if you can just get something that will less you a eternity for less then $50.00 bucks? Even IF you don't see any significant changes as some of you described previously, just the fact the you don't have to keep buying these filters over and over again, pays for itself.
Now, use your best judgement!
1stToyotaOklahoma · Feb 25, 2009#28
In a perfect world no one will ever over-oil their filter, and if they do they'll always be smart enough to clean the MAF and have a code reader to see the MAF code and not have to pay a mechanic to read the code and clean the meter at a pricely sum, if the mechanic doesn't decide to make a MAF sale instead of just cleaning it. 50$ investments can get quite expensive.

had to be a need

...and paper filters are good for 15k miles, a year or more for most, not every 2 months
thebarberGrand Rapids, MI · Feb 25, 2009#29
ya, i agree....no gains even on the butt-dyno...i have one in the yaris and it still chokes past 5500 or 6000rpm - - i just bought it because i hate paying a toyota tech to install new paper filters when i can run w/ a k&n and clean it myself...

gains would be easier to get on larger displacement engines too....though i talked my dad into a k&n filter on his 3.8L (or is it 3.9?) v6 gmc sierra (2006, iirc) and i couldnt really feel a difference...but he says he gets a couple more mpg now...
anonymous userwindward oahu · Feb 25, 2009#30
I have a K&N airhog on my wrx for the past 5 years with no ill-effects. Like ChinoCharles stated, it's a race car, so whatever.
I got a Blitz LM intake on my yaris, and it seems to do the trick just fine. If I had'nt got it, I'd be rocking a K&N filter.
You haters are overanalyzing the situation. It's not like were talking about crank pulleys that throw off your harmonic balancer. They make balanced ones for race cars, but they cost 4x as much. IT is safer, as you have much more invested in the motor should it crap on you.
1stToyotaOklahoma · Feb 25, 2009#31
Originally Posted by thebarber ↑
ya, i agree....no gains even on the butt-dyno...i have one in the yaris and it still chokes past 5500 or 6000rpm - - i just bought it because i hate paying a toyota tech to install new paper filters when i can run w/ a k&n and clean it myself...

gains would be easier to get on larger displacement engines too....though i talked my dad into a k&n filter on his 3.8L (or is it 3.9?) v6 gmc sierra (2006, iirc) and i couldnt really feel a difference...but he says he gets a couple more mpg now...
Did it always choke past 5,500 rpms? Giving K&N their due credit, if you're going to notice an improvement that's where the car should feel better than it did before with the paper element.

At the risk of looking like a jerk 😳 it might be worth about 10 minutes of your time, a q-tip and some rubbing alcohol (or the CRC cleaner), because loss of top-end power sometime means dirty MAF. All you need is a small phillips screwdriver to remove the 2 screws. No harder to do then replacing the air filter. Might be worth giving it a try to see if that improves the top-end acceleration.
1stToyotaOklahoma · Feb 25, 2009#32
Originally Posted by anonymous user ↑
I have a K&N airhog on my wrx for the past 5 years with no ill-effects. Like ChinoCharles stated, it's a race car, so whatever.
I got a Blitz LM intake on my yaris, and it seems to do the trick just fine. If I had'nt got it, I'd be rocking a K&N filter.
You haters are overanalyzing the situation. It's not like were talking about crank pulleys that throw off your harmonic balancer. They make balanced ones for race cars, but they cost 4x as much. IT is safer, as you have much more invested in the motor should it crap on you.
I'm not hating K&N, just saying that MAFs get dirty enough to need cleaning, even when someone isn't using oiled elements, so going oiled just increases the risk. And I know because most of the tuneups that I do the MAF meter (w/ paper filter installed) is a lot nastier than the iridium and platinum plugs that I pull out with over 100k miles on them.
thebarberGrand Rapids, MI · Feb 25, 2009#33
i found in a stock yaris the power just isnt there to redline...maybe 6000rpm is more accurate....maf might need cleaning too at this point....but i figure ill wait till spring....

i find with a proper intake the power runs to redline....
anonymous userwindward oahu · Feb 25, 2009#34
Originally Posted by 1stToyota ↑
I'm not hating K&N, just saying that MAFs get dirty enough to need cleaning, even when someone isn't using oiled elements, so going oiled just increases the risk. And I know because most of the tuneups that I do the MAF meter (w/ paper filter installed) is a lot nastier than the iridium and platinum plugs that I pull out with over 100k miles on them.
I wasn't singling you out specifically, but i agree with your points. 😉
I've never had a problem with the maf getting clogged up with oil, but have had carbon buildup problems with the IAT sensor on my wrx, and also water coming in the fenderwell clogging my filter after like 90 straight days of rediculous rainstorms.
id3379Thread starterFeb 26, 2009#35
K&N Drop in Filter FTW!
YaribhiniUSA · Feb 26, 2009#36
Interesting that almost everybody missed the point that I tried to make and that is not that the K&N flows less than paper media, it is that it does so at the cost of filtration. A K&N let's more in which constitutes a dirtier motor and throttle body. I'd love to hear the arguments for needing more airflow for this 100hp air pump. Please don't kid yourself into thinking that the K&N is giving you better results. The only think that it's doing is making your motor and throttle dirtier.

Chino,
I assume you have your Yaris on the track often? That K&N filter must have you blowing by all the Porsche's and BMW's!?

C'mon guys, stock paper media is where it's at with this Yaris. That's a "no brainer."
1stToyotaOklahoma · Feb 26, 2009#37
Originally Posted by Yaribhini ↑
Interesting that almost everybody missed the point that I tried to make and that is not that the K&N flows less than paper media, it is that it does so at the cost of filtration. A K&N let's more in which constitutes a dirtier motor and throttle body. I'd love to hear the arguments for needing more airflow for this 100hp air pump. Please don't kid yourself into thinking that the K&N is giving you better results. The only think that it's doing is making your motor and throttle dirtier.

Chino,
I assume you have your Yaris on the track often? That K&N filter must have you blowing by all the Porsche's and BMW's!?

C'mon guys, stock paper media is where it's at with this Yaris. That's a "no brainer."
Is that what the stock Denso filter is made out of? I thought it was a recycled egg carton.😉

It was too wierd looking for me so I went with the Beck/Arnley paper filter and got impressed, real quick! 😳
jaserhunterNC · Feb 26, 2009#38
if K&N is sooo bad for your car then why do so many people still buy them? and are you guys really fighting over this.



come on..... really cause everyone knows that


K&N is the best lol 😛
ChinoCharlesOH · Feb 26, 2009#39
Chino,
I assume you have your Yaris on the track often? That K&N filter must have you blowing by all the Porsche's and BMW's!?
No, but my argument is that if they work on 600+ HP drag cars, I think they're good enough for my econobox.

Hey, don't listen. Go spend 20 bucks on a paper filter once every 6 months or a year. I'll still have my K&N in 10.

If you say K&N filters let more dirt in, you're just flat out wrong. You're arguing an invalid point. The world is flat, too, right? Come on now. It is an oiled filter. It operates on different principles, but the end result is simple.

And another thing... (😆) every K&N filter you'll ever buy is going to increase the surface area of the filter element over stock. HELLO? Should I keep going?
ChinoCharlesOH · Feb 26, 2009#40
http://www.knfilters.com/air_filter_testing.htm

^^ The shut up button.

AND I QUOTE

We are aware of the “urban myth” (K&N News Story) created by a few dealerships that a vehicle's MAF sensor can be contaminated by K&N filter oil. No evidence has ever been provided to support this “myth” and three years of diagnostic testing by K&N has shown that not only is this allegation not real, it is not even possible. In our opinion, it is an excuse for a dealership and/or the vehicle manufacturer to avoid a legitimate warranty repair. In the last 4 years, we have sold over 10,000,000 lifetime air filters and received only a few hundred calls from consumers who are having dealership or service provider challenges. We believe that Dealership's or service provider's real incentive may be to discourage the use of reusable products so they can sell disposable products over and over. In order to provide consumers with added comfort that they will not be placed in a bad position by an improper warranty denial, we offer our Consumer Protection Pledge.
Pop quiz: What element of the Yaris's MAF could POSSIBLY get dirty enough to cause issues?
PetersRedYarisThe Black Hills of South Dakota · Feb 26, 2009#41
Originally Posted by Yaribhini ↑
Interesting that almost everybody missed the point that I tried to make and that is not that the K&N flows less than paper media, it is that it does so at the cost of filtration. A K&N let's more in which constitutes a dirtier motor and throttle body. I'd love to hear the arguments for needing more airflow for this 100hp air pump. Please don't kid yourself into thinking that the K&N is giving you better results. The only think that it's doing is making your motor and throttle dirtier.
You are actually wrong... Paper filters let very fine dust right through that coats the inside of the intake tube and can easily be seen when replacing the filter. An oiled media on the other hand catches all that fine dust and traps it. The inside of the intake tube on my Tacoma looked like it was removed from a brand new truck, and that was after 50,000 miles without cleaning the K&N. Trust me, they work, even in harsh conditions...

As for the MAF, I have personally over oiled a K&N filter and caused a CEL. But cleaning the MAF is SIMPLE (using CRC MAF cleaner, don't EVER touch the element with a q-tip) and disconnecting the battery resets the light. No harm done.

Compared to a stock paper filter, K&N's are better in every way...
ddongbaphay · Feb 27, 2009#42
Since Toyota would have filters that'll damage their engines in the long run. Or maybe fine dust DOESN'T MATTER?
firebird1999usGeorgia · Feb 27, 2009#43
Originally Posted by PetersRedYaris ↑
Keep paying for them? One kit last for multiple cleanings, which only need to be done every 50,000 miles for regular street driving...
I've had my cleaning kit for like 10+ years and have cleaned filters like 10 times with it...I've got like half a container left of the cleaner and oil too🤷
ddongbaphay · Feb 27, 2009#44
Originally Posted by ChinoCharles ↑
http://www.knfilters.com/air_filter_testing.htm

^^ The shut up button.

AND I QUOTE



Pop quiz: What element of the Yaris's MAF could POSSIBLY get dirty enough to cause issues?
Not that I'm trying to disprove this or anything, then what causes brand new MAFs to fail?
1stToyotaOklahoma · Feb 27, 2009#45
Originally Posted by ChinoCharles ↑
[URL]

Pop quiz: What element of the Yaris's MAF could POSSIBLY get dirty enough to cause issues?
You've never looked at one? It's not a hollow tube. Noticed the wire harness that plugs into it?
MUSKOKA800Chatham, Ontario, Canada · Feb 27, 2009#46
I've had great success with K&N's over the years with no MAF issues. Here's my process;
Remove K&N drop-in
Re-install original OEM filter (which was nearly new when initially removed)
Remove any litter (bugs etc) from the dirty side with a soft brush.
Using K&N cleaner from kit, thoughtly soak and back-flush the K&N filter with warm tap water.
Shake off excess water and air dry overnight.
Next day (when 100% dry), spray both sides liberally with K&N filter oil ensuring that all pleats are moistened.
Lay filter on paper towelling for a couple hours to drain any surplus oil.
Wipe excess oil from filter frame and re-install in stock airbox.

The K&N service kit suggests cleaning be done at 50,000 to 100,000 mile intervals (for on-road use).
I do so annually which is approximately 25,000 kilometers (~15,500 miles)
I recently cleaned the filter after 27,000 kl. in my Yaris Sedan. It was much cleaner that past K&N's I've used which were cone types on K&N intake systems (Turbo-Talon, 5.0 Mustang). Could be that 1.5 hp doesn't draw the same volume of air as 200+ hp plus the Yaris filter has been protected inside the airbox with dirt only being drawn in from the bottom, whereas the cone filter are exposed to all dirt flying about the engine compartment, not just that pulled up to it by engine vacuum.
1stToyotaOklahoma · Feb 27, 2009#47
Originally Posted by PetersRedYaris ↑
As for the MAF, I have personally over oiled a K&N filter and caused a CEL. But cleaning the MAF is SIMPLE (using CRC MAF cleaner, don't EVER touch the element with a q-tip) and disconnecting the battery resets the light. No harm done.
It's an approved cleaning method on Identifix, unless someone isn't born with dexterity and nerve endings, and is real sloppy.

Compared to a stock paper filter, K&N's are better in every way...
Paper doesn't invite gunk buildup on the MAF quite as well, causing a 10-20hp loss at the wheels instead of about 1hp gain at the wheels, if you're lucky.
1stToyotaOklahoma · Feb 27, 2009#48
Originally Posted by ChinoCharles ↑
No, but my argument is that if they work on 600+ HP drag cars, I think they're good enough for my econobox.

Hey, don't listen. Go spend 20 bucks on a paper filter once every 6 months or a year. I'll still have my K&N in 10.

If you say K&N filters let more dirt in, you're just flat out wrong. You're arguing an invalid point. The world is flat, too, right? Come on now. It is an oiled filter. It operates on different principles, but the end result is simple.

And another thing... (😆) every K&N filter you'll ever buy is going to increase the surface area of the filter element over stock. HELLO? Should I keep going?
I've never ran codes on a 600+ HP drag car

Sounds like you pulled the trigger on a K&N filter since the 24th! 🎉
ChinoCharlesOH · Feb 27, 2009#49
Pop quiz: What element of the Yaris's MAF could POSSIBLY get dirty enough to cause issues?

A: The mirror!

Yarii have a Karman Vortex-style MAF. It works via a mirror located in the stalk of the sensor. Air is redirected up the stalk and against a tiny little mirror, and the oscillations of that mirror are measured via a photoreceiver that receives LED light that is reflected off the mirror.

SO, you guys are telling me that oil from a filter is going to make it all the way up the stalk of the MAF, contaminate it, and then the filter is going to let in enough dirt (which is also magically going to take a trip up the stalk of the sensor) and ruin it, too?

No, it won't. That is why Toyota uses these MAF's and have for decades. They are reliable. That is to say nothing of the fact that properly installed oiled filters do nothing to air flow sensors in the first place.

You guys are arguing urban legend. It comes up here about once a year, and it gets shot down every single time.
TamagoOff Grid · Feb 27, 2009#50
:insert beating the dead horse .gif here: