Yarisworld Archive

How do I cure a lean condition?

100 posts · 31,501 views · page 1 of 2

LtNoogieOriginal postWest Hills, CA · Jan 31, 2009#1
What's my next step? It appears that with the Blitz supercharger and its piggyback fuel controller, I'm running lean.

Should I swap in larger injectors? The piggyback fuel controller is not adjustable so I cannot change the duty cycle any further.

Before: air/fuel mixture ran between 11.35 and 13.6

After: air/fuel mixture ran between 13.45 and 14.91

1 attachment not included in this copy

Replies 99

PHXDEMONPhoenix, AZ · Jan 31, 2009#2
I would say bigger injectors as a first step. Maybe an upgraded fuel pump as well 🤷
TamagoOff Grid · Jan 31, 2009#3
Originally Posted by PHXDEMON ↑
I would say bigger injectors as a first step. Maybe an upgraded fuel pump as well 🤷

fuel pump is fine

bigger injectors would definitely help. source a set from a celica gts or a scion tC (i run tC injectors) you can find them both for cheap (i got mine for free, make friends with a service tech at toyota)


until then, STAY OUT OF BOOST, you're gonna blow your engine running lean like that on boost.
Nexus1155Dorchester · Jan 31, 2009#4
Whats the duty cycle like on the injectors already?

if you don't have the ability to change the constant of the injectors with the controller, make sure you scale properly so you wont have to do too many adjustments.
ddongbaphay · Jan 31, 2009#5
Lean is no good.
cali yarisCanoga Park, CA · Jan 31, 2009#6
Just curious, why were the two dynos done in different gears?

Call Blitz USA. THAT is the first thing to do. Show them the problem. If you further modify your car to fix something that should be working properly in the first place, they are not going to be helpful at all.

You could also share on here under what conditions your getting those readings:

Idle cold =
Idle warm =
Boost off, light pedal =
Boost off, WOT =
Boost on, light pedal =
Boost on WOT =

The Blitz r-Vit gives some control over air/fuel. Maybe they'll give you one. 🙂
thebarberGrand Rapids, MI · Jan 31, 2009#7
hard to say what to do...is it your fuel injectors being maxed out or the blitz ecu being unable to cope with the s/c AND i/h/e?
TamagoOff Grid · Feb 1, 2009#9
Originally Posted by thebarber ↑
hard to say what to do...is it your fuel injectors being maxed out or the blitz ecu being unable to cope with the s/c AND i/h/e?
well, considering the xB GREDDY turbo kit does not upgrade injectors, i would guess that stock inj should handle the duty cycle just fine on an SC application 🤷


http://www.rceng.com/technical.aspx
TamagoOff Grid · Feb 1, 2009#11
Originally Posted by LtNoogie ↑
I don't know what that had to do with this thread but I enjoyed the mix.
the captain obvious "lean is no good" post.... i figured i'd add my own "obvious" post.


the remix is good because snoop is in it.. snoop can fix any crappy song
LtNoogieThread starterWest Hills, CA · Feb 1, 2009#12
Originally Posted by Tamago ↑
well, considering the xB GREDDY turbo kit does not upgrade injectors, i would guess that stock inj should handle the duty cycle just fine on an SC application 🤷


http://www.rceng.com/technical.aspx
I've actually not had any problems with detonation so today's readings surprised me. This gives me more incentive to get off my ass and install my wideband a/f gauge. I sent a message to yarisdarkness, who works for Blitz, since their website does not list a email address.
TamagoOff Grid · Feb 1, 2009#13
Originally Posted by LtNoogie ↑
I've actually not had any problems with detonation so today's readings surprised me. This gives me more incentive to get off my ass and install my wideband a/f gauge. I sent a message to yarisdarkness, who works for Blitz, since their website does not list a email address.
make sure and install the wideband PRE cat..

what did you buy? i have an innovate LC1
LtNoogieThread starterWest Hills, CA · Feb 1, 2009#14
Originally Posted by Tamago ↑
make sure and install the wideband PRE cat..

what did you buy? i have an innovate LC1
I screwed up and had the bung welded on after the first cat because I did not want to pay to have the muffler shop drop the front of the midpipe to put a bung near the header. I'll bite the bullet and have them do it correctly. The first bung is currently plugged.

I have an Autometer C2 with digital LED readout and the colored LEDs running across the outside edge. I also have a C2 Vacuum/Boost gauge.

I've been putting off installing them because I hate running cables into the car.
TamagoOff Grid · Feb 1, 2009#15
Originally Posted by LtNoogie ↑

I've been putting off installing them because I hate running cables into the car.
me too man.. when i ran the boost line to the AEM unit i wanted to kill myself.

how long is the wire from the actual o2 sensor to the "brain" unit? the LC1 is super short, i had to really fight with mine to get it in place. it now resides in the passenger footwell, doublesided taped to the "tunnel"

i just noticed i use " " a lot 🙁
LtNoogieThread starterWest Hills, CA · Feb 1, 2009#16
Unless I'm missing something, the O2 sensor is on a 1 foot harness with a connector at the end. A 9 foot harness goes between it and the meter itself.

The data logger in the pdf file does not come with the kit.

1 attachment not included in this copy

TamagoOff Grid · Feb 1, 2009#17
Originally Posted by LtNoogie ↑
Unless I'm missing something, the O2 sensor is on a 1 foot harness with a connector at the end. A 9 foot harness goes between it and the meter itself.

The data logger in the pdf file does not come with the kit.

1 foot is really , really short.

you'll probably want to have the bung welded near where the shift linkage comes thru the tunnel, then route the cable thru that cover and put the "brain" up under the center console.
LtNoogieThread starterWest Hills, CA · Feb 1, 2009#18
Really really short. I need to jack up the car (onto stands of course), crawl underneath, and figure out the routing long before I take it to the muffler shop. There's a car stereo shop right next to them. I'm tempted to ask the installers if they'll run the cables on the side for cash.

Are the entry points on an AT the same as a MT?
TamagoOff Grid · Feb 1, 2009#19
Originally Posted by LtNoogie ↑
Really really short. I need to jack up the car (onto stands of course), crawl underneath, and figure out the routing long before I take it to the muffler shop. There's a car stereo shop right next to them. I'm tempted to ask the installers if they'll run the cables on the side for cash.

Are the entry points on an AT the same as a MT?
yes, the same place. it should be a plate held by two bolts that the cable passes thru. my suggestion is to drill a hole in that plate, off to one side, and install a rubber grommet that you can put your wire thru.

while you're under the car, you wont' be able to see this plate without removing the exhaust heat shield. you should be able to unbolt it and slide it to the side past your exhaust and then you'll see the plate that is part of the shift cable.
LtNoogieThread starterWest Hills, CA · Feb 1, 2009#20
Hey, thanks for the tips.
TamagoOff Grid · Feb 1, 2009#21
Originally Posted by LtNoogie ↑
Hey, thanks for the tips.
no problem. i'm here to help! nom nom nom nom
Nexus1155Dorchester · Feb 1, 2009#22
I'm running an LM-1 with an exhaust pickup and it goes on the end of the tailpipe.... the only way it reads off is when it gets gas or water in there, or when there is free air. But at any exhaust flow it reads spot on.... I dont think installing it post-cat by accident will give you that drastic of a change in readings when at WOT
botchilahPhilippines · Feb 2, 2009#23
The further away your o2 sensor is, the slower the response time but I think it's ultimately fine wherever you put it. A lot of dynos mount the wide-band o2 sensor at the exhaust tips anyway.
TamagoOff Grid · Feb 2, 2009#24
Originally Posted by botchilah ↑
The further away your o2 sensor is, the slower the response time but I think it's ultimately fine wherever you put it. A lot of dynos mount the wide-band o2 sensor at the exhaust tips anyway.
that's for convenience and quick change-out. it's def not as accurate. most factory turbo cars put the o2 sensor within a foot of the turbo hotside outlet.
Return of the YariiNaperville, IL · Feb 2, 2009#25
that's for convenience and quick change-out. it's def not as accurate
NOT true at all


most factory turbo cars put the o2 sensor within a foot of the turbo hotside outlet.
irrelevant
LtNoogieThread starterWest Hills, CA · Feb 2, 2009#27
Originally Posted by whooppee777 ↑
new/used scion tc injectors
Thanks, now I have to find out how much the dealership wants for new ones so that I can tell whether this is a good price.
botchilahPhilippines · Feb 3, 2009#28
Originally Posted by Tamago ↑
that's for convenience and quick change-out. it's def not as accurate. most factory turbo cars put the o2 sensor within a foot of the turbo hotside outlet.
Not as accurate? Then that means almost all cars being dyno'd should have blown up already if the o2 sensor isn't accurate :) I had a dyno'd car that ran fine for 9 years (old Evo) and the o2 sensor was mounted on the exhaust tip on a Dynojet 248C AWD dyno.

Experts please do chime in as I myself want to know exactly how things work.

It's not an apples to apples comparison when you compare the o2 sensor in an OEM application to an o2 sensor that's a wideband, 5, 6, 7 wire sensor used for tuning.

The widebands are far more sensitive and I believe either operate at higher voltages or have better clarity reading in micro or mini-volts (whatever the correct term).
thebarberGrand Rapids, MI · Feb 3, 2009#29
pretty sure you want to mount widebands close to the exhaust manifold or turbo as you can and not at the exhaust tip, because you get a more accurate reading that way...ive never heard of a serious tuner mounting it anywhere else
largeorangefontSo Cal, OC · Feb 3, 2009#30
Do not waste your time putting in different injectors at this point. Get in contact with Blitz, and get your wideband in so you can see the results for yourself. If you have a problem, then you can work on it from there. Throwing parts at it when you have no means of gathering information will only make your problems worse.

As far as monting the sensor, mounting it precat is fine and above 9 o'clock and 3 o'clock on the pipe. You don't need to mount it precat, but that is where the sensor will live the longest and give the quickest readings.
ka0sxCA east bay · Feb 3, 2009#31
........... the first sensor is placed before the cat for one reason its hotter (these sensors need heat to activate all new sensors are preheated, but still the point is the same) the 2nd is placed after cat for Lambda calc, to check cat efficiency.

mounting a wideband post cat is like playing with yourself, the numbers are skewed as the unburnt fuel is burned and the excess 02 consumed.
TamagoOff Grid · Feb 3, 2009#32
Originally Posted by botchilah ↑
It's not an apples to apples comparison when you compare the o2 sensor in an OEM application to an o2 sensor that's a wideband, 5, 6, 7 wire sensor used for tuning.
were you not aware that most turbo cars now have 5wire wideband sensors from the factory?
cali yarisCanoga Park, CA · Feb 3, 2009#33
My post was ignored. I feel sad.
1NZYaris1New Zealand · Feb 3, 2009#34
Originally Posted by cali yaris ↑
My post was ignored. I feel sad.
It's alright we still u though
LtNoogieThread starterWest Hills, CA · Feb 3, 2009#35
Originally Posted by cali yaris ↑
My post was ignored. I feel sad.
I did not quite understand it. I did write to Yarisdarkness and asked him to contact Blitz engineering. I gave him the link to this thread so that he can download the text file.
eTiMaGoBangkok, Thailand · Feb 4, 2009#36
come on guys this is pointless now.. Let's stay on topic, courteous and constructive? We all have a lot to learn here.
whooppee777Maryland · Feb 4, 2009#37
update please
whooppee777Maryland · Feb 5, 2009#38
my stock afr sensor is moved away from my nitto midpipe to prevent it from reading crazy readings because of not having a cat. and i monitor the readings through my blitz r-vit and i took a look at it last night. it was reading 14 all the time and i my eyes immediately exploded but then i remembered i moved my sensor away from the pipe with a spacer.

anyways the point is i have been getting readings of 14.such and such for months and the ecu has never set a code saying its running lean
LtNoogieThread starterWest Hills, CA · Feb 5, 2009#39
If it isn't raining too hard tomorrow, I'll see about routing the wideband harness through the firewall. I was going to clamp it to the end of my tailpipe to take a reading but remembered that on the automatic, the S/C does not engage in Park or Neutral so I'd only be reading NA operation.
LtNoogieThread starterWest Hills, CA · Mar 15, 2009#40
I finally got my vacuum/boost gauge and wideband a/f gauges installed and working. I really don't see a lean condition according to the wideband until I go into DFCO. According to the Autometer paperwork, I'm spending most of my time in a stoichiometric range.

Sometimes after WOT and releasing the throttle, the a/f mixture will briefly go rich. Perhaps there has never been a problem.

This video has been cross-posted in another thread. You won't want to watch it again.

http://www.youtube.com/watch?v=05RZSyraA5Y
LtNoogieThread starterWest Hills, CA · Mar 15, 2009#41
Originally Posted by camelll ↑
How far back from the manifold is your a/f sensor or do you have egt?
It's still in the same spot between the two cats. It was a real PITA to arrange for the car to be lifted and the stereo guy drill a hole in the floorboard. It was too hard to get the muffler shop to put in another bung closer to the header while the stereo guy was standing around. Luckily the two shops are next to each other.

There's been all kinds of debate on this thread about whether the further back you have the wideband sensor affects the reading or whether it affects the lag time between throttle and the reading. Seeing as how the dyno guy read from my tailpipe, where I have the sensor now is fine by me.

What I don't get is that from the a/f readings I got before the S/C, I was actually running a little rich during WOT. The S/C puts me right in the middle now.
largeorangefontSo Cal, OC · Mar 15, 2009#42
Originally Posted by LtNoogie ↑
What I don't get is that from the a/f readings I got before the S/C, I was actually running a little rich during WOT. The S/C puts me right in the middle now.

That is typical. All cars come from the factory tuned on the rich side.
AlexNet0Rockland, ME · Mar 15, 2009#43
correctumundo^
PHXDEMONPhoenix, AZ · Mar 15, 2009#44
Originally Posted by Tamago ↑
fuel pump is fine

bigger injectors would definitely help. source a set from a celica gts or a scion tC (i run tC injectors) you can find them both for cheap (i got mine for free, make friends with a service tech at toyota)


until then, STAY OUT OF BOOST, you're gonna blow your engine running lean like that on boost.
I just assumed something the size of a D cell battery would be stressing 😆
largeorangefontSo Cal, OC · Mar 16, 2009#45
I just watched the Youtube video. It looks too lean under boost, unless the timing has been retarded by the SC adjustment box (which could be the case). The first cat is not falsifying your AFR readings much. Clearly your wideband is very close to accurate because you are seeing 14.6 AFR during cruise.

Only way to tell for sure would be to datalog the timing, or get an EGT gauge, or both. Either way, the car would benefit from a tune, probably in the neighborhood of 15-20 HP.
LtNoogieThread starterWest Hills, CA · Mar 16, 2009#46
Really? So the dyno guy was correct? Where would one find the optimum a/f readings for engines under boost?
largeorangefontSo Cal, OC · Mar 16, 2009#47
Originally Posted by LtNoogie ↑
Really? So the dyno guy was correct? Where would one find the optimum a/f readings for engines under boost?
There is a balance, and the key is really exhaust gas temperature, or EGT.

You can run a lean AFR, with retarted timing, and get acceptable EGT values.

You can run a richer AFR, with advanced timing and get the same acceptable EGT values.

The proper AFR for a forced induction car is debateable, but generally in the 11:1 -12:1 range is acceptable depending on type of forced induction and boost level.

I don't think blitz would send you out into the world with a tune that will pop the motor, but just be aware, the tune is far from its full potential.
largeorangefontSo Cal, OC · Mar 16, 2009#48
Originally Posted by camelll ↑
In between the cats or after the cats is not the optimal spot for the sensor, the instructions say: "If cast iron manifold(s) or shorty headers are used, install the sensor in the pipe just below the manifold."

We have been over what the instructions say. His setup is not optimal, but in this case it is fine. As you can see in the video, his wideband shows 14.6-14.8 AFR in closed loop conditions which we know is accurate.

It is showing high 13s low 14s under boost. While this may not be exactly accurate, the cat will not change the readings by a 2 full points.
largeorangefontSo Cal, OC · Mar 16, 2009#49
Originally Posted by camelll ↑
My sensor is right after the manifold pre cats and under wot I get between 11 and 12. I would think after the cat or cats his readings are okay.🤷
Well that is interesting...