Yarisworld Archive

Engine cover for S/C engine

85 posts · 25,875 views · page 1 of 2

LtNoogieOriginal postWest Hills, CA · Jan 17, 2009#1
This is one of the new MicroImage engine covers modified to fit a supercharged engine. We had to cut the front of the original cover to clear the blower and enlarge the oil cap hole to clear the larger Blitz oil cap.

My brother had the brushed aluminum anodized the same blue color to match my NST pulley set. Next we will etch some logos on the cover. We'll put MicroImage on there if Garm allows and maybe my brother's shop name.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 84

ztrack157Biggs, CA · Jan 17, 2009#2
Not bad noogie
coheedMaiden, NC · Jan 17, 2009#3
Your engine bay is a masterpiece. 🙇
TEHxFALLEN V1.2Calabasas, CA · Jan 17, 2009#4
THAT IS BEAUTIFUL!
eTiMaGoBangkok, Thailand · Jan 17, 2009#5
looks great, well done!
1NZYaris1New Zealand · Jan 17, 2009#6
WOW , that looks great , just need's a Noogie and Micro image logo to finish it off 🙄
pinoypizzaboylas vegas/ henderson · Jan 17, 2009#7
Very nice!!! Does the cover make buzzing noises after 4k rpms?
KCALB SIRAYVirginia · Jan 17, 2009#8
That's sick!
TreyzLong Island, NY · Jan 17, 2009#9
Nice and clean cut. Looks great!
SIPNGASSoutheast Wisconsin · Jan 17, 2009#10
Looks perfect there!
thebarberGrand Rapids, MI · Jan 17, 2009#11
good idea, looks super nice
KCALB SIRAYVirginia · Jan 17, 2009#12
Long, I really think you should do the braided steel hose now
Picture not included in this copy
m911gtChicago · Jan 17, 2009#13
Nice work Long! That looks awesome.
josevenezolanoVenezuela · Jan 17, 2009#14
Very Sweet!
ddongbaphay · Jan 17, 2009#15
Better looking than the valve cover + the nasty plug wires.
ddongbaphay · Jan 17, 2009#16
Originally Posted by echo_hrs ↑
Yummy, I want one for my SC in satin black...

Cheers
I'm gonna get mine in suede.
LtNoogieThread starterWest Hills, CA · Jan 17, 2009#17
Thanks guys!

Originally Posted by pinoypizzaboy ↑
Very nice!!! Does the cover make buzzing noises after 4k rpms?
I will be putting rubber moulding along the back edge to stop it from vibrating against the valve cover. Instead of moving the rubber bumpers from the plastic engine cover, we double-stacked some rubber washers underneath the engine cover and then used one more on top underneath the nut.

Originally Posted by ddongbap ↑
I'm gonna get mine in suede.
I'm sure Garm can arrange for that. The setup charge may kill ya though.
NonStopTuningUSA · Jan 17, 2009#18
BEAUTIFUL!!!
PHXDEMONPhoenix, AZ · Jan 17, 2009#19
That is exactly what I want my car to look like under the hood. 🙇
ChinoCharlesOH · Jan 17, 2009#20
I now realize I didn't comment earlier because I was jealous. 🙇
TEHxFALLEN V1.2Calabasas, CA · Jan 17, 2009#21
God.. It's so beautiful, I'm commenting again!
Doc ZaiusOttawa, ON, Canada · Jan 19, 2009#22
Originally Posted by LtNoogie ↑
This is one of the new MicroImage engine covers modified to fit a supercharged engine. We had to cut the front of the original cover to clear the blower and enlarge the oil cap hole to clear the larger Blitz oil cap.

My brother had the brushed aluminum anodized the same blue color to match my NST pulley set. Next we will etch some logos on the cover. We'll put MicroImage on there if Garm allows and maybe my brother's shop name.

Picture not included in this copy
Long... that looks great! 👍 I'm pretty sure I'd be down for a plain black one if some were made. (Uh, with a regular sized oil-cap). I wish I hadn't already cut up my stocker! 😛

Anyhow, do you think the design could be altered a bit to better fit around the 'charger? It could be even snugger (more profile hugging), but this simple change would make it look a bit cleaner. Garm, what do you think?

1 attachment not included in this copy

ROCKLAND TOYOTAROCKLAND COUNTY NY · Jan 19, 2009#23
Originally Posted by ddongbap ↑
Better looking than the valve cover + the nasty plug wires.
PLUG WIRES 😆......
ddongbaphay · Jan 19, 2009#24
Originally Posted by ROCKLAND TOYOTA ↑
PLUG WIRES 😆......
You know what I meant. Don't be dumb.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jan 19, 2009#25
Originally Posted by ddongbap ↑
You know what I meant. Don't be dumb.
yeah i do but it was just hanging out there and i had to take the bait, my apologies....
ddongbaphay · Jan 19, 2009#26
Originally Posted by ROCKLAND TOYOTA ↑
yeah i do but it was just hanging out there and i had to take the bait, my apologies....
I'll bait ya more then. hahaha.

I wanna get one of those things, that you have on a key ring, and you put it in your car, and you turn it, and it turns the car on. You know?
cali yarisCanoga Park, CA · Jan 19, 2009#27
^ a dildo?

anyways... I did make black ones, and plain, and TRD red. 👍
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jan 19, 2009#28
Originally Posted by ddongbap ↑
I'll bait ya more then. hahaha.

I wanna get one of those things, that you have on a key ring, and you put it in your car, and you turn it, and it turns the car on. You know?
if you try too hard it loses its luster. i'll give it a few days and then hit you again.....
Doc ZaiusOttawa, ON, Canada · Jan 19, 2009#30
Originally Posted by cali yaris ↑
anyways... I did make black ones, and plain, and TRD red. 👍
Garm, so have you already made these in Long's "Blitz" configuration? Or are you referring to the originals?
cali yarisCanoga Park, CA · Jan 19, 2009#32
I only have the originals. His cutout can easily be duplicated with a sabre saw and a metal-cutting blade.
Doc ZaiusOttawa, ON, Canada · Jan 19, 2009#33
Is there any possibility of getting an original that still has that whole front part intact (i.e. the two notches for the front mounting points aren't cut out)?
cali yarisCanoga Park, CA · Jan 19, 2009#34
no sorry, they are all already made.
pixiedixie862G-Hills, So Cal · Jan 19, 2009#35
Looks great in person!
ddongbaphay · Jan 19, 2009#36
Originally Posted by ROCKLAND TOYOTA ↑
youtube got blocked back where i am at work so i'll check later on....
Its just a rickroll. If you've heard of that before.
LtNoogieThread starterWest Hills, CA · Jan 20, 2009#37
Originally Posted by pixiedixie862 ↑
Looks great in person!
Who me? Well thanks. You're quite a cutie yourself.😆
LtNoogieThread starterWest Hills, CA · Mar 4, 2009#38
Ok, here's the final pictures of the engine cover. I picked it up from the engraver today after they etched the logo onto it.

Be on the lookout for a few more covers like this to be posted, but each with their own little twist.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
1NZYaris1New Zealand · Mar 4, 2009#39
🤤 very nice , me want
PETERPOOPOahu · Mar 4, 2009#40
prettyy
spookzSydney, Australia · Mar 4, 2009#41
That MI sticker is a nice touch! Looks stunning.. =P
White YarisWarm Orange County · Mar 4, 2009#42
wow nice... sick indeed. 🎉
LtNoogieThread starterWest Hills, CA · Mar 4, 2009#43
I started with a plain aluminum MicroImage engine cover, had a metal fab shop cut it to fit the body of the supercharger, a plating shop anodize it blue, and an engraver etch the MicroImage logo through the blue anodizing. What you see is the aluminum stock material exposed again.
spookzSydney, Australia · Mar 4, 2009#44
Wait, I don't see the Yaris World logo... only the Micro Image sticker (or is that an engraving too)?
PHXDEMONPhoenix, AZ · Mar 4, 2009#45
I wish my yaris looked like that under the hood 🙇
LtNoogieThread starterWest Hills, CA · Mar 4, 2009#46
Originally Posted by spookz ↑
Wait, I don't see the Yaris World logo... only the Micro Image sticker (or is that an engraving too)?
My bad. I meant MicroImage logo. -fixed-
Doc ZaiusOttawa, ON, Canada · Mar 4, 2009#47
That looks really great, Long! Nice one! 👍
LtNoogieThread starterWest Hills, CA · Mar 4, 2009#48
Originally Posted by echo_hrs ↑
It's Gawgeous...I'm definitely going to be getting one of these in satin black...Maybe get vvti or 1500 etched on it?

Cheers
If you and PeterPoop and Whoopee can agree that you want one, I can start another batch process so that you all split the costs for the metal fab shop, the plater, and if desired, the engraver. Also if you can all agree on the same color, that helps because it's a $50 batch cost for up to 5 covers of the same color. The engraver charged me $40 for one but would work with me for a batch order.

Mine cost the most because I had the work done as a one off. Camelll, Doc Zaius, and Kurokuma-kun were able to split many of the costs because there's were done together.

If there are other S/C who want in on this, they should get in on your order.

I don't make any money on this and just pass the costs on to you all.
PETERPOOPOahu · Mar 4, 2009#50
So how much would this be when it's all said and done if we went with the black.

I wouldn't want anything engraved. I want to keep the cost down. I am broke as a joke right now. You have no idea.