Yarisworld Archive

Engine cover for S/C engine

85 posts · 25,875 views · page 2 of 2

Replies continued

whooppee777Maryland · Mar 4, 2009#51
i like. i'm kinda gunna work on getting a carbon fiber engine cover. but if i cant get that done then i could consider this if it were anodized red without the micro image. nothing against micro image, i just like a clean look.
PETERPOOPOahu · Mar 4, 2009#52
I basically don't have money for this right now. Sorry.
*MAD DOG*Victoria, Australia · Mar 4, 2009#53
Originally Posted by LtNoogie ↑
Ok, here's the final pictures of the engine cover. I picked it up from the engraver today after they etched the logo onto it.

Be on the lookout for a few more covers like this to be posted, but each with their own little twist.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

I must say that is SEXY! You going to enter your car in car shows now? You should, you've put some real effort into your Yaris Long. 🙇
*MAD DOG*Victoria, Australia · Mar 4, 2009#54
Originally Posted by whooppee777 ↑
i like. i'm kinda gunna work on getting a carbon fiber engine cover. but if i cant get that done then i could consider this if it were anodized red without the micro image. nothing against micro image, i just like a clean look.

Garm is selling them in TRD red, with no etching, I think.
LtNoogieThread starterWest Hills, CA · Mar 4, 2009#55
Originally Posted by *MAD DOG* ↑
I must say that is SEXY! You going to enter your car in car shows now? You should, you've put some real effort into your Yaris Long. 🙇
Thanks, Tony. I probably would enter shows but I don't remember how to put my interior panels back on. I took them off in August to lay in the sound deadener and now stare at this stack of plastic and don't want to put the car back together again.


Originally Posted by *MAD DOG* ↑
Garm is selling them in TRD red, with no etching, I think.
I start with the covers that Garm sells but with no paint. I think the process of cutting a painted cover to fit the supercharger will chip the paint at the edges. That's why I start with a bare aluminum cover and have it anodized to a specific color.
1NZYaris1New Zealand · Mar 5, 2009#56
All you need now is a microimage Meerkat attached to the blitz to make
it really purrr-ty 😁

1 attachment not included in this copy

LtNoogieThread starterWest Hills, CA · Mar 11, 2009#57
Great, Mike. Can't wait to see the picture. I'm starting another batch of three covers and would like to see what a black cover looks like in the engine compartment.
frownonfunRGV, Texas · Mar 11, 2009#58
subscribed... cause who knows i might be special too one day and need a cover. looks sweet by the way. it even makes me not like you a little im so jealous. j/k. maybe.
PhaetonPort Angeles, Wa · Mar 13, 2009#59
I'm so happy to see a Startrek fan with a supercharged car lol.
eTiMaGoBangkok, Thailand · Mar 13, 2009#60
Originally Posted by Phaeton ↑
I'm so happy to see a Startrek fan with a supercharged car lol.
you mean, with a warp drive yaris? 😆
LtNoogieThread starterWest Hills, CA · Mar 13, 2009#61
Originally Posted by camelll ↑
Okay just did a test fit and have a small fitment issue. I will have to cut a little bit out but no biggie, just not sure how to cut it without damaging it. I think it needs to be cut to the bend roughly. Here are the pics. I have the same issue with the stock cover even after cutting it. It will look good once it is done though.👍

Don't mind the dirty compartment it has been to cold here to do anything about it. 😁
Mike, did you put the rubber faucet washers on the two studs before you put the cover on? The washers do two things... they lift the cover off the blower and they isolate the cover so it does not rattle.
kurokoma-kunmy own little world · Mar 13, 2009#62
The black looks amazing camelll! Long, I'd like a closer look at that bare metal etching on yours, was it done by chemical or laser or ?

Mine fits my LB fine 👍 I got an unfinished one and I love the brushed aluminum texture! It's heavy duty material and nice workmanship too. But I don't want to take pics until I at least get the new oil cap and big wing nuts on there. 😛

Thanks Long and Garm
frownonfunRGV, Texas · Mar 13, 2009#63
so did ya'll decide on the details of the modified cover group buy? i would like in on the group buy if it hasn't already happened. i'd be fine with the black or the blue but preferably black. and no i don't have a supercharger BUT i have decided to get one, just not right this second. don't wanna wait til i do get it in and miss out on the group buy.
LtNoogieThread starterWest Hills, CA · Mar 13, 2009#64
You have a PM
LtNoogieThread starterWest Hills, CA · Mar 13, 2009#65
Originally Posted by camelll ↑
Okay just did a test fit and have a small fitment issue. I will have to cut a little bit out but no biggie, just not sure how to cut it without damaging it. I think it needs to be cut to the bend roughly. Here are the pics. I have the same issue with the stock cover even after cutting it. It will look good once it is done though.👍

Don't mind the dirty compartment it has been to cold here to do anything about it. 😁
Sorry you've got a fitment problem. I got your PM.

Here's how mine is mounted to clear the blower and isolate the engine vibration. I call them rubber washers but they are really grommets. The third frame shows the clearance I have.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
LtNoogieThread starterWest Hills, CA · Mar 13, 2009#66
Originally Posted by kurokoma-kun ↑
The black looks amazing camelll! Long, I'd like a closer look at that bare metal etching on yours, was it done by chemical or laser or ?

Mine fits my LB fine 👍 I got an unfinished one and I love the brushed aluminum texture! It's heavy duty material and nice workmanship too. But I don't want to take pics until I at least get the new oil cap and big wing nuts on there. 😛

Thanks Long and Garm
Jo, I'll ask the etching house on Monday what process they used. I'm not an expert but I am guessing laser etching due to the precision. The metal that is left does not look like the original brushed aluminum anymore. I don't know if the anodizing process or the etching process changed the finish. Here are some closeups but I don't think they give a good sense of the finish.

Picture not included in this copy

Picture not included in this copy
eTiMaGoBangkok, Thailand · Mar 14, 2009#67
Originally Posted by camelll ↑
Long no worries there was no possible way we could have known that it would not clear. I will play around with it on Mon or Tues and and see exactly what will need to be done to it. I did not try any rubber washers like you said to, but when I lifted it up to see how high it would need to be to clear the s/c it was over the studs. I will also be working on the projectors as well and figure out what I need for them to get working so it will be a busy 2 days off as long as nothing comes up. I wish there was another active member who has a supercharged sedan to compare notes with.
The whole thing is held by only those two posts, right? So it should be possible to tilt the whole cover back a bit, hence getting the required clearance up front? not sure how you could do that, but worst case scenario stick some kind of a rubber bumper between it and the engine head?
eTiMaGoBangkok, Thailand · Mar 14, 2009#68
yeah it's really weird, I don't see how the sedan would have a different location of those posts compared to the LB.. unless the supercharger unit itself is a lil different, after all look at Peter, he didn't need to file down a corner of his to get it to fit, while others did... who knows!
KCALB SIRAYVirginia · Mar 14, 2009#69
to your point filing, didn't Whooppee have to file down a corner on his?
frownonfunRGV, Texas · Mar 15, 2009#70
can either of these logos be engraved? and if so would anyone else want either of these engravings?

Picture not included in this copy

Picture not included in this copy
LtNoogieThread starterWest Hills, CA · Mar 15, 2009#71
Whatever logo you pick, it needs to be high res. If it's a tiny logo on your screen, it can only be etched as a tiny logo or else you'll see pixelation when he blows it up.
frownonfunRGV, Texas · Mar 15, 2009#72
Originally Posted by LtNoogie ↑
Whatever logo you pick, it needs to be high res. If it's a tiny logo on your screen, it can only be etched as a tiny logo or else you'll see pixelation when he blows it up.
ok... also, and this feels like a dumb question, is it gonna be white like your microimage, uh, image or will it be whatever color the source pic is?
LtNoogieThread starterWest Hills, CA · Mar 15, 2009#73
The image will be whitish because it's the bare aluminum after the colored anodized layer has been removed. If you want the image to be a different color, you'll have to find an artist or graphics shop. They need to remember to use paint that can stand the high temps right over the engine.
frownonfunRGV, Texas · Mar 15, 2009#74
that's what i thought but just wanted to be sure
LtNoogieThread starterWest Hills, CA · Mar 17, 2009#75
Wow, you do have short studs on the valve cover. I can barely see the threads. Ok, I'll have the center section cut higher. Thanks.
RagnaCaTVillalba, Puerto Rico · Mar 17, 2009#76
Sorry to bud in but Just by the look of it comparing to LtNoogie' s is cut in deeper than yours camell you can see it at the bend....
kurokoma-kunmy own little world · Apr 10, 2009#77
hmmm almost forgot to post my peetcher.

I was gonna paint it with that "hammered" texture stuff in cooper color, but now that I see the beauty of the brushed aluminum I don't know if I will.

The crazy lookin wing nuts were originally for a hot rod air cleaner 😁

1 attachment not included in this copy

cali yarisCanoga Park, CA · Apr 10, 2009#78
^ omg, that is really nicely done, every detail.
kurokoma-kunmy own little world · Apr 10, 2009#79
thanks for these covers Garm, and thanks to Noogie for the custom cut!!

what i want now is a brushed aluminum battery box
1NZYaris1New Zealand · Apr 10, 2009#80
Originally Posted by kurokoma-kun ↑
hmmm almost forgot to post my peetcher.

I was gonna paint it with that "hammered" texture stuff in cooper color, but now that I see the beauty of the brushed aluminum I don't know if I will.

The crazy lookin wing nuts were originally for a hot rod air cleaner 😁
I want those wing nuts 👍
LtNoogieThread starterWest Hills, CA · Apr 10, 2009#81
KK, that is just evil looking. Are you running those Ben Hur spiked chariot hubcaps on your wheels too?😈
frownonfunRGV, Texas · Apr 25, 2009#82
got my cover yesterday. ended up not going with the blitz S/C but it still looks good. guess i'll figure out exactly what engine cover i wanna sport when i get the PE S/C on. may just buy another uncut cover from micro image. i do love the engraving though.

Picture not included in this copy
LtNoogieThread starterWest Hills, CA · Apr 25, 2009#83
It is one of a kind. If you switch to another one, I'm sure a Blitz'd owner will buy it from you. I too love the texture of the aluminum after the laser etching.
frownonfunRGV, Texas · Apr 25, 2009#84
yeah we'll see though. thanks for the cover.
LtNoogieThread starterWest Hills, CA · May 4, 2009#85
Mike, that's a nice finishing touch to your engine compartment.