i re read his post over looked removing SIDE MOUNT!!!!!!!!!!! now what side mount is he talking about???Originally Posted by Bluevitz-rs ↑Put a jack under the oil pan and undo the passenger side motor mount.
DIY waterpump RnR
86 posts · 72,615 views · page 2 of 2
Replies continued
Because I bought the felpro separately.I also have a new metal oem one.Originally Posted by ROCKLANDTOYOTA ↑WHY does the 2 gaskets in the last picture look different??
must be how im looking at it but they do look DIFFERENT....Originally Posted by auxmike ↑Because I bought the felpro separately.I also have a new metal oem one.
Common man, there's only 3 mount on the engine, and I don't think you're going to remove the one on the transmission side.Originally Posted by marcus ↑i re read his post over looked removing SIDE MOUNT!!!!!!!!!!! now what side mount is he talking about???
I'll see if I can post a pic of those two and the metal oem one after I get home.Originally Posted by ROCKLANDTOYOTA ↑must be how im looking at it but they do look DIFFERENT....
I've done that, but the motor still doesn't drop.Originally Posted by Bluevitz-rs ↑Put a jack under the oil pan and undo the passenger side motor mount.
you lowered the jack and the motor didn't move?Originally Posted by goliath1812 ↑I've done that, but the motor still doesn't drop.
nope, didn't move one bit. the jack wasn't even touching the oil pan.
I just put a 4ft prybay to the side of the engine and pryed while sliding out the pump...
I did'nt even have to remove a tire.
I did'nt even have to remove a tire.
Other than the Autozone or Kragen/O'Reilly replacements, is there something a bit better for an aftermarket replacement?
This also makes me want to look into an oil cooling kit for my yari :)
This also makes me want to look into an oil cooling kit for my yari :)
I bought the AC Delco one. Madeinthe USA !
Ok, this is going to sound completely stupid, but how in the hell do i get the mount to separate when I'm trying to drop the motor?, bolts removed and the damn thing won't budge. WTH?
let me also add the i beat the hell out of a pipe i had using it as a pry bar and was tempted to climb onto the engine and jump on it...
never mind, i'm a dumbass and see the tip of the bolt that held the nut i need to remove...
SWEET!Originally Posted by auxmike ↑I just put a 4ft prybay to the side of the engine and pryed while sliding out the pump...
I did'nt even have to remove a tire.
I don't recommend doing this any more, I put a nice dent in my a/c line!
you have to take out a bolt anyways might as well take off the ac compressor instead of dropping the engine then the pump will clear i watched the way toyota did it..
I wouldn't do that, especially without a lift. When I used the prybar I didn't
Mess with any bolts..
Mess with any bolts..
Originally Posted by auxmike ↑I don't recommend doing this any more, I put a nice dent in my a/c line!
Well now we know better.
Where and what did you pry against? Besides the AC line I mean?
Was it a case of PRY....quick wp out...PRY...quick wp in?
I THINK I can control myself not to rush and think about what I am doing and so avoid ruining my car.
Is it possible to get the old wp off then cut a piece off it with a dremel so as to be able to remove it?
Perhaps there are extrainious parts on the new one that could be ground off to get it in there?
Im like the people who cut jeeps into four pieces with a cutting torch to fly them in C47s over the Hump in WW2 then welded them back together again once they got there.
Whatever works think outside the box.
Bronsin, I pried on the center of the crank pulley, NOT the timing chain cover. You have to pull REAL hard whist sliding out the pumps. Those AC lines are thin aluminum tubing,watch out!
did my girls today. didn't drop the motor, but needed to pry it back about 1/2" to get the pump out and in. used a 1/2" breaker bar between the motor mount and the head. didn't need any force, the blocked moved easy.
When you said you dropped it 2 inches. Did you undo the the motor mount bolts?
yes, just on the passenger side. both or at least there were 2 on mne
Did you drain coolant or merely have to fill it back to acceptable range given the amount that leaked from the pump?
ttt
Originally Posted by sort_o_sane ↑Ok, this is going to sound completely stupid, but how in the hell do i get the mount to separate when I'm trying to drop the motor?, bolts removed and the damn thing won't budge. WTH?
on yaris from 2003, i´m trying to follow this DIY... already remove the two bolts from passenger side mout but no drop. What is missing? thanks
I though of adding that to the guide at some point, there is a 3rd bolt from the bottom.Originally Posted by cbmago ↑on yaris from 2003, i´m trying to follow this DIY... already remove the two bolts from passenger side mout but no drop. What is missing? thanks
I can tell you the size or make a pic if you need it.

Originally Posted by hw6515 ↑I though of adding that to the guide at some point, there is a 3rd bolt from the bottom.
I can tell you the size or make a pic if you need it.
ok! ia go to the car and see it now ( and try to continue the replacement :)
Thanks
refresh the page, pic is in my previous post.
support the engine before loosing the final bolt.
If you have any other question, let me know.
support the engine before loosing the final bolt.
If you have any other question, let me know.
Got it! :)) spent almost all afternoon trying to find why!!!!!!!!Originally Posted by hw6515 ↑refresh the page, pic is in my previous post.
Thank you very much for your help :)
Regards
Yaris Verso 2000, I loosened the 2 top bolts on the engine mount and the nut on the underside of the mount a couple of turns, I then got a nail bar and some wood and levered the engine, this shifted the engine enough so the pump came out easily.
Thanks for the original guide
Thanks for the original guide
Whats a nail bar? 🤷
I just did my waterpump on my 2007 yaris two weeks ago i didnt had to loosen the two top bolts from passenger side mount,I had enough room to take out and install the waterpump,I just took the waterpump pulley off.
Originally Posted by Veganman ↑I just changed out the water pump on our 2007 Yaris at 190,000 miles. It never leaked a drop but began making a disturbing noise that was very difficult to track down. After referring to many posts on Yarisworld, I felt confident the noise was in the pump even though it felt fine when the belt was removed and the pump was turned by hand. The only additional comments I would make are as follows: I never had to lower the front of the engine by 2"; in fact, I didn't lower it at all. The pump can be removed and the new one installed by carefully turning and twisting it a bit.
I bought a replacement pump and a metal gasket from Auto Zone and everything worked out perfectly. Total time to replace the pump and get the car running again was 2 1/2 hours.
Good point. I found that unbolting the AC tubing mount, that sits by the pulley, also helps with being able to remove it without lowering or raising the engine.
Originally Posted by Veganman ↑I just changed out the water pump on our 2007 Yaris at 190,000 miles. It never leaked a drop but began making a disturbing noise that was very difficult to track down. After referring to many posts on Yarisworld, I felt confident the noise was in the pump even though it felt fine when the belt was removed and the pump was turned by hand. The only additional comments I would make are as follows: I never had to lower the front of the engine by 2"; in fact, I didn't lower it at all. The pump can be removed and the new one installed by carefully turning and twisting it a bit.
I bought a replacement pump and a metal gasket from Auto Zone and everything worked out perfectly. Total time to replace the pump and get the car running again was 2 1/2 hours.
Did you buy the Duralast water pump (AWP-9187)? How many miles have you driven since replacing the pump with an aftermarket? Any issues or recommendations?
Mine has 200k and is not leaking yet. But I did flush my coolant at the recommended service intervals and only used toyota pink fluid.