cali yarisOriginal postCanoga Park, CA · Jan 10, 2009#1We (meaning NST & MI) are thinking about offering a shifter extension. Race cars often have longer shifters (the knob is closer to the steering wheel. I've also noticed with our stock seats so high up, the shifter could be a little higher.
A shifter extension combined with one (or both!) NST short shifter kits might be the perfect shifter set up for our cars.
So, here's an interest poll to see if it's worth pursuing, female thread underneath, male threads on top, easy and removable extension to your stock shifter.
Like this:
Picture not included in this copy
What say you?
Replies 109
ddongbaphay · Jan 10, 2009#2I'm DEF buying one.
And you know it!
cali yarisThread starterCanoga Park, CA · Jan 10, 2009#3you didn't vote, though 🙄
KCALB SIRAYVirginia · Jan 10, 2009#4what price point and what mm you think for the shifter knob (assuming stock, but wanted to clarify)?
mikenacaratoBrentwood, TN · Jan 10, 2009#5i would like a 2" one :)
thebarberGrand Rapids, MI · Jan 10, 2009#6$?
cali yarisThread starterCanoga Park, CA · Jan 10, 2009#7don't know about $$ yet. Just seeing if people like the idea.
Somewhere between $10 and $50 🙄
kcalb, it would end exactly as your stock shifter ends now.
ddongbaphay · Jan 10, 2009#8 Originally Posted by
cali yaris ↑ you didn't vote, though 🙄
Oh, I didn't see the vote.
ddongbaphay · Jan 10, 2009#9Garm, if these don't go into production, I want one anyways.
edmccOmaha, Nebraska · Jan 10, 2009#10I'm interested,I voted for the 2" one.
m911gtChicago · Jan 10, 2009#11Does anyone have that picture of the guy who raised his shifter by like 18"? Garm, I'm sure you remember...
ddongbaphay · Jan 10, 2009#12It was me. And it wasn't 18 inches. Please..
cali yarisThread starterCanoga Park, CA · Jan 10, 2009#13yeah I'll probably make a few no matter what. whatever length most people vote on.
PHXDEMONPhoenix, AZ · Jan 10, 2009#14In for a 2" one granted I can still fit my redline shift boot on fine.
cali yarisThread starterCanoga Park, CA · Jan 11, 2009#15it will still fit, but I'm guessing the shifter will stick out the top of it.
Kaotic LazagnaCentral Valley, CA · Jan 11, 2009#16Here's my buddy's shifter extension on his Box.
Picture not included in this copy
ddongbaphay · Jan 11, 2009#17That looks painful.
Kaotic LazagnaCentral Valley, CA · Jan 11, 2009#18LOL. He loves it tho.
pinoypizzaboylas vegas/ henderson · Jan 11, 2009#19the closer to the wheel the better :) shift travel is gonna b a bitch tho :(
Kaotic LazagnaCentral Valley, CA · Jan 11, 2009#20 Originally Posted by
pinoypizzaboy ↑ the closer to the wheel the better :) shift travel is gonna b a bitch tho :(
Not if you use both shifter and linkage SSK. hehe. 😉
ddongbaphay · Jan 11, 2009#21Here is my mile long shifter. Or w/e that other guy said.
Picture not included in this copy
Man, I hated that stock steering wheel.
While I'm at it, I'll post this. And I might as well make another thread about it.
Picture not included in this copy
ddongbaphay · Jan 11, 2009#22But srsly, Garm, if you can make me one asap, I'll pick it up, asap.
m911gtChicago · Jan 11, 2009#23lol Rob, sorry, I meant no offense. the only reason i said it like that was because you were the first guy i could remember who had a major extension. i wanted my shifter shorter to look sleek so i cut mine down, i just couldn't have imagined extending it. props to you for being different with your car. kick ass Nardi steering wheel setup!
eTiMaGoBangkok, Thailand · Jan 11, 2009#24aaaah what guy wouldn't mind a few extra inches? 😆
But as for myself, I'm happy with my short stick 😁
m911gtChicago · Jan 11, 2009#25 Originally Posted by
eTiMaGo ↑ aaaah what guy wouldn't mind a few extra inches? 😆
But as for myself, I'm happy with my short stick 😁
😆 for once, i won't even comment.
jkuchtaL.A. · Jan 11, 2009#26I'd like a 2" extension!
Kaotic LazagnaCentral Valley, CA · Jan 11, 2009#27LOL at Thomas.
PHXDEMONPhoenix, AZ · Jan 11, 2009#28 Originally Posted by
Kaotic Lazagna ↑ Here's my buddy's shifter extension on his Box.
Picture not included in this copy
Is that a fucking breaker bar 😆😆🤣
Kaotic LazagnaCentral Valley, CA · Jan 11, 2009#29Who knows, he gets bored a lot...and when he gets bored, he'll start doing anything to his car. LOL. Just last week, he went and graffiti'd his hood out of boredom. LOL.
PHXDEMONPhoenix, AZ · Jan 11, 2009#30 Originally Posted by
Kaotic Lazagna ↑ Who knows, he gets bored a lot...and when he gets bored, he'll start doing anything to his car. LOL. Just last week, he went and graffiti'd his hood out of boredom. LOL.
Wow 😆 Was he drunk? 🍻
ddongbaphay · Jan 11, 2009#31 Originally Posted by
m911gt ↑ lol Rob, sorry, I meant no offense. the only reason i said it like that was because you were the first guy i could remember who had a major extension. i wanted my shifter shorter to look sleek so i cut mine down, i just couldn't have imagined extending it. props to you for being different with your car. kick ass Nardi steering wheel setup!
Naw, I know you were joking. I was just joking back. lol.
But I've taken it off since then. Was kinda long. I think it was a total of 6 inches above stock. Or something like that. 3-4 Inches will be bueno for me.
Kaotic LazagnaCentral Valley, CA · Jan 11, 2009#32 Originally Posted by
PHXDEMON ↑ Wow 😆 Was he drunk? 🍻
Nope, just extremely bored. hahahahaha.
texkidSugar Land, TX · Jan 11, 2009#33I do think 2" would be a modest increase. I fear 3" or 4" would hit the A/C controls. Heck, right now my middle knuckle is close to the A/C switch when I shift to 3rd gear.
cali yarisThread starterCanoga Park, CA · Jan 11, 2009#34My thinking is to pair this up with one or both NST short shifter kits, so your shifter would not hit the a/c controls.
ddongbaphay · Jan 12, 2009#35 Originally Posted by
texkid ↑ I do think 2" would be a modest increase. I fear 3" or 4" would hit the A/C controls. Heck, right now my middle knuckle is close to the A/C switch when I shift to 3rd gear.
It won't. Trust the guy with the 6 inch extension from six months ago.
ChinoCharlesOH · Jan 12, 2009#36I personally don't see this catching on. You'll sell 5 and it'll trail off after that.
I'd personally like to see an aftermarket replacement for the whole cage. I think the stock pivot point on the shifter assembly is a little low.
justjesusOrange County · Jan 12, 2009#37Yeah, Im voting after typing this. I want one BAAAAAD. My friend has one on his Fit, and I love the added length. If it's reasonably priced, I will def buy one.
mikenacaratoBrentwood, TN · Jan 12, 2009#38the extension is perfect for me. i hate using my arm rest because when i shift into 2nd or 4th it makes me feel like my wrist will snap.
cali yarisThread starterCanoga Park, CA · Jan 12, 2009#39 I personally don't see this catching on. You'll sell 5 and it'll trail off after that.
Let' return to this point in about a month, when I've sold out my stock 😁
ddongbaphay · Jan 12, 2009#40Garm, I think I should be the test car used for this project.
TheUnGroomedMD · Jan 12, 2009#41I removed my arm rest to make shifting easier. An extension might let me put the arm rest back in.
GalavoxxSan Francisco · Jan 13, 2009#42 Originally Posted by
pinoypizzaboy ↑ the closer to the wheel the better :) shift travel is gonna b a bitch tho :(
Seriously, if you don't have a SSK and you throw more than a couple of inches on there this thing will be like driving a big rig. Even with the SSK throws are going to increase.
PHXDEMON: I dig the fancy crystal knob on your buddy's ride. Is he into D&D?!!
WOOT!! 😳
RagnaCaTVillalba, Puerto Rico · Jan 13, 2009#43Can there be a slight curve added to it?
ddongbaphay · Jan 13, 2009#44Or how bout an angle. Two of them. Just to get the ball backwardsa little bit.
NonStopTuningUSA · Jan 13, 2009#45 Originally Posted by
RagnaCaT ↑ Can there be a slight curve added to it?
Originally Posted by
ddongbap ↑ Or how bout an angle. Two of them. Just to get the ball backwardsa little bit.
It's possible!
Can there be enough interest for us to build such a piece?
mikenacaratoBrentwood, TN · Jan 13, 2009#46that would be even cooler. either way, whatever size and shape this comes out to be..im in. :)
ddongbaphay · Jan 13, 2009#47 Originally Posted by
NonStopTuning ↑ It's possible!
Can there be enough interest for us to build such a piece?
I'll buy 10. Jk. But srsly. I want one, even tho it isnt cheeap.
Its a Toy. It should work on all Toys.
/edit.
What I meant to say was, since Toyotas share thread patterns, why don't we just post on MR2 forums, or W/E other cars NST makes parts for.
cali yarisThread starterCanoga Park, CA · Jan 14, 2009#48 Garm, I think I should be the test car used for this project.
ok
Kaotic LazagnaCentral Valley, CA · Jan 14, 2009#49Not a bad idea of posting it on other Toyota/Scion forums. I know that the Toaster people are doing this, as with the example of my friend's.
WolfWingsKansas City, MO, USA · Jan 14, 2009#50Just may be me, but I think the 4" extension would be redundant. Just buy two 2" extensions, screw em' together with some lock-tite, call it good. So, voted for the 2" extension. What's the drop caused by the in-cabin SSK BTW?