Replies continued
cali yarisThread starterCanoga Park, CA · Jan 14, 2009#51the in cabin SSK from NST doesn't drop the shifter at all, it just reduces throw (25%).
This is different from the TWM type shifter which is the whole thing and does lower the knob.
RagnaCaTVillalba, Puerto Rico · Jan 14, 2009#52 Originally Posted by
NonStopTuning ↑ It's possible!
Can there be enough interest for us to build such a piece?
I'm in I have a twm shifter which I love but I do perfer that knob is placed further back so I woundn't what it to be more than 2" 👍
mikenacaratoBrentwood, TN · Jan 14, 2009#53I think we need an official GB thread started here. I would say there is enough interest. :)
PHXDEMONPhoenix, AZ · Jan 14, 2009#54So when are the 2 inch extensions going to be made?
ddongbaphay · Jan 14, 2009#55 Originally Posted by
RagnaCaT ↑ I'm in I have a twm shifter which I love but I do perfer that knob is placed further back so I woundn't what it to be more than 2" 👍
Solution: Get a NST one.
cali yarisThread starterCanoga Park, CA · Jan 15, 2009#56OK, I had a few of these made for fun and to try out on my own car. They aren't NST but they are good quality 6061 aluminum.
Available in the MI store now, until we run out.
Picture not included in this copy
ddongbaphay · Jan 15, 2009#57garm I want one. Can u hold one for me? I'll take the three inch.
NonStopTuningUSA · Jan 15, 2009#58WOW!!! Those are cheap!!!!!!
cali yarisThread starterCanoga Park, CA · Jan 15, 2009#59I put a 3" one on my car today. WOW is all I can say. The knob is now in a natural position for all-around and performance shifting. This is one of those "why the heck didn't I think of that a year ago" mods. ESPECIALLY combined with the NST short shift kit.
If you don't have the short shift kit, consider getting both of these items as a package, you will be really glad you did!
jkuchtaL.A. · Jan 15, 2009#60^
Price....yes...
Quality......no
ddongbaphay · Jan 15, 2009#61 Originally Posted by
jkuchta ↑ ^
Price....yes...
Quality......no
I don't get it.
jkuchtaL.A. · Jan 16, 2009#62I was typing as Cali posted.
The carrot refers to the post above it from NST regarding price..."WOW!!!Those are cheap!!!!!"
just ordered a 3''.
edmccOmaha, Nebraska · Jan 16, 2009#64ordered a 2" one 👍
ddongbaphay · Jan 16, 2009#65Look at that instant interest.
mikenacaratoBrentwood, TN · Jan 16, 2009#66got me a 3 incher......*snickers*
cali yarisThread starterCanoga Park, CA · Jan 16, 2009#67awesome guys, they'll all go out in today's mail.
RagnaCaTVillalba, Puerto Rico · Jan 16, 2009#68Any hope on a s curved one about 2" Come on NST!
Originally Posted by
cali yaris ↑ awesome guys, they'll all go out in today's mail.
awesome can't wait will post pic's as soon as it is here.🙌
ddongbaphay · Jan 16, 2009#70 Originally Posted by
RagnaCaT ↑ Any hope on a s curved one about 2" Come on NST!
NST didn't make this first batch.
cali yarisThread starterCanoga Park, CA · Jan 16, 2009#71an "s" curved one would have to be made in such a way that it tightens at exactly the correct angle. I'm not sure how easy that is to engineer?
ddongbaphay · Jan 16, 2009#72You could just include a nut. Put the bolt on first, put the then the extension on. Angle the extension the way you want it, then reverse twist the nut, till it tightens.
Thats how the Skunk2 shift knobs go in the Hondas. Since the Skunk2 was metal, and theres no extra play, like the stock shifter has, the extra nut would tighten the shifter where you kept it. Hope that made sense.
RagnaCaTVillalba, Puerto Rico · Jan 17, 2009#73 Originally Posted by
ddongbap ↑ You could just include a nut. Put the bolt on first, put the then the extension on. Angle the extension the way you want it, then reverse twist the nut, till it tightens.
Thats how the Skunk2 shift knobs go in the Hondas. Since the Skunk2 was metal, and theres no extra play, like the stock shifter has, the extra nut would tighten the shifter where you kept it. Hope that made sense.
Thanks man you beat me to that yep there has to be a nut to lock the position...
cali yarisThread starterCanoga Park, CA · Jan 17, 2009#74good thinking - that would work for sure
ddongbaphay · Jan 17, 2009#75If you're gonna do a limited angle production, I'll buy one of those too.
PHXDEMONPhoenix, AZ · Jan 17, 2009#76Just ordered a 2" one
thanks Garm.🎉
1 attachment not included in this copy
mikenacaratoBrentwood, TN · Jan 27, 2009#78got my extension on and i love it! one issue i encountered was the shift knob i had wouldnt work with it. the extension is too large to fit up into the hole on the bottom of the shift knob.
the knob that will NOT work (disregard the short shifter):
Picture not included in this copy
i also had that problem, i had to grind it down. then i decided to extend it some more.
1 attachment not included in this copy
PHXDEMONPhoenix, AZ · Jan 27, 2009#80Mine works great. I love the more natural position but now my 40 dollar shift boot won't fit and my shift throw is a mile long once again.
cali yarisThread starterCanoga Park, CA · Jan 27, 2009#81^ are you using a short shift kit of any kind?
Mine fit up into my TWM shifter fine. For future reference, how much thinner should the top be to accomodate your shifters?
My shift boot doesn't look great now either, I have some ideas to fix that.
Originally Posted by
cali yaris ↑ ^ are you using a short shift kit of any kind?
Mine fit up into my TWM shifter fine. For future reference, how much thinner should the top be to accomodate your shifters?
My shift boot doesn't look great now either, I have some ideas to fix that.
if you made the threads on the shift knob side a little longer,maybe 1/2'' more would be perfect.
RagnaCaTVillalba, Puerto Rico · Jan 27, 2009#83Any S in progress?
mikenacaratoBrentwood, TN · Jan 27, 2009#84in order to fit the shift knob i had on there the shaft would have to be the same width as the threads
PHXDEMONPhoenix, AZ · Jan 28, 2009#85 Originally Posted by
cali yaris ↑ ^ are you using a short shift kit of any kind?
Mine fit up into my TWM shifter fine. For future reference, how much thinner should the top be to accomodate your shifters?
My shift boot doesn't look great now either, I have some ideas to fix that.
The extension is awesome. It's just that my shift boot isn't tall enough 🙁 I am using one of the SSK's that go onto the linkage but now I have to save up for the stage 2 SSk to reduce the throw back again.
matthewaiunited states · Jan 21, 2012#86.
1 attachment not included in this copy
matthewaiunited states · Feb 2, 2012#87ahhh im still wishin...
cali yarisThread starterCanoga Park, CA · Feb 2, 2012#88just needs to be 8x1.25 right?
TickleTimeTimArkansas · Feb 3, 2012#89i love the extension i got from garm. i just wrapped it in vinyl instead of looking for a giant boot.
cali yarisThread starterCanoga Park, CA · Feb 3, 2012#90Next time I order these, the shop says they'll make a few narrow ones for you automatic guys. 2" or 3" preferred?
matthewaiunited states · Feb 3, 2012#91oh cool id be down for one i guess either length
403RSCalgary, Canada · Feb 3, 2012#92 Originally Posted by
cali yaris ↑ Next time I order these, the shop says they'll make a few narrow ones for you automatic guys. 2" or 3" preferred?
As an auto guy, I'm always too narrow and a couple inches short. 🙁
cali yarisThread starterCanoga Park, CA · Feb 6, 2012#93TMI
matthewaiunited states · Feb 8, 2012#94can anyone help me will this PTR51-00110 shift knob from 2011 scion tc fit 2010 sedan a/t ?
thank you
matthewaiunited states · Feb 17, 2012#95 Originally Posted by
matthewai ↑ can anyone help me will this PTR51-00110 shift knob from 2011 scion tc fit 2010 sedan a/t ?
thank you
hey i got it and it fits and feels awesome now i want the a/t extension any eta on that mi >>/?. hahah jaykay
1 attachment not included in this copy
matthewaiunited states · Mar 2, 2012#96guys please can someone confirm this will fit on an automatic
it says 10mm x 1.25 as opposed to m8 x 1.25 are these the same sizes????
please if anyone could help im trying to get this cuz i dont want to wait for micro image and pay more money from them and possibly have the package lost in the mail again (thanks to jeff for finding it)
http://www.ebay.com/itm/250783341386...ht_1539wt_1103 matthewaiunited states · Mar 3, 2012#97cali yarisThread starterCanoga Park, CA · Mar 3, 2012#9810mm is two mm larger than 8mm. Not the same
Yaris manual is 10mm x 1.25
Yaris auto is 8mm x 1.25
CrankyOldManWest Michigan · Mar 3, 2012#99I could have sworn the manual knob was M12 x 1.25...
matthewaiunited states · Mar 4, 2012#100yes wasnt to sure that m8 ment 8mm
thank you