Yarisworld Archive

Motor Oil and filters

95 posts · 43,602 views · page 1 of 2

LafiroOriginal postNYC · Dec 11, 2008#1
I have researched this with no prevail on this site, maybe its been erased since it was hacked before??

Anyway, so I need an oil change bad... running close to 5000miles on my mobile1 5w-30. I was thinking of going with royal purple 5w-30.

Others have said 0w30? I don't eee what this will do to an engine that states 5w30. Please give me some insight before I do stay with 5w30.

If that oil is good, what filter should I use? I have heard toyota tell me that they only recommend their oil filters.

If anyone can get me a part number for the oil filter for my 2007 Yaris Sadan, I would appreciate that.

Maybe I can buy the filter and just change the oil myself at home instead of driving far and spending more on labor costs.

Thank you!

Replies 94

mikenacaratoBrentwood, TN · Dec 11, 2008#2
when i asked the dealer they said 5w30 and only 5w30
superfly78209Arkansas · Dec 11, 2008#3
even 5w30 in the winter?
mikenacaratoBrentwood, TN · Dec 11, 2008#4
5w30 is all she wrote apparently and he also said in the yaris regular toyota 5w30 or synthetic 5w30 will perform about the same. i wanna run synthetic because i like it though
1stToyotaOklahoma · Dec 11, 2008#5
Originally Posted by Lafiro ↑
I have researched this with no prevail on this site, maybe its been erased since it was hacked before??

Anyway, so I need an oil change bad... running close to 5000miles on my mobile1 5w-30. I was thinking of going with royal purple 5w-30.

Others have said 0w30? I don't eee what this will do to an engine that states 5w30. Please give me some insight before I do stay with 5w30.

If that oil is good, what filter should I use? I have heard toyota tell me that they only recommend their oil filters.

If anyone can get me a part number for the oil filter for my 2007 Yaris Sadan, I would appreciate that.

Maybe I can buy the filter and just change the oil myself at home instead of driving far and spending more on labor costs.

Thank you!
I'd just stick with 5w-30. Being synthetic the cold flow is good enough and I doubt that fuel economy will be that much different with 0w-30

Wix (PN 51394)/Napa Gold (PN 1394) is a quality filter.
RP oil is good, but I'd have to pay about $2 per qt more than the deal I'm getting on Amsoil...In the past I've used M1, Redline, RP, etc; all pretty good oil and fairly easy to find.

...or ask someone to change it for you, with you suppling the oil and filter. You're probably looking at maybe $20.00 (labor). Around here synthetic oil changes go for $55.00 to $85.00, depending where you shop.
LafiroThread starterNYC · Dec 11, 2008#6
Cool, thank you to all for the quick response.

I have not found Amsoil anywhere just yet, but for the little difference it makes on just 4 quarts of oil the engine needs, I rather go for the best.

Other then that, what would be concidered the "best" oil filter for our car?

I just want to find it, stock up on it all, and do this myself for now on. Any website or vendor on here that sells the stuff, please recommend, if not its ebay.
ChupacabraCT · Dec 11, 2008#7
K&N would likely make the best filter but it's WAY overkill for the Yaris. The wix or OE filter is just fine, especially if you are diligent with your oil changes.
gidNortheast · Dec 11, 2008#8
see posts here for Used Oil Analysises for SHELL , PENNZOIL full synthetics . Good performance at a fair price . Says 5w-30 on oil cap and in owners manual . No mention of 0w-30 . Read somewhere that TOYOTA is getting tough on warranty for engine due to misuse . Better to be safe than sorry.
1stToyotaOklahoma · Dec 11, 2008#9
If you want overkill find an Amsoil dealer, here on the board or a local distributor (check the Amsoil site for answers?), and use HP5w-30 and their Ea oil filter (Ea009)

The Ea filter appears to be built by Wix, but the filter media isn't paper, looks more like a K&N air filter...some sort of media supported by mesh screen.

Amsoil XL oil is great for 5K OCIs, with the WIX filter, overkill for the HP oil and the Ea filter, but I get a good deal so I went with the overkill.
IllusionXBrossard, QC · Dec 11, 2008#10
i wonder who makes the TRD filters... they go for 20-40$ a piece.. like.. omg
LafiroThread starterNYC · Dec 11, 2008#11
All these abriviations are throwing me way off. Dont understand much of them. Im not stupid, just cant read them all when half the sentence is just that!

Either way, I guess I will stick with Royal Purple this time.

Does anyone know if I deviate from bringing in my car to the dealership, if they will use that against me in the future if something goes wrong? (Assuming I just do the oil changes myself?) So far all maintenance has been done by them.
mikenacaratoBrentwood, TN · Dec 11, 2008#12
Originally Posted by IllusionX ↑
i wonder who makes the TRD filters... they go for 20-40$ a piece.. like.. omg
K&N.. my dealer sells them for $9
1stToyotaOklahoma · Dec 11, 2008#13
Who makes K&N oil filters?
TheSilkySmoothNew Hampshire · Dec 11, 2008#14
Originally Posted by Lafiro ↑
All these abriviations are throwing me way off. Dont understand much of them. Im not stupid, just cant read them all when half the sentence is just that!

Either way, I guess I will stick with Royal Purple this time.

Does anyone know if I deviate from bringing in my car to the dealership, if they will use that against me in the future if something goes wrong? (Assuming I just do the oil changes myself?) So far all maintenance has been done by them.
Just keep ALL the paperwork in your owners manual in the glove box. Receipts, dates RO's. I always ask for RO printout of any work done even at dealer so thier computer database doesn't go "mysteriously" off line during a warranty issue.

AFA oil and filter - tried 'em all over the years - settling on MOTUL 8100 eco-nergy (not in stores, imported from europe, from LTB motorsports online) and Wix filter but for the 2AZFE 2.4L motor - just a bit bigger but same specs. Car runs perfect now with this stuff - it didn't before. Too bad it like 9$ a litre! I am a MOTUL convert. I had Royal Purple 5w30 street oil in there a while back but wasn't crazy about it really. It ran good up at the redline with hammer down street race driving action but weird and nervous at tooling around grandma speeds. IDK. my dos centavos
1stToyotaOklahoma · Dec 11, 2008#15
Originally Posted by IllusionX ↑
i wonder who makes the TRD filters... they go for 20-40$ a piece.. like.. omg
Didn't Denso make the real TRD filters? I don't know if they had the foam media like the OEM Japanese Toyota filters...like what was installed on the Yaris from the factory, unlike what the dealership stocks.
TheSilkySmoothNew Hampshire · Dec 11, 2008#16
If your car won't start with 5w oil in there, move somewhere WARMER ;) the 5W is Winter oil. Otherwise pick a real SYN with high percentage PAO basestock for winter.
aND THAT k&N aint no thang, no big deal, WIX is all you need, works better than the toyota on my sisters machine!
- the bro
1stToyotaOklahoma · Dec 11, 2008#18
Originally Posted by TheSilkySmooth ↑
Just keep ALL the paperwork in your owners manual in the glove box. Receipts, dates RO's. I always ask for RO printout of any work done even at dealer so thier computer database doesn't go "mysteriously" off line during a warranty issue.

AFA oil and filter - tried 'em all over the years - settling on MOTUL 8100 eco-nergy (not in stores, imported from europe, from LTB motorsports online) and Wix filter but for the 2AZFE 2.4L motor - just a bit bigger but same specs. Car runs perfect now with this stuff - it didn't before.
51396 filter? If so, yeah, looks exactly the same except for being about a 1/2 inch taller. Same micron rating and flow rate. Too bad I had 3 Ea filters in stock already.
Klink10910 · Dec 11, 2008#19
Originally Posted by 1stToyota ↑
Who makes K&N oil filters?
Champion, same folks who make the Supertechs from WalMart.
jkuchtaL.A. · Dec 11, 2008#20
I myself run Motul 300V 5W-30, and the amsoil filters. The oil is expensive and tough to find, but worth it.


On a side note, I would not go with a 0W-30 oil. during normal driving, I have not seen oil temps higher than about 90 degrees C, and have only seen temps at or above 100 degrees C on the track. Note that multigrade oil dosen't get to its "hot" number until it hits 100 Degrees C, which means the 0W oil may be much thinner once the engine is warm in the yaris (due to the low operating temp.) than a 5W oil.
TamagoOff Grid · Dec 12, 2008#21
just curious, what makes "expensive oil worth it" ?

oh and FYI, CHEVRON has the best purification capabilities of ANY oil manufacturer.
1stToyotaOklahoma · Dec 12, 2008#22
Originally Posted by Tamago ↑
just curious, what makes "expensive oil worth it" ?

oh and FYI, CHEVRON has the best purification capabilities of ANY oil manufacturer.
The base on Amsoil is about as pure as it gets, but I'm not so worried about that. It's the additive packages that go back in that make the oil, not the base.
gidNortheast · Dec 12, 2008#23
to me , paying $12 > $14 a quart is overkill . Especially while under warranty and having to change oil every 5,000 miles or less until the 60,000 mile powertrain is over . Then maybe I'll consider it . PENNZOIL Platinum full synthetic has U.O.A. results that are close to those of AMSOIL at $4.00 a quart ( or less ) . Go to www.bobistheoilguy.com for comparisons under USED OIL ANALYSIS - Gas ( engines ) . Currently using SHELL full synthetic 5w-30 which is $4.50 (including tax) a quart at BJs WHOLESALE with trial MEMBERSHIP . Using it for both '08s ( sedan + L.B. ) . This has good U.O.A.s as well .
1stToyotaOklahoma · Dec 12, 2008#24
I'm doing 5K OCI, but I'm not using the regular XL Amsoil, I'm using Amsoil HP 25K oil, ACEA A5/B5 rating, $6.60 per qt (no tax) ...I've paid much more than that for inferior oils in the past.

The engine was noticably noisier when filled with Eneos 5w-30 and Nippon filter.
gidNortheast · Dec 12, 2008#25
must be they charge more for the AMSOIL in our region , that being the NORTHEAST .
TamagoOff Grid · Dec 12, 2008#26
oil schmoil

keep it clean, change it often.... call it good..
SilverGlowSouthern California · Dec 12, 2008#27
Originally Posted by mikenacarato ↑
when i asked the dealer they said 5w30 and only 5w30
My dealer showed me a TSB (published by Toyota) and he told me to use 5w-20 only, regardless of what the manual says, and regardless of what is printed on my valve cover cap.
SilverGlowSouthern California · Dec 12, 2008#28
Originally Posted by jkuchta ↑
I myself run Motul 300V 5W-30, and the amsoil filters. The oil is expensive and tough to find, but worth it.


On a side note, I would not go with a 0W-30 oil. during normal driving, I have not seen oil temps higher than about 90 degrees C, and have only seen temps at or above 100 degrees C on the track. Note that multigrade oil dosen't get to its "hot" number until it hits 100 Degrees C, which means the 0W oil may be much thinner once the engine is warm in the yaris (due to the low operating temp.) than a 5W oil.
What you wrote contradicts the data-sheets published by AMSOIL, Pennzoil, Mobil Oil, and ALL the major synthetic makers of 0w-20, 5w-20, 0w-30, and 5w-30.

I guess you know more then their scientists, and tribologists.... 😆

The fact is, 0w-20 and 5w-20 show the same viscosity at operational temperatures (around 212F).

The fact is, 0w-30 and 5w-30 and 10w-30 and stright 30 weight have the same viscosity at 212F too, as their differences are too small to be significant.

For example, AMSOIL's 0w-30 protects THE SAME or better then any brand's 5w-30 or 10w-30 or straight 30 weight oil at full operational temps.

I really wish you would stop propagating outright lies and mistruths here.
jkuchtaL.A. · Dec 12, 2008#29
I don't think you read my post Silverglow.

What I said is that I haven't seen the oil in my car get near 212 F under normal driving conditions. Because the second viscosity number is measured at 212 F in the lab, it would stand to reason that a multigrade oil's "Hot" viscocity would not be met at temps lower than 212 F. Basically, the Yaris doesn't heat its oil up to 212F until you really start beating on it (It takes like 15min. on the freeway in the morning for the oil temp to hit 80 degrees C (176F), and it dosen't really go above 86 degrees C after that...even in heavy traffic!). It would therefore stand to reason that at a given temp below 212 F, a 0W-30 oil would be thinner than a 5W-30 oil. If someone could show me a graph of each multigrade oil's viscocity vs. temp I would be very appreciative.

Tamago....

What makes the expensive Motul oil worth it to me is the fact that it's an Ester based oil. No cheap PAO's or "super-cracked" dino for my hatch!
I drive the car pretty hard, and don't mind spending a little extra for the best. Everyone is free to choose the oil they want to spend their money on, and I choose Motul.
Chevron may have the best filtering process for petrolium in the industry, but the oil I use is not petrolium based, which kind of makes that point moot.
1stToyotaOklahoma · Dec 13, 2008#30
Originally Posted by SilverGlow ↑
My dealer showed me a TSB (published by Toyota) and he told me to use 5w-20 only, regardless of what the manual says, and regardless of what is printed on my valve cover cap.
And regardless of what that Toyota TSB actually says?

It clearly states that 5w-20 is fine to use now, but the note at the top of the TSB says to stick with what's listed in the service manuals, owner's manual and oil cap, which happens to be 5w-30.

Looks like the dealer drew his own conclusions about what's best, just like you did when you started using and recommending Yaris owners to use 0w-20 because of UOAs for non-Yaris motors, and because the TSB said 0w-20 was okay to use in a Corolla, Scion XD, etc...but if I can read between the lines I'm guessing that you drained out the 0w-20 and took the dealer's advice about the 5w-20.
1stToyotaOklahoma · Dec 13, 2008#31
Originally Posted by gid ↑
must be they charge more for the AMSOIL in our region , that being the NORTHEAST .
It's probably expensive everywhere, I'm just getting a good deal on it because I know the guy. If I didn't have that connection I'd be using Pennzoil Platinum because of its high ratings, and because I can get it for nearly the same price that I pay for dino Valvoline.
ChupacabraCT · Dec 13, 2008#32
You would have to snot the hell out of the Yaris to get the oil remotely close to 212 degrees.
TheSilkySmoothNew Hampshire · Dec 15, 2008#33
Our Camry engine is dead now from dealer using the 5W-20 ONCE on a tsb. My Spouse did not "hear" the engine disintegrating and I didin't find out until I went for a trip to her friends house. I said to her, " ... your engine has spun a rod beaing - get it to the dealer right away!", But Now she is 4000 miles OVER the warranty and we are S>O>L and money and good car.

So all you 20-weight proponents can stick it in your ear. This engine ran good on the 5W30 oil I was putting in. Dealer wrecked it. I will Trade for Nissan Rogue or sinilar, and Silver"worm"glow can buy my spouses destroyed trade-in because the oil is perfect. Moronic Nonsense!

Papa
TheSilkySmoothNew Hampshire · Dec 15, 2008#34
Any Engine oil should run over 100C in warm climate on normal 10 mile commute to boil off H-O-H. The Coolant jacket cycles to 90C, under the piston dome and around valve pockets should be significantly hotter getting oil over the BP. I dont have sump guage installed either so I cabnnot confirm - I dont RACE the little yaris plus its Sis' car.

-the Bro
nsmitchellRichmond, VA · Dec 15, 2008#35
Originally Posted by TheSilkySmooth ↑
Our Camry engine is dead now from dealer using the 5W-20 ONCE on a tsb. My Spouse did not "hear" the engine disintegrating and I didin't find out until I went for a trip to her friends house. I said to her, " ... your engine has spun a rod beaing - get it to the dealer right away!", But Now she is 4000 miles OVER the warranty and we are S>O>L and money and good car.

So all you 20-weight proponents can stick it in your ear. This engine ran good on the 5W30 oil I was putting in. Dealer wrecked it. I will Trade for Nissan Rogue or sinilar, and Silver"worm"glow can buy my spouses destroyed trade-in because the oil is perfect. Moronic Nonsense!

Papa
If the TSB was followed, I would contact Toyota for a new engine, covered under "Special Warranty". If you can prove the 5W-20 "caused" the damage, you will get your new engine.
TamagoOff Grid · Dec 15, 2008#36
Originally Posted by nsmitchell ↑
If the TSB was followed, I would contact Toyota for a new engine, covered under "Special Warranty". If you can prove the 5W-20 "caused" the damage, you will get your new engine.
most dealers pump oil out of a common 500 gallon tank.. they use recycled oil, whatever the local petroleum supply sells..

it's crap oil..

but seriously, a 30 to 20 weight change on the high end of viscosity is NOT GOING TO SPIN A BEARING. there has to be another factor that caused the damage.
slvryarisIndiana · Dec 15, 2008#37
I am running Royal Purple 5W-30 and Wix filter in mine. Seems to be doing real well and runs alot smoother and quieter.
ShroomsterOrlando · Dec 15, 2008#38
Originally Posted by TheSilkySmooth ↑

-the Bro


Papa


Please for the love of god get separate screen names
linnyMn · Dec 16, 2008#39
I use mobile 1 synthetic 0w20 oil in my yaris since my first oil change. I live near the coldest city in North America and my yaris seems to be quite happy with the thin oil at start up. This morning it was -32 F when I turned the key and it came right to life..
After switching to this grade oil I noticed a 3mpg increase in gas mileage.
Now, if I could only get some good heat in the cabin..
TheSilkySmoothNew Hampshire · Dec 16, 2008#40
Originally Posted by Tamago ↑
most dealers pump oil out of a common 500 gallon tank.. they use recycled oil, whatever the local petroleum supply sells..

it's crap oil..

but seriously, a 30 to 20 weight change on the high end of viscosity is NOT GOING TO SPIN A BEARING. there has to be another factor that caused the damage.
Why not? This is operating end of spec, And the viscosity is much less. SAE 30 is ~ 65% more viscous than SAE 20. 5.6 vs 9.3 cSt MIN. That bearing wont run out of hydrodynamic range too long before it gets hammerd egg shape at the top center of the top bearing shell, rod big end. Then you have Clack clack clack. Easily predictable failure - ignoramus EPA pushing AUtomakers to show higher CAFE numbers, Stupid managers making stupid decisions. Lucky toyota with the 60K engine warranty. I'll trade car at dealer that ruined it. I'll run 60W race oil to get it there.

- bro
TheSilkySmoothNew Hampshire · Dec 16, 2008#41
Originally Posted by Shroomster ↑
Please for the love of god get separate screen names
Got it, schroom, the Fam is getting silly. Sis is kicked off because the site is "too technical" with not enough Trance and Disco discussions .... and .... she didn't get any marriage offers. Maybe if she would shave ANYWHERE once in a while she might have some luck😆
ChupacabraCT · Dec 16, 2008#42
There is no way in hell you spun a bearing due to the change from 5-30 to 5-20. Try putting some oil in the car.....
gidNortheast · Dec 16, 2008#43
geesh ... talk about being to the point ...
SilverGlowSouthern California · Dec 16, 2008#44
Originally Posted by 1stToyota ↑
And regardless of what that Toyota TSB actually says?

It clearly states that 5w-20 is fine to use now, but the note at the top of the TSB says to stick with what's listed in the service manuals, owner's manual and oil cap, which happens to be 5w-30.

Looks like the dealer drew his own conclusions about what's best, just like you did when you started using and recommending Yaris owners to use 0w-20 because of UOAs for non-Yaris motors, and because the TSB said 0w-20 was okay to use in a Corolla, Scion XD, etc...but if I can read between the lines I'm guessing that you drained out the 0w-20 and took the dealer's advice about the 5w-20.
Nope, I'm still running 0w-20 because I know that at operational temps 0w-20 and 5w-20 provide the SAME protection. And the UOA's I've seen are for Yaris SPECIFICLY.

I have the TSB in front of me and it says that the Yaris engine can use the 20 weight. So where is the confusion? Where is the ambiguity?

It's very, very clear. If you have a Yaris, you can use 20 weight safely, and Toyota is behind what I wrote.

And if you look at the AMSOIL site (and Mobil1 too), you too will see that their 0w-20 can be used in ANY MOTOR that is spec'd for 5w-20. Safely.

So is your beloved AMSOIL wrong? Not!
SilverGlowSouthern California · Dec 16, 2008#45
Originally Posted by TheSilkySmooth ↑
Our Camry engine is dead now from dealer using the 5W-20 ONCE on a tsb. My Spouse did not "hear" the engine disintegrating and I didin't find out until I went for a trip to her friends house. I said to her, " ... your engine has spun a rod beaing - get it to the dealer right away!", But Now she is 4000 miles OVER the warranty and we are S>O>L and money and good car.

So all you 20-weight proponents can stick it in your ear. This engine ran good on the 5W30 oil I was putting in. Dealer wrecked it. I will Trade for Nissan Rogue or sinilar, and Silver"worm"glow can buy my spouses destroyed trade-in because the oil is perfect. Moronic Nonsense!

Papa
There are MILLIONS of Camry and other Toyota vehicles running 20 weight right now. MILLIONS. And those MILLIONS have no engine problems.

MMMMIIIIILLLLLLLLIIIIOOONNNSSSSS. All over the nation.

I would suggest an adult night school course in statistics for you. It seems you need to educate yourself.
gidNortheast · Dec 16, 2008#46
the day I see 5w-20 stamped on the oil cap of an YARIS is when I'll consider using a 20 weight . Has to be same engine as the '07 > '09s .
SilverGlowSouthern California · Dec 16, 2008#47
Originally Posted by gid ↑
the day I see 5w-20 stamped on the oil cap of an YARIS is when I'll consider using a 20 weight . Has to be same engine as the '07 > '09s .
Then use 0w-30 and be happy.
gidNortheast · Dec 16, 2008#48
nope , no 0w-30 , not stated in the owners manual . Stick with 5w-30 until further notice .
ChupacabraCT · Dec 16, 2008#50
Originally Posted by gid ↑
geesh ... talk about being to the point ...

I apologize for the acuteness of the post but let's be real. I mean, that was/ is a blatant lie. There is a much, much highter liklihood that the oil pan was dry and he spun a bearing than he did from using 20wt. I hate when people blatantly lie like that and try to whip up everybody in a frenzy.