Yarisworld Archive

ABS and "!" lights are ON again!

428 posts · 473,304 views · page 5 of 9

Replies continued

mojoyarisVancouver · Feb 26, 2010#201
I never liked the ABS in the Yaris. It kicked in too early for my taste. However since you wanted it in the first place it should be working in the first place. I totally agree with you and how Toyota should be doing something. Especially in light of all of this.

Have to say, I'm really dissapointed in them. It'd be nice for them to give me a call and prove otherwise.

Toyota, Lexus Canada, Hope you're reading this and give me a shout. You know who I am. Ask Chad.
Red CellVancouver BC · Feb 27, 2010#202
Interesting.

My wife's pre-owned 2006 Yaris RS Auto-Hatch isn't even "3 hrs old" and I see that the dreaded ABS light has come on (was not there during the test-drive). Since we are fortunate enough to still have 1 year on the extended "and" 90 days bumper-bumper, I've already made the call to the dealership and have an apt for Tuesday.

Geez, we'll see how this turns out.

Red Cell.

Re: 37,500km's
devinlamotheSudbury, Canada · Mar 3, 2010#203
Guys, Ottawa is now investigating Toyota. PLEASE PLEASE PLEASE if you have not already, lodge a complaint with the Transport Canada Complaint Dept. so they will see this IS an issue that needs to be resolved:

https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/PCDB-BDpp?Index

Remember, the more people complain, the more Ottawa will have a case to pressure Toyota into doing something!
jznomoneyPA · Mar 16, 2010#204
Is there a repair guide for this problem? A picture of the faulty harness and such?
onizukaThread starterToronto · Mar 16, 2010#205
It would seem that once was enough for Toyota North America President Yoshimi Inaba. Just weeks after the top Toyota executive went before a congressional hearing in the United States, The Globe and Mail is reporting that Inaba has turned down a similar invitation to appear before the Canadian government. The topic of conversation? Why, the massive Toyota recall efforts and safety, of course.

Officials for the Harper Administration in Canada are expressing a great deal of disappointment at the apparent snub, with Merv Tweed, the Conservative MP chairing the Toyota committee, going so far as to say that Inaba's no-show would amount to a slight to the Canadian government and people, suggesting that Toyota perceives that the "American market is more important."

The Canadian government reportedly plans to once again request that Inaba attend its hearings. If Toyota refuses the request, parliament could issue a subpoena to Inaba, though the Toyota executive neither lives nor works in Canada, meaning he could potentially avoid the summons by keeping out of the country entirely.

For its part, Toyota Canada claims it does not report to Inaba and notes that CEO Yoichi Tomihara and managing director Stephen Beatty will attend on behalf of the company.

UPDATE: Despite continuing to insist that Toyota North America President Yoshimi Inaba has no responsibility for matters regarding recall and safety issues in Canada, Toyota has relented and Inaba will appear before the Parliament of Canada today.

[Source: The Globe and Mail]
fidgellBarrie ON Canada · Mar 16, 2010#206
Originally Posted by jznomoney ↑
Is there a repair guide for this problem? A picture of the faulty harness and such?
As one who did "the clean" and fixed the problem, which hasnt come back yet, Ive been asked by quite a few for a photo of the connection concerned. I plan to get this done soon as Ive been really busy, Im no internet ace though and am looking at how to get the picture on the board!!!

Watch this space!!!
WeeYariGeorgetown, Ontario, Canada · Mar 16, 2010#207
Originally Posted by fidgell ↑
Im no internet ace though and am looking at how to get the picture on the board!!!
Should help you.

FAQ: How to post pictures
fidgellBarrie ON Canada · Mar 17, 2010#208
Originally Posted by WeeYari ↑
Should help you.

FAQ: How to post pictures
Thanks for that, Im changing out of the winter wheels this weekend so Ill take the pictures then and get them on here soon as I can.....
paulyatesEurope · Mar 17, 2010#209
Here's a pic of the ABS Sensor plug.
Credit to poster in Hub Spacer thread.
These are the front sensors I think, but would not imagine a big difference.

PY

1 attachment not included in this copy

jznomoneyPA · Mar 22, 2010#210
is there a way to disable abs for now like a fuse till i get to look at the sensors? Also when the abs light comes on, i hear a humming sound for a second then the brakes make a weird sound, then the light comes on. Then I can brake without abs, just normal brakes.
Bluevitz-rsOshawa, Ontario, Canada · Mar 22, 2010#211
Yeah, there should be an ABS relay you can pull from the fuse panel under the hood.
jznomoneyPA · Mar 22, 2010#212
I found in the manual a fuse number 8 30a says abs2 and a fuse number 46 50a says abs1. Does that sound right?
Bluevitz-rsOshawa, Ontario, Canada · Mar 22, 2010#213
You should have a relay in there that says ABS.
jznomoneyPA · Mar 22, 2010#214
so its not abs1 or abs2 on this diagram?

1 attachment not included in this copy

Bluevitz-rsOshawa, Ontario, Canada · Mar 22, 2010#215
Yeah, pulling thee will disable the ABS but will also dissable the VSC. My echo has a relay that I can pull. I just figured the Yaris had one too.
fidgellBarrie ON Canada · Mar 30, 2010#216
So, its been a few months and the problem hasnt returned!!! Ive switched back to summer wheels so shouldnt see it again this year at least... anyway here's pictures of the affected site for those who messaged me. Sorry it took so long!

2 attachments not included in this copy

LuxleyMuskoka · Apr 22, 2010#217
Thanks for the Fix folks!! Warning Lights were on all last winter. When I called the local dealer they played dumb with dollar signs in their eyes!! I can't image all the sensors that have been changed at the expense of owners all because of a poorly designed connection. I am going to try to silicone the entire connector before next winter. Mabye this will keep the slush out?! Would be nice if Toyota pulled up their socks on this obvious weak link in the Yaris Braking System.
JakeOntario · Apr 22, 2010#218
It disappeared.
Must be the good weather.
I'll make sure not to panic when it reappears in the winter and will just take out the fuse for the abs.

I guess they'll never come clean on this problem because there is money to be made for replacing of their defective parts.
TheisbjDenmark · May 17, 2010#219
I just got the same problem. Both the VSC and ABS lights are on.

My Toyota Yaris is from february 2007 and they say it will cost me 9300 DKR or 1550$.
Thai_DangLos Angeles · Sep 15, 2010#220
My ABS lights just came on this morning! WTF its only 3 months old. I had to manually shift it out of park by popping off the tab and pushing the white thing. Toyota what a fail.
DaveToronto · Nov 10, 2010#221
Bumping this thread because it's almost winter again, and people may want to check their sensors when they change over to winter tires.

I'm thinking of switching my tires in the next three weeks, and was planning on cleaning the speed sensors (thanks to fidgell for the picture in post 232!) while I've got things apart. My warranty is up and I'm not paying $800 for a garage to do this for me.

So, for those that have successfully done the fix, I clean the dirt out of the sensor connectors with WD40 and compressed air, then top it off with a little dielectric grease before snapping it back together?
craigqOttawa · Dec 10, 2010#222
Originally Posted by Dave ↑
Bumping this thread because it's almost winter again, and people may want to check their sensors when they change over to winter tires.
I wish I would've back in November... We had our first couple of days of snow and salt on the roads, and the brake and ABS warning lights showed up on the dash. I cleaned the connections and lubed them with some dielectric grease this afternoon. Hopefully it works 😳
DaveToronto · Dec 13, 2010#223
I wish I would've taken my own advice too 😳

I didn't do it when I changed my tires and now the lights are on. Do I actually have to take the tires off to get to the sensors, or can this be done with the tires still on? I'll have a chance to look at it this weekend, and I'll try to make due without the ABS in the meantime.
craigqOttawa · Dec 14, 2010#224
I think it's easier to just remove the tires. From what I could see the orange rubber seal on the sensor wiring plug-end (the cheaper $50 part) displaces a bit too much when the sensor wiring plug is inserted into the sensor receptacle on the hub (the expensive part). This is probably allowing the salty water mixture in and the electrical connection goes wonky.
mleon4740Newmarket · Dec 15, 2010#225
Guys... here a new dissatisfied Toyota 2007 Yaris customer, had the ABS and Emergency Brake lights ON since yesterday, my warranty expired six months ago, has anyone heard of a change in Toyota's response to this type of problems? (Posted Dec 15th 2010)
CB900F2Toronto · Dec 16, 2010#226
Add me to the list of defective rear ABS speed sensors...

So far, they claim just the right-rear is defective, and they ordred the harness and hub. and they are back order.

I am fighting for them to replace the left side also under warranty as I do not want to get bitten in the a** with a repair bill if the left side goes bad for a know design fault..
yaris2010RSAngus, Ontario · Dec 17, 2010#227
sorry but there are 14 pages so forgive me, but how can we "preserve" the life of our sensors?
WeeYariGeorgetown, Ontario, Canada · Dec 17, 2010#228
Originally Posted by yaris2010RS ↑
sorry but there are 14 pages so forgive me, but how can we "preserve" the life of our sensors?
Post#170

Originally Posted by asiliat ↑
Yep, ABS works again for me too. I used WD40 and then dielectric grease to coat the plug to keep salt out going forward. When I switch between summers/winters, I'll probably wipe and re-coat as needed.

Yes, definitely need a screwdriver. Pry the tab gently open at the top, and then push it out and away from the drum brake itself (I used the same screwdriver - flat head to push it out). Make sure to use WD40 or the like and soak it for a couple of minutes before trying to remove, minimizing risk of breaking the clip. It should make a small "pop" sound when it comes off.

BTW, I joined the forum JUST thank you for reporting this fix. :D
Toyota has 'recognized', and 'fixed' the issue with 2009+ model years. You should not be a victim of this premature failure.
R35c470rSlovenia · Dec 22, 2010#229
hi
i had the same problem, abs signal was turned on - abs didn't work. Mechanic said the right back sensor is not ok but abs signal disappear and again turned on after two day.
tell me something. if abs signal turn on than abs doesn't work, what about VSC.
DaveToronto · Dec 27, 2010#230
Does anyone have any specific pointers on how to get the sensor apart from the hub for cleaning?

I got the outer housing off, like asiliat said in post 170, but is that all there is to it? I just saw the two wires going into another plastic plug which goes into the hub. Nothing there looked particularly dirty. Should've taken some pictures when I had it apart.

I'm assuming that the actual plug has to disconnect from the hub and be protected with grease (but maybe I'm wrong).

The picture in post 225 looks like the whole plug comes off.

I could use some guidance from someone who's done the fix, please.
craigqOttawa · Dec 30, 2010#231
Dave, it sounds like you only removed the connector cover. You have to pry carefully from the bottom to get the connector itself off, that's the piece with the two wires. Pry from the bottom portion of the connector with a really thin slot screwdriver as shown in the picture in post 225. This is also covered in the "axle.pdf" file of the FSM found on this site. The connector holes are very small, it doesn't take much to clean the area and lubricate with the dielectric grease...


4. DISCONNECT SKID CONTROL SENSOR WIRE (w/
ABS)
(a) Using a screwdriver, remove the claw of the
connector lock portion and disconnect the skid
control sensor wire connector.
NOTICE:
Do not remove the connector cover from the
connector because the skid control sensor wire
may be damaged.
DJCrazyChrisOntario · Jan 5, 2011#232
Another winter another trip to the dealership....less than a month on our extended care warranty. Replaced the one last year free of charge (took 5 weeks to wait for the part). Hopefully not as long this year.
DaveToronto · Jan 5, 2011#233
Awesome work and great post.

Even if Toyota won't issue a proper recall (like I think they should) it would be nice if they could at least stick with the $50 fix instead of charging their customers upwards of $700 to replace their own faulty materials.
bigdaddyhameToronto · Jan 6, 2011#234
Hello... my wife's 2007 Yaris Sedan >80k kms has just started showing the abs/! light issue as well. Add us to any and all complaint and or recall encouragement lists... I've printed off some of the materials here to take to our mechanic just in case but for the time being we don't mind the lack of ABS. While it sucks that we are clearly not alone in this at least we can share information and help eachother even if Toyota won't stand behind their defective system and issue a recall. Filling out a transport canada complaint this evening.
AndymeoScarborough · Jan 10, 2011#235
Unfortunately my car has the same problem come out today, both the ABS light and brake light ON. Don't know what I can do. Warrenty expired a year ago and I still need to keep the lease for another year. Too bad.
AndymeoScarborough · Jan 11, 2011#236
Just file a complaint at Transport Canada.
limochongyyz · Jan 11, 2011#237
Hi Guys~
I have 2007 Sedan model also...the other day both parking brake and ABS lights came on then both went off inself after driving it about 30mins. A few days later those two lights came on again then went off itself...after reading up on these posts i went to check under the car (both rear speed sensor wires and connectors). After observing i did not see any chafed or broken wires and damage to connectors. After cleaning the connectors and sensor areas with contact cleaners and re-connected them back.
I was fortunate to see no damage to wires or connectors. So far i don't see any problems with parking brake and ABS light. I think it's fixed for now~

P.S. I did check with OBD II but like the others peoples there was no fault code shown.(at least my case)
I do not know why it did not record any fault code in computer??
CTScottUSA, CT · Jan 11, 2011#238
Originally Posted by limochong ↑
Hi Guys~
I have 2007 Sedan model also...the other day both parking brake and ABS lights came on then both went off inself after driving it about 30mins. A few days later those two lights came on again then went off itself...after reading up on these posts i went to check under the car (both rear speed sensor wires and connectors). After observing i did not see any chafed or broken wires and damage to connectors. After cleaning the connectors and sensor areas with contact cleaners and re-connected them back.
I was fortunate to see no damage to wires or connectors. So far i don't see any problems with parking brake and ABS light. I think it's fixed for now~

P.S. I did check with OBD II but like the others peoples there was no fault code shown.(at least my case)
I do not know why it did not record any fault code in computer??
A standard OBDII reader can't read fault codes from the ABS ECU. You need a Toyota TechStream Tool or an enhanced diagnostic tool to read fault codes from any ECU other than the ECM.
limochongyyz · Jan 11, 2011#239
Oh I C~~ thanks for the info CTScott.

FYI guys mine had 73,000Km right now
CTScottUSA, CT · Jan 11, 2011#240
By the way, you can actually read the DTCs using just a jumper wire:

With the ignition off, jump the CG and TC pins on the OBD connector:

Picture not included in this copy

Turn the ignition on and watch the ABS light. If there are stored DTCs, It will flash in a pattern to indicate the code (71 for example will be shown as 7 quick flashes, a short pause, and then one quick flash).


C1271/71 Low output signal of front speed sensor RH
• Front speed sensor RH
• Front speed sensor RH circuit
• Sensor installation
• Foreign matter on sensor tip or sensor rotor
C1272/72 Low output signal of front speed sensor LH
• Front speed sensor LH
• Front speed sensor LH circuit
• Sensor installation
• Foreign matter on sensor tip or sensor rotor
C1273/73 Low output signal of rear speed sensor RH
• Skid control sensor RH
• Skid control sensor RH circuit
• Sensor installation
C1274/74 Low output signal of rear speed sensor LH
• Skid control sensor LH
• Skid control sensor LH circuit
• Sensor installation
C1275/75 Abnormal change in output signal of front speed
sensor RH
• Front speed sensor RH
• Front speed sensor RH circuit
• Foreign matter on sensor tip or sensor rotor
C1276/76 Abnormal change in output signal of front speed
sensor LH
• Front speed sensor LH
• Front speed sensor LH circuit
• Foreign matter on sensor tip or sensor rotor
C1277/77 Abnormal change in output signal of rear speed
sensor RH
• Skid control sensor RH
• Skid control sensor RH circuit
C1278/78 Abnormal change in output signal of rear speed
sensor LH
• Skid control sensor LH
• Skid control sensor LH circuit

1 attachment not included in this copy

Carrot TopToronto, Ontario CANADA · Jan 13, 2011#241
[QUOTE=dadi_oh;205097]He also made some odd comment about how it could happen if you got stuck and ended up spinning the front wheels. ???? 🤷 Doesn't make any sense to me.


My lights came on AFTER I was going up Clifton Hill in Niagara Falls, Ontario. It was snowing like crazy, the roads were not plowed and I had to go up the hill. I don't have snow tires and because of this my tires were spinning...it was so slick out. I felt that if I had taken my foot off the acclerator, I would have slid and gone backwards, it was that bad out!

Anyways, I took it to the dealership today and it is covered under the extended warranty but they wanted me to pay a $112.00 diagnostic charge...lucky for me, I had talked to a Manager and he told me that they have to charge this amount but if the part is covered under warranty, you don't have too...so beware of dealerships trying to charge you!!
The part is backordered, I agree with everyone else, this should be a recall for Yari that are subjected to snow.
'LilRedYarisBayport, MN · Jan 14, 2011#242
Well, started my car (2007 Yaris Sedan) @ 6:30ish AM to warm it up and noticed the (ABS) and "Brake" light were lit. Tested my E-brake momentarily - no change. After thumbing through the manual and seeing that having both the ABS light and Brake light lit were signs to not drive & call the dealer, I sat and cursed for a few moments. Briefly tested the brakes in the driveway. Seemed to work fine. After both wondering if I should risk the drive to my morning class and consulting with a relative - I risked it & drove. Gingerly made my way through the snowy/salty slop to school. Then after class made it the (thankfully) short distance from school to the dealer (the very same dealer I had bought the car from). After driving the car into the svc. bay, I was greeted by being told a $120 would be applied as a diagnostic charge. After staring wide eyed at the service guy and expressing my disbelief, I reluctantly agreed - after all I was trying to do the right thing. Right?

To make a long story short... It was the right-rear wheel speed sensor harness. I was told there was 1 available locally and it would take awhile to get my car worked on. Told them to get it done.
After writing a note to my former sales guy expressing my concern over the $120 charge and leaving for a bit, I returned to the dealer. Talked w/ my sales guy only to find out that this fix wasn't under warranty (since it wasn't powetrain/tranny related). He tried talking w/ the service manager, vouching for me and tried getting the service charge eliminated. No dice. He sincerely apologized to me and I paid up and left. Disappointed. $220.35 total out of my pocket. Some of you may know that I bought this car Certified Used last May. My first Toyota, and first newish/modern car. Love it's driveability, reliability, and ease of use. Didn't like this situation too much though. Well, it can only get better, right? I live in a winter wonderland...

I should add: Today the car broke 50,000 Miles too. I bought it with little over 42,000 on the Odometer.
beZzZUnionville/Markham, ON · Jan 14, 2011#243
Both my abs and battery warning light were on whenever it's raining, it was before I changed my 06 alternator to a used 09 one. And since then, luckily, both of them are never on again. Even now it's snowing almost everyday here.

Just wondering would it be the alternator causing the real problem.
Carrot TopToronto, Ontario CANADA · Jan 14, 2011#244
[QUOTE='LilRedYaris;547620] He sincerely apologized to me and I paid up and left. Disappointed. $220.35 total out of my pocket. Some of you may know that I bought this car Certified Used last May. My first Toyota, and first newish/modern car. Love it's driveability, reliability, and ease of use. Didn't like this situation too much though. Well, it can only get better, right? I live in a winter wonderland...

So you got it fixed for $220.35?! I was told it is $700.00...thank God I got the extended warranty or I wouldn't get it fix. It is VERY disappointing to have that kind of repair...
limochongyyz · Jan 14, 2011#245
Originally Posted by CTScott ↑
By the way, you can actually read the DTCs using just a jumper wire:

With the ignition off, jump the CG and TC pins on the OBD connector:

Attachment 39321

Turn the ignition on and watch the ABS light. If there are stored DTCs, It will flash in a pattern to indicate the code (71 for example will be shown as 7 quick flashes, a short pause, and then one quick flash).


C1271/71 Low output signal of front speed sensor RH
• Front speed sensor RH
• Front speed sensor RH circuit
• Sensor installation
• Foreign matter on sensor tip or sensor rotor
C1272/72 Low output signal of front speed sensor LH
• Front speed sensor LH
• Front speed sensor LH circuit
• Sensor installation
• Foreign matter on sensor tip or sensor rotor
C1273/73 Low output signal of rear speed sensor RH
• Skid control sensor RH
• Skid control sensor RH circuit
• Sensor installation
C1274/74 Low output signal of rear speed sensor LH
• Skid control sensor LH
• Skid control sensor LH circuit
• Sensor installation
C1275/75 Abnormal change in output signal of front speed
sensor RH
• Front speed sensor RH
• Front speed sensor RH circuit
• Foreign matter on sensor tip or sensor rotor
C1276/76 Abnormal change in output signal of front speed
sensor LH
• Front speed sensor LH
• Front speed sensor LH circuit
• Foreign matter on sensor tip or sensor rotor
C1277/77 Abnormal change in output signal of rear speed
sensor RH
• Skid control sensor RH
• Skid control sensor RH circuit
C1278/78 Abnormal change in output signal of rear speed
sensor LH
• Skid control sensor LH
• Skid control sensor LH circuit
Thanks to CTScott, checked my OBD connector and jumped those two pins
confirmed that i have 73.

But there was also other lights were also blinked like transmission, airbag, P/S. etc
what are these CTScott??
devinlamotheSudbury, Canada · Jan 17, 2011#246
Originally Posted by beZzZ ↑
Both my abs and battery warning light were on whenever it's raining, it was before I changed my 06 alternator to a used 09 one. And since then, luckily, both of them are never on again. Even now it's snowing almost everyday here.

Just wondering would it be the alternator causing the real problem.
That's not the same problem. Our problem is the ABS and parking brake light on, not the battery.
blueswanLindsay Ontario · Jan 19, 2011#247
Can anyone tell me where I would access the Canadian version of the TSB? My ! and ABS light just came on last night driving home in a snowstorm. I'd like to just replace the necessary parts rather than the whole assembly if I can, the dealership of course quoted me for the hub & sensor wiring.

Can I get instruct them to replace just the sensor wiring? How will I know that it is just the wiring and the hub is not required? I'm no techie with cars so I wouldn't know if thats a reasonable request.

I have a 2007 Yaris with 170,000 km on it.

Any advice would be appreciated, keeping in mind that I am not knowleadgeable about cars.

Regards and thanks,

Chris.
CTScottUSA, CT · Jan 19, 2011#248
Originally Posted by blueswan ↑
Can anyone tell me where I would access the Canadian version of the TSB? My ! and ABS light just came on last night driving home in a snowstorm. I'd like to just replace the necessary parts rather than the whole assembly if I can, the dealership of course quoted me for the hub & sensor wiring.

Can I get instruct them to replace just the sensor wiring? How will I know that it is just the wiring and the hub is not required? I'm no techie with cars so I wouldn't know if thats a reasonable request.

I have a 2007 Yaris with 170,000 km on it.

Any advice would be appreciated, keeping in mind that I am not knowleadgeable about cars.

Regards and thanks,

Chris.

I haven't seen a source for Canadian TSBs, but if you look at the "Brake Control" section of the service manual (which is posted at the top of the DIY section), page 102 shows what's involved in replacing the senor/wire.

The wire is cheap (~$30), the sensor is a bit more (~$150), and the hub is ~$350. I would imagine that you'd have to add 2-4 hours of labor to that.

They probably just replace the whole mess, rather than taking the extra time to diagnose each portion of it.
CTScottUSA, CT · Jan 19, 2011#249
Originally Posted by limochong ↑
Thanks to CTScott, checked my OBD connector and jumped those two pins
confirmed that i have 73.

But there was also other lights were also blinked like transmission, airbag, P/S. etc
what are these CTScott??
Jumping TC to CG does the same for those systems as well.
blueswanLindsay Ontario · Jan 19, 2011#250
Thanks CTScott, appreciate it.

Regards,

Chris.