Yarisworld Archive

WTB: Scion Xd throttle body

74 posts · 25,449 views · page 1 of 2

PETERPOOPOriginal postOahu · Nov 19, 2008#1
Scion Xd throttle body for the intake manifold being made by richard.

Anyone have one or know where to get one?

Replies 73

gwasabiHonolulu, Hawaii · Nov 19, 2008#2
good luck trying to find one.....its like impossible. I've been looking for a while now. it cost 1200 at the servco hawaii parts department....
ztrack157Biggs, CA · Nov 20, 2008#4
Doesn't the Xd utilize the same Throttle body as the TC.
FunctionSpec626, Southern California · Nov 20, 2008#5
Just get a 05 corolla TB or you can go with a TC. Both fit on the stock Yaris manifold so with Richard's manifold you should get even greater flow.

I think the diameter opening of the TC TB is slightly bigger then the corolla TB. The xD TB should be closer in diameter to the corolla TB since they are both 1.8L engines.
gwasabiHonolulu, Hawaii · Nov 20, 2008#6
Well I figure It should be the same but not from what i hear. I don't want the engine to throw a CEL if I get too big of a diameter. servco is a rip
PETERPOOPThread starterOahu · Nov 20, 2008#7
yah i saw threads before the hack about the carolla TB but didn't read much on it. i know people do the TC TB, i guess either of those would be better than the stock!
FunctionSpec626, Southern California · Nov 20, 2008#8
I've had the corolla TB on for about 10k miles. No problems with CELs using Simota CAI.
Malaya1221Torrance, Ca · Nov 20, 2008#9
^ which corolla TB do u have or are they all the same?
FunctionSpec626, Southern California · Nov 20, 2008#10
2005 and up Corolla TB. Off the 1ZZ-GE engine. Same on the Matrix as well. Just find the ones that are drive-by-wire.
thebarberGrand Rapids, MI · Nov 20, 2008#11
ive got a TB from a matrix sitting in my garage....
ROCKLAND TOYOTAROCKLAND COUNTY NY · Nov 20, 2008#12
Originally Posted by PETERPOOP ↑
yah i saw threads before the hack about the carolla TB but didn't read much on it. i know people do the TC TB, i guess either of those would be better than the stock!
stick with trying to find the xd one seeing as its a direct bolt on and richard has based ALL his findings on it. the other 2 have been used before with little or no problems but id stick with the scion one until richard chimes in other wise.....
ztrack157Biggs, CA · Nov 20, 2008#13
The problem with tracking down the Xd TB is the fact that the car hasn't been out long enough for these to be plentiful.
cali yarisCanoga Park, CA · Nov 20, 2008#14
yeah 2004 or earlier are cable --
PETERPOOPThread starterOahu · Nov 20, 2008#15
I didn't even know what the xd was. Those came out this year? I thought those were the new version of the xBs! Doh ahaha. Shows you how much i care about scion.
thebarberGrand Rapids, MI · Nov 20, 2008#16
had the corolla throttle body on my yaris for a few days, but decided not to really mod my yaris.....definitely added some horses....if youre interested, PM me
cali yarisCanoga Park, CA · Nov 20, 2008#17
The xD is the replacment for the xA, more or less.

xB is referred to now as first gen (1.5L) and second gen (2.4L)
CASTREXCosta Rica · Nov 20, 2008#18
Originally Posted by PETERPOOP ↑
I didn't even know what the xd was. Those came out this year? I thought those were the new version of the xBs! Doh ahaha. Shows you how much i care about scion.
xD is a grown up Yaris...😁


...oh and according to Richard's testing the larger TB was good only for a couple of extra hp. IMO the mod would be worth it only if you can source it for really cheap!

1 attachment not included in this copy

ROCKLAND TOYOTAROCKLAND COUNTY NY · Nov 20, 2008#19
Originally Posted by PETERPOOP ↑
I didn't even know what the xd was. Those came out this year? I thought those were the new version of the xBs! Doh ahaha. Shows you how much i care about scion.
supposedly those 5 lug hubs fit our car's also......
whooppee777Maryland · Nov 20, 2008#20
corolla TB works with no CEL's. seems to have less pep than the Tc TB but i had the Tc TB on for about a month and it had set 4 CEL's in less than an hour after i installed it.
PETERPOOPThread starterOahu · Nov 20, 2008#21
you throw cells with the TC tb? I heard if you put it on and just let your car idle, the ecu automatically adjusts to it?
pixiedixie862G-Hills, So Cal · Nov 20, 2008#22
try scionlife.com maybe youll find some luck there.
PETERPOOPThread starterOahu · Nov 21, 2008#23
thanks but no thanks :)

I rather talk to the yaris owners who've put the tc/xd tb on their yaris instead of going to a scion forum and asking them if they just so happen to know stuff about putting their tb on a yaris.
Malaya1221Torrance, Ca · Nov 21, 2008#24
Originally Posted by PETERPOOP ↑
Scion Xd throttle body for the intake manifold being made by richard.

Anyone have one or know where to get one?
Originally Posted by pixiedixie862 ↑
try scionlife.com maybe youll find some luck there.

i think pixiedixie is referring to ur question here!😕
PETERPOOPThread starterOahu · Nov 21, 2008#25
well she posted that after my questions about the TC tb throwing cells..



anyways, i doubt they'll have any. i'll just probably buy a carolla tb
pixiedixie862G-Hills, So Cal · Nov 21, 2008#26
Originally Posted by PETERPOOP ↑
well she posted that after my questions about the TC tb throwing cells..



anyways, i doubt they'll have any. i'll just probably buy a carolla tb

No need to be rude, but i was referring to your original question.
PETERPOOPThread starterOahu · Nov 21, 2008#27
i'm not being rude. i said no thanks?
Malaya1221Torrance, Ca · Nov 21, 2008#28
thinking about corolla tb myself...hope u get that tb!
thebarberGrand Rapids, MI · Nov 21, 2008#29
again, i have a corolla/matrix throttle body w/ dbw sitting in my garage if someone wants to buy it....

i had a 1zzfe throttle body on my yaris before, midrange and top end gains.....just decided to stay stock-ish for now...
ROCKLAND TOYOTAROCKLAND COUNTY NY · Nov 21, 2008#30
Originally Posted by thebarber ↑
i had a 1zzfe throttle body on my yaris before, midrange and top end gains.....just decided to stay stock-ish for now...
anyway to prove that.......
thebarberGrand Rapids, MI · Nov 21, 2008#31
Originally Posted by ROCKLAND TOYOTA ↑
anyway to prove that.......
any way to prove what? that i had it on the car?

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

lol, the honest truth of why i took it off was because it does cold-idle at higher rpms, and i didnt want my wife to know i modded the car.....i ran it for a bit w/o cel's, but took it off so my wife wouldnt find out....
ROCKLAND TOYOTAROCKLAND COUNTY NY · Nov 21, 2008#32
Originally Posted by thebarber ↑
any way to prove what? that i had it on the car?

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

lol, the honest truth of why i took it off was because it does cold-idle at higher rpms, and i didnt want my wife to know i modded the car.....i ran it for a bit w/o cel's, but took it off so my wife wouldnt find out....
could care less about pictures of it installed i was talking about your claim of more power in the mid range/ top end. i remember your problem of the high idle........
thebarberGrand Rapids, MI · Nov 21, 2008#33
Originally Posted by ROCKLAND TOYOTA ↑
could care less about pictures of it installed i was talking about your claim of more power in the mid range/ top end. i remember your problem of the high idle........
butt dyno only, sorry
PETERPOOPThread starterOahu · Nov 22, 2008#34
idled at high rpms? how high? is this normal with changing to a larger TB or was something wrong in his case?
gwasabiHonolulu, Hawaii · Nov 22, 2008#35
How long did it take you to install that? maybe like hour tops? I'm getting ready to do this project for a custom made intake system and I was wondering what kinda work is necessary for something like this.
FunctionSpec626, Southern California · Nov 22, 2008#36
Okay theres 2 minor problems with this mod:

1) High Idle at cold start. Forgot where it idles at since I usually just start up the car and go. I'll update soon when I remember to look down at my scangage. It usually goes away after about 10-15 secs of warming up but I guess if you live somewhere really cold it would take longer?

2) The car is kind of herky jerky when it goes in and out of DFCO. So in traffic or city driving with lots of stop signs, it just kind of gets annoying because sometimes if you're not careful, it feels like you ran into a brick wall, hahajp.
PETERPOOPThread starterOahu · Nov 22, 2008#37
well i wouldn't mind the high idle if it goes down after 10-15 seconds, but herky jerky huh? bleh.
gwasabiHonolulu, Hawaii · Nov 23, 2008#38
Hahaha I have a Hachi and it is REALLY jerky on DFCO. ITS SUPER FUN THOUGH! hahahaha Hows the responsiveness after the mod?
thebarberGrand Rapids, MI · Nov 24, 2008#39
i didnt find it too hard to install

i thought it drove fine

idle is high for the same length of time its high w/ a regular tb. its just the the throttle position sensor thinks that X% of openage has a certain area....that area is increased w/ teh larger throttle body, so the rpms are higher....itd be waaay less annoying in warm climates where it barely needs to warm up...

if no one wants mine, ill might just throw it back on in the spring...
PETERPOOPThread starterOahu · Nov 24, 2008#40
once i get my manifold, i might be messaging you.
gwasabiHonolulu, Hawaii · Nov 25, 2008#41
how big is the throttle body? is it like 3" diameter?
jkuchtaL.A. · Nov 25, 2008#42
Hey Barber, didn't I buy that TB from you like 6 months ago?
cali yarisCanoga Park, CA · Nov 26, 2008#43
???
thebarberGrand Rapids, MI · Nov 26, 2008#44
Originally Posted by jkuchta ↑
Hey Barber, didn't I buy that TB from you like 6 months ago?
i bought another one.... ;)
cali yarisCanoga Park, CA · Nov 26, 2008#45
"Throttle Bodies 'R Us"
jkuchtaL.A. · Nov 26, 2008#46
🙂gottcha
PETERPOOPThread starterOahu · Nov 26, 2008#47
jkuchta, you got any review on your tb you bought?
gwasabiHonolulu, Hawaii · Nov 26, 2008#48
Barber I sent you the money for it! THANKS!
thebarberGrand Rapids, MI · Nov 26, 2008#49
Originally Posted by gwasabi ↑
Barber I sent you the money for it! THANKS!
got it....ill be sending it out tomorrow
gwasabiHonolulu, Hawaii · Nov 26, 2008#50
shooootz