Yarisworld Archive

What temp to bake headlights?

24 posts · 10,221 views

PETERPOOPOriginal postOahu · Oct 30, 2008#1
Hi was wondering the temp and time you guys put your headlights in the oven before you pry them open. Also, i believe you put them back in the oven to reseal them. Correct? I will for sure reseal them with some silicone. Do I put silicone where the old sealant is and rebake to seal? or should i just try and reheat the old sealant squeeze it together one last time, then when cooled put silicone bead on the outside where the lens meets the housing.

I am hoping to take out the orange reflector this weekend.

*I'd like to hear the responses of people who've actually done it to their yaris headlights.

Thanks!

Replies 23

jambo101Montreal Canada · Oct 30, 2008#2
Why would you want to pry your headlights open?
battleversiontc808 · Oct 30, 2008#3
i think i seen a thread somewhere around here on this let me go look
PETERPOOPThread starterOahu · Oct 30, 2008#5
ah thanks man.i'm a newb
largeorangefontSo Cal, OC · Oct 30, 2008#6
200-210 for 5-7 minutes should do it. If you are having trouble, leave them in there for around 10.
PETERPOOPThread starterOahu · Oct 30, 2008#7
the link said not to leave them in there for 5-7 minutes straight. What am I suppose to do? Take it out every two minutes, let it cool for 10 seconds and then put it back in for the remaining time?

I guess I'll check the headlights every 3 minutes or so and try and pry it. if i can't, i'll put it in for another minute, then try and pry it again and repeat process until successfull.

i swear you are suppose to put the headlights back in the oven after you take them apart to reheat the existing seal. but that link didn't say to. he didn't even reseal the headlights with silicone though! So can I realllly trust him!? haha
DMartSouth GA · Oct 30, 2008#8
man the sealant that comes with the light is gonna be a pita to get back in place, i bought some sealant from autozone and replaced it
largeorangefontSo Cal, OC · Oct 30, 2008#9
I would get a friend and 2 hairdryers to reseal them. Each of you take a side and go around and heat the sealant, get it hot and push the halves back together.

Then I used Black RTV and run a bead of that around the seal after you are done just to make sure you cover any possible leaks.

Keep the oven as low as possible. It really depends on your oven, but just keep an eye on it.
PETERPOOPThread starterOahu · Oct 30, 2008#10
thanks guys. appreciate it a lot!
KCALB SIRAYVirginia · Oct 30, 2008#11
Lowest temp possible, you do not want to warp anything. I turned mine on to 300 then turned it off, let it sit for 10 minutes then popped them in the oven, laying them on a towel as to not melt anything. 5 minutes later it was ready to go.
ViolinNew Jersey · Nov 1, 2008#12
225 F for 5 minutes. Use a cookie sheet.

Pull off the old sealant and use this stuff:

Picture lost · img.photobucket.com
CarsonVancouver, BC · Apr 25, 2009#13
Originally Posted by PETERPOOP ↑
I am hoping to take out the orange reflector this weekend.
I also want to try that. Where you able to get the reflector out.
PETERPOOPThread starterOahu · Apr 25, 2009#14
i never attempted it. sorry
CarsonVancouver, BC · Apr 25, 2009#15
Well I'm heating up my oven now. I'll let you know how it works out.
PETERPOOPThread starterOahu · Apr 25, 2009#16
haha. good luck! post pics. don't forget to reseal them!
CarsonVancouver, BC · Apr 25, 2009#17
Well that was relatively painless the only hiccup was that my small apartment size oven was too small for me to close with the headlight in it.

I set my oven to 275 but i would recommend closer to 220 if you can get the oven door shut. I left it in for almost ten minutes and I put the headlight on a wet dishtowel on a baking sheet to keep the plastic from melting.

As you can see from the pictures after you remove the reflector there is a hole visible where the side marker light comes through. I'm not sure how it will look at night. I'm thinking of painting the reflector black or silver and then re-installing it. What do you think?
Photo 8.jpgPhoto 9.jpgPhoto 10.jpg
PETERPOOPThread starterOahu · Apr 25, 2009#18
good job!

Well If you don't like the bulb, you could always take it out. What is that bulb called? Is that the city light bulb or something. Is it just a plain color bulb? I would say take it out. Might look weird at night.
TamagoOff Grid · Apr 25, 2009#19
try exchanging the bulb for an amber one.. looks great.
PETERPOOPThread starterOahu · Apr 25, 2009#20
Right. Put a amber bulb in after he took out the amber reflector because he didn't want the amber there in the first place. Smart. More like get a chrome to amber bulb if you wanting to keep the bulb there if you don't decide to smoke the amber reflector and put it back in.


OP: It's probably not legal to take out the reflector where you live. So you COULD put an amber bulb in there and try and trick the guy, but just giving you a heads up.
TamagoOff Grid · Apr 25, 2009#21
Originally Posted by PETERPOOP ↑
Right. Put a amber bulb in after he took out the amber reflector because he didn't want the amber there in the first place. Smart. More like get a chrome to amber bulb if you wanting to keep the bulb there if you don't decide to smoke the amber reflector and put it back in.


OP: It's probably not legal to take out the reflector where you live. So you COULD put an amber bulb in there and try and trick the guy, but just giving you a heads up.
yes an amber bulb with "chrome" on it would be more shiney.
CarsonVancouver, BC · Apr 26, 2009#22
Ya, I was wondering about legality. I'm torn because I don't want a ticket but I like the all clear headlights like the Vitz has. I might have to compromise and leave a bit of the reflector so it looks something like this(BTW not my pic). But then again I'm not sure if its worth it.
Picture 1.png
PETERPOOPThread starterOahu · Apr 26, 2009#23
Well I don't know how it is where you live, but it'd be rare for a cop to give you a ticket just for your headlights. Most cops wouldn't even notice that you took out the orange reflector, unless you went to get a safety check or something. I wouldn't be TOO worried about it, but it's better to be safe than sorry?
slothman86Savannah, GA · Apr 27, 2009#24
just tint the orange reflector like i did!