so i have the mid pipe and i remember before the hack there was a "help!" part number for the o2 censor was wondering if anyone still had that part number as i wanna go there and get one
Nitto Mid-Pipe Check Engine Light fix
78 posts · 25,153 views · page 1 of 2
Replies 77
i believe its HELP part #4240 at any parts store.
anti seize
Found this link. Hopefully, this will work..
http://http://www.paladinmicro.com/M...Eliminator.htm
http://http://www.paladinmicro.com/M...Eliminator.htm
2 attachments not included in this copy
wow.
wow is right i never even knew you could do it that way
Lol. Trick-my-o2-sensor.com !
Did you have any problems with the mating of the mid-pipe? Someone out there had a source for a custom extension for the sensor. Can't remember who though. Been really considering getting this so I can add my header but waiting till the bugs are finally gone.
What some people have done is have the muffler shop weld a tight 90deg bung on the pipe which will then allow you to stack the two extenders without the sensor coming in contact with anything below. The wire is just barely long enough.
so....then 1 wont work?
E-mail this guy wayne92slc@yahoo.com he makes a piece that will move the o2 sensor far enough away from the gasses to the point where it doesnt set a CEL. he has them in stock $38 shipped. i will be ordering mine next week
Thanks Whooppee....saving that for later
To any who have the nitto, when you removed your stock mid, did you have a problem "unscrewing" the o2 sensor? I tried to remove it to wrap the midpipe with thermal wrap and it sun a couple of times then just seemed to wedge where it was. Anyone else have this happen?
To those with a custom midpipe...if i bring my car to have a custom mid made, should i assume that there will be no CEL issues or should i inform them of the issue? Also around how much did it run you guys? Thanks.
To those with a custom midpipe...if i bring my car to have a custom mid made, should i assume that there will be no CEL issues or should i inform them of the issue? Also around how much did it run you guys? Thanks.
jerkratt, need to use both of those defoulers...been using the defouler now for 1 week after i installed a new header, NO CEL!
kuro, u might just want to wait until the ecu relearns!
kuro, u might just want to wait until the ecu relearns!
The CEL is NOT an issue...😁 Is just the sensor doing it's job.Originally Posted by at3GG ↑To those with a custom midpipe...if i bring my car to have a custom mid made, should i assume that there will be no CEL issues or should i inform them of the issue? Also around how much did it run you guys? Thanks.
The function of the sensor behind the primary cat is to monitor the adecuate functionality of the cat converter.
When you remove / delete the cat converter the sensor obviously will sence a cat failure and throw a CEL.
The Nitto midpipe is a catless unit threfore it will trigger the CEL.
When you say you are going for a custom mide pipe are you planning to go catless also? If so you will have a CEL and you will need one of the already mentioned CEL fixes.
If you keep your cat or install a new cat to the custom midpipe you should be alright and will not need any fix.
Just my recomendation:
Keep the cat... the gains for going catless should be minimal on this engine. Just ask your shop to make your midpipe from the cat back...
^ didn't even notice that u only used one of them....yeah the other one might help!
A woman who enjoys going down on her car... 😁Originally Posted by kurokoma-kun ↑meh! i got these ramps that make it easy to get under the car, and i kinda like messing with it 😛
i put the 2nd antifouler on tonight, just had to drop the pipe off its hangers to get a bit more clearance 🙂
👏 besides that i do believe EVERYONE experiences a CEL with the defouler eventually.on the other hand the soldering of the wires looked to be a good deal though........Originally Posted by CASTREX ↑The CEL is NOT an issue...😁 Is just the sensor doing it's job.
The function of the sensor behind the primary cat is to monitor the adecuate functionality of the cat converter.
When you remove / delete the cat converter the sensor obviously will sence a cat failure and throw a CEL.
The Nitto midpipe is a catless unit threfore it will trigger the CEL.
When you say you are going for a custom mide pipe are you planning to go catless also? If so you will have a CEL and you will need one of the already mentioned CEL fixes.
If you keep your cat or install a new cat to the custom midpipe you should be alright and will not need any fix.
Just my recomendation:
Keep the cat... the gains for going catless should be minimal on this engine. Just ask your shop to make your midpipe from the cat back...
I wonder what the soldering of wires does to the fuel mappping, if anything.
As stated above, the second O2 sensor does not affect fuel mapping in any way, it is only in place to confirm to the ECU that the catalytic convertor is in place and functioning properly. Even with this sensor completely removed your performance and fuel mileage will not change.Originally Posted by Smokey159 ↑I wonder what the soldering of wires does to the fuel mappping, if anything.
No they don't. If you don't get a CEL in the first littel bit, you will probably never get one. I have been installing mechanical CEL fixes on my customer's cars for years. Some cars need 2, or the 90 degree bung method works as well.Originally Posted by ROCKLAND TOYOTA ↑👏 besides that i do believe EVERYONE experiences a CEL with the defouler eventually.on the other hand the soldering of the wires looked to be a good deal though........
I like the anti foulers better than the soldering method. The mechanical method can never fail.
😆 REALLY, please elighten us as to who accomplished this.Originally Posted by largeorangefont ↑No they don't. If you don't get a CEL in the first littel bit, you will probably never get one. I have been installing mechanical CEL fixes on my customer's cars for years. Some cars need 2, or the 90 degree bung method works as well.
I like the anti foulers better than the soldering method. The mechanical method can never fail.
if you have no problems GREAT but ive seen some on here who drove for 2 weeks with nothing and then BLAM...........Originally Posted by kurokoma-kun ↑yay! 100 miles with both antifoulers and no cel... in your opinion, is this a permanent fix? any idea what i can expect at next year's emissions test?
NO it just happens all of a sudden......Originally Posted by kurokoma-kun ↑for me its an experiment, if this thing doesn't fix it then it will be time for plan B 😉
however, i am wondering what you mean by BLAM 😲 something other than the cel go wrong?
I love innuendo... 😁 I know it's important to get tested regularly, but... 😆
Kuro, We don't have to smog this car here in CA for five years (then it's every other year). Do you have different rules there?
Kuro, We don't have to smog this car here in CA for five years (then it's every other year). Do you have different rules there?
I didnt mean "issue" like that castrex, i meant having the CEL come on and bug us as we drive. I know its just the ECU doing its job. If i do keep the cat like you suggest, will larger diameter piping after it do that much? Isn't the cat what is most restrictive on our cars? Or is it the small diameter piping?
I have seen the cats on the inside and they look good. Not very restrictive. Very similar to other expensive high flow cats I've seen.
On my car I did removed the secondary cat and leave the OE primary cat on as I saw no need to remove it.
To me the most restrictive part of the exhaust is the pipe between the resonator and the axle. It's all crushed.
If you are interested on making the most out of your exhaust go for some smooth mandrel bent pipe on 2". If you can't get a mandrel bent pipe go 2.25" pipe.
Removing the cats will net you maybe a couple hp at the top end of the power curve. If you are hardcore and want to go all out then go for it.
But for normal every day driving you won't feel a difference.
In my opinion unless you are planning on doing serious motorsports with your car it doesn't really worth it.
Eventually when you have to take your car to an inspection you will have to instal a cat again. If that is not a problem then do it.
On my car I did removed the secondary cat and leave the OE primary cat on as I saw no need to remove it.
To me the most restrictive part of the exhaust is the pipe between the resonator and the axle. It's all crushed.
If you are interested on making the most out of your exhaust go for some smooth mandrel bent pipe on 2". If you can't get a mandrel bent pipe go 2.25" pipe.
Removing the cats will net you maybe a couple hp at the top end of the power curve. If you are hardcore and want to go all out then go for it.
But for normal every day driving you won't feel a difference.
In my opinion unless you are planning on doing serious motorsports with your car it doesn't really worth it.
Eventually when you have to take your car to an inspection you will have to instal a cat again. If that is not a problem then do it.
You probably wont get a CEL , but if your state has a sniffer test, it will not pass without cats.Originally Posted by kurokoma-kun ↑oh! innuendo, eh... what i meant to say was, i've enjoyed wrapping both hands around the shaft of a tool and getting myself a nice long, fat, steely, sizzlin hot piece of PIPE! 😛😆🙄
yay! 100 miles with both antifoulers and no cel... in your opinion, is this a permanent fix? any idea what i can expect at next year's emissions test?
How hard is it to understand.. 1 or 2 antifoulers move the o2 sensor far enough out of the exhaust stream to not throw a Cat Inefficiency CEL when you are running catless.Originally Posted by ROCKLAND TOYOTA ↑😆 REALLY, please elighten us as to who accomplished this.
I've used this method on hundreds of cars.. Subarus, Evos, Toyotas, Mustangs etc.
I did this on my WRX about 6 years ago. I didnt know about antifoulers then, but this was cleaner.
Picture not included in this copy
Thanks castrex...I'll be leaving it right where it is. 👍
YEAH, thats cool and all but what you fail to realize is the LEARNING ecu that will eventually catch on and prove my point......Originally Posted by largeorangefont ↑How hard is it to understand.. 1 or 2 antifoulers move the o2 sensor far enough out of the exhaust stream to not throw a Cat Inefficiency CEL when you are running catless.
I've used this method on hundreds of cars.. Subarus, Evos, Toyotas, Mustangs etc.
I did this on my WRX about 6 years ago. I didnt know about antifoulers then, but this was cleaner.
Picture not included in this copy
Rockland,Originally Posted by ROCKLAND TOYOTA ↑YEAH, thats cool and all but what you fail to realize is the LEARNING ecu that will eventually catch on and prove my point......
Your ECU is not scouring the internet looking for proof that you have screwed with it.. and throwing CELs when you wake up in the morning.
What you fail to realize is how an ECU works. ECUs operate on voltage signals from sensors. When voltage is out of an acceptable range on a given sensor for a certain amount of time, an CEL is given (or worse, it depends on the sensor).
By wiring in a resistor to give the ECU a different voltage reading, or by mounting the o2 sensor out of the stream of exhaust you change the voltage sent to the ECU. If the "new" signal is within accepted limits, a CEL is never thrown. These limits don't change, and the ECU does no "learning" for the rear o2 sensor.
If you don't throw a CEL in the first couple days, or couple hundred miles, you will probably never see one for cat ineffiecicy. These types of CELS are not thrown right away because cats are less effective when cold, and the ECU is programmed to account for that. Again, no "learning" involved.
if im not mistaken this is almost exactly like the piece that the wayne guy makes, the guy whose email i listed earlierOriginally Posted by largeorangefont ↑How hard is it to understand.. 1 or 2 antifoulers move the o2 sensor far enough out of the exhaust stream to not throw a Cat Inefficiency CEL when you are running catless.
I've used this method on hundreds of cars.. Subarus, Evos, Toyotas, Mustangs etc.
I did this on my WRX about 6 years ago. I didnt know about antifoulers then, but this was cleaner.
Picture not included in this copy
👏 good explanation but i never said the wiring method was bad. just the foulerOriginally Posted by largeorangefont ↑Rockland,
Your ECU is not scouring the internet looking for proof that you have screwed with it.. and throwing CELs when you wake up in the morning.
What you fail to realize is how an ECU works. ECUs operate on voltage signals from sensors. When voltage is out of an acceptable range on a given sensor for a certain amount of time, an CEL is given (or worse, it depends on the sensor).
By wiring in a resistor to give the ECU a different voltage reading, or by mounting the o2 sensor out of the stream of exhaust you change the voltage sent to the ECU. If the "new" signal is within accepted limits, a CEL is never thrown. These limits don't change, and the ECU does no "learning" for the rear o2 sensor.
If you don't throw a CEL in the first couple days, or couple hundred miles, you will probably never see one for cat ineffiecicy. These types of CELS are not thrown right away because cats are less effective when cold, and the ECU is programmed to account for that. Again, no "learning" involved.
How much should a custom cat to axle exhaust run from a decent shop anyway?
The foulers do the same thing but mechanically. You are reducing the amount of exhaust gasses the sensor is exposed to, and skewing the reading. Some cars need 2 of them to keep from throwing CELs, one drilled for the sensor, and one undrilled.Originally Posted by ROCKLAND TOYOTA ↑👏 good explanation but i never said the wiring method was bad. just the fouler
Around $200-$250 depending on what muffler and tip you use.Originally Posted by at3GG ↑How much should a custom cat to axle exhaust run from a decent shop anyway?
If you use a turbo muffler and no tip you could probably get it under $200.
+1, I got my first custom one done for $280 in Van Nuys.
👏 ok so you finally got in your head what ive been saying except for the fact that even with the double fouler method that CEL still comes on. NO, who on here is running this setup and has no light.......Originally Posted by largeorangefont ↑The foulers do the same thing but mechanically. You are reducing the amount of exhaust gasses the sensor is exposed to, and skewing the reading. Some cars need 2 of them to keep from throwing CELs, one drilled for the sensor, and one undrilled.
no CEL!😎
Malaya, in 40 years when your car has over 5 million miles on it, you'll get a CEL -- Rockland knows. 🙂
See post #48.Originally Posted by ROCKLAND TOYOTA ↑👏 ok so you finally got in your head what ive been saying except for the fact that even with the double fouler method that CEL still comes on. NO, who on here is running this setup and has no light.......
I have this midpipe... since just about a year... and not a single CEL... 😁
Truth be told I am quite sure the USDM ECU is way more stringent on the emissions stuff, hence the trouble you've all been having :fronw:
Truth be told I am quite sure the USDM ECU is way more stringent on the emissions stuff, hence the trouble you've all been having :fronw:
yeah cause you just put this on a week ago or so correct???Originally Posted by Malaya1221 ↑no CEL!😎
see post 51Originally Posted by largeorangefont ↑See post #48.
That post would be great if it were correct. Again, that 02 sensor is just there to verify the cats are working.Originally Posted by ROCKLAND TOYOTA ↑see post 51
had it b4 for 6 months WITHOUT CEL turning on till WEAPON R header broke!Originally Posted by ROCKLAND TOYOTA ↑yeah cause you just put this on a week ago or so correct???
😆 awww should have done that right the first time.....Originally Posted by Malaya1221 ↑had it b4 for 6 months WITHOUT CEL turning on till WEAPON R header broke!
i forgot you're an expert on YARIS!🤷 the CEL will turn on in 40 years, but 4 now i should be happy with CEL off!👍Originally Posted by ROCKLAND TOYOTA ↑😆 awww should have done that right the first time.....
hey, if you want to call me an expert for installing parts back on correctly then so be it....Originally Posted by Malaya1221 ↑i forgot you're an expert on YARIS!🤷 the CEL will turn on in 40 years, but 4 now i should be happy with CEL off!👍